Problem creating filesystems (and othe operations) under 2.4.10

[quintaq@yahoo.co.uk]

Hello,

I am not subscribed to this list, so I would appreciate it if any replies
could be cc'd to me.

Is the following problem I have encountered symptomatic of a bug in 2.4.10?

I have just installed a Maxtor 30GB drive as /dev/hdc in my SuSE 7.0 system
which has a vanilla 2.4.10 kernel.  I found that I could write the
partition table and create a small ext2 partition for /boot plus 768MB of
swap.  Creation of the main ext2 filesystem on /hdc7 failed (before the
inode tables even began to be written), with "file size limit exceeded".
The same problem recurred every time I tried - and I did try various
combinations of partition size.  I see the same error message when trying
to change partition table flags.  The problem is identical using fdisk,
cfdisk and parted.  I have no file limits set in ulimit and I do not think
that this is the problem. 

I eventually put the same drive as /dev/hdc in another box running a stock
SuSE 2.2.16 kernel and creation of the filesystems completed without any
problem.  I have also verified this by booting this box using SuSE's 2.2.16
rescue kernel.

Any ideas?

Regards,

Geoff

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com