From: safemode <safemode@speakeasy.net>
To: linux-kernel@vger.kernel.org, gadio@netvision.net.il
Subject: ide-scsi driver trouble in ac15
Date: Fri, 28 Sep 2001 00:07:37 -0400 [thread overview]
Message-ID: <20010928040722Z275827-760+17888@vger.kernel.org> (raw)
I'm not entirely sure if this is ac15's fault or the preempt patch acting up.
But this is very ide-scsi centric so i'm leaning towards ac15. I burned a cd
using my ide writer and it worked fine. Then i went to burn another and the
drive went into an infinite reset loop. like this.
SCSI bus is being reset for host 0 channel 0.
scsi0 : channel 0 target 0 lun 0 request sense failed, performing reset.
reloading the modules does nothing but report this error.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi0 : channel 0 target 0 lun 0 request sense failed, performing reset.
SCSI bus is being reset for host 0 channel 0.
Even though the modules were removed, the drive led is still blinking like it
was writing. If anyone needs some more info i'll try and get it.
the cdr did detect and work correctly at boot.
hardware:
Promise ide controller :
PDC20262: chipset revision 1
PDC20262: not 100% native mode: will probe irqs later
PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
CDR:
hde: CREATIVE CD-RW RW8438E, ATAPI CD/DVD-ROM drive
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: CREATIVE Model: CD-RW RW8438E Rev: FC03
Type: CD-ROM ANSI SCSI revision: 02
software:
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
linux-2.4.9-ac15-preempt-fix
next reply other threads:[~2001-09-28 4:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-28 4:07 safemode [this message]
2001-09-28 12:15 ` Jorge Nerín
2001-09-28 12:26 ` safemode
2001-09-28 18:31 ` bill davidsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010928040722Z275827-760+17888@vger.kernel.org \
--to=safemode@speakeasy.net \
--cc=gadio@netvision.net.il \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®