From: Vojtech Pavlik <vojtech@suse.cz>
To: Dan Hollis <goemon@anime.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: AMD viper chipset and UDMA100
Date: Fri, 28 Sep 2001 00:24:10 +0200 [thread overview]
Message-ID: <20010928002410.A18608@suse.cz> (raw)
In-Reply-To: <20010927235946.B18423@suse.cz> <Pine.LNX.4.30.0109271506030.19289-100000@anime.net>
In-Reply-To: <Pine.LNX.4.30.0109271506030.19289-100000@anime.net>; from goemon@anime.net on Thu, Sep 27, 2001 at 03:16:18PM -0700
On Thu, Sep 27, 2001 at 03:16:18PM -0700, Dan Hollis wrote:
> On Thu, 27 Sep 2001, Vojtech Pavlik wrote:
> > On Thu, Sep 27, 2001 at 02:26:50PM -0700, Sean Swallow wrote:
> > > I just got a tyan tiger w/ the AMD Viper chipset on it. For some reason
> > > Linux will only set the onboard (AMD viper) chains to UDMA33.
> > > I'm using linux 2.4.9, and I have also tried 2.4.10. Is there a limitation
> > > to the AMD Viper driver?
> > > PS. The cables (2) are BRAND new ata100 cables.
> > The Viper can do UDMA66 max. At least it's doing it for me quite well.
>
> If he's got the Tyan Tiger i'm thinking of, it's the Tyan S2460 with
> AMD766 southbridge. Tyan says it will do U100:
> http://www.tyan.com/products/html/tigermp.html
This southbridge is called Viper Plus as far as I know. In the past,
I've written a driver for this, but it didn't make it into the kernel,
because Andre also had his version.
> AMD does too:
> http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_873,00.html
>
> And I've got the same problem with my S2460:
>
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> AMD7411: IDE controller on PCI bus 00 dev 39
> AMD7411: chipset revision 1
> AMD7411: not 100% native mode: will probe irqs later
> AMD7411: disabling single-word DMA support (revision < C4)
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
> hda: 20010816 sectors (10246 MB) w/2048KiB Cache, CHS=1245/255/63, UDMA(33)
> hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
>
> But these drives will do U66/U100:
>
> And yes, I *DO* have the proper cables. These same drives connected to a
> Promise 20267 or a VIA KT133 with the same cables will do U66/U100
> perfectly.
Perhaps I could dig up my code and you can give it a test. Would you be
interested?
--
Vojtech Pavlik
SuSE Labs
next prev parent reply other threads:[~2001-09-27 22:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-27 21:26 Sean Swallow
2001-09-27 21:36 ` Nicholas Knight
2001-09-27 21:59 ` Vojtech Pavlik
2001-09-27 22:16 ` Dan Hollis
2001-09-27 22:24 ` Vojtech Pavlik [this message]
2001-09-27 22:54 ` Dan Hollis
2001-09-28 2:21 ` Jacob Luna Lundberg
2001-09-27 23:37 ` Sean Swallow
2001-09-28 10:21 ` [patch] " Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010928002410.A18608@suse.cz \
--to=vojtech@suse.cz \
--cc=goemon@anime.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®