From: Christian Ullrich <chris@chrullrich.de>
To: Alexander Viro <viro@math.psu.edu>
Cc: Linus Torvalds <torvalds@transmeta.com>,
Vincent Sweeney <v.sweeney@dexterus.com>,
arvest@orphansonfire.com, linux-kernel@vger.kernel.org
Subject: Re: Partitioning problems in 2.4.11
Date: Fri, 12 Oct 2001 01:03:10 +0200 [thread overview]
Message-ID: <20011012010310.A1255@christian.chrullrich.de> (raw)
In-Reply-To: <20011012003148.B435@christian.chrullrich.de> <Pine.GSO.4.21.0110111854080.24742-100000@weyl.math.psu.edu>
In-Reply-To: <Pine.GSO.4.21.0110111854080.24742-100000@weyl.math.psu.edu>; from viro@math.psu.edu on Thu, Oct 11, 2001 at 06:59:03PM -0400
* Alexander Viro wrote on Thursday, 2001-10-11:
> On Fri, 12 Oct 2001, Christian Ullrich wrote:
>
> > a) -10-ac11, -10-ac12 and -12 with your patch all behave like -11.
>
> _Ouch_. So even bread()-based variant fails to read extended partition
> table in some cases.
>
> Hmm... Just in case - what processor are you using?
Full dmesg output from 2.4.10:
Linux version 2.4.10 (root@christian) (gcc version 2.95.3 20010315 (SuSE)) #1 Fri Oct 12 00:13:47 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffec000 (usable)
BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data)
BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
On node 0 totalpages: 262124
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32748 pages.
Kernel command line: auto BOOT_IMAGE=L ro root=802 BOOT_FILE=/boot/vmlinuz-2.4.10+line 3 2.4.10+l 2
Initializing CPU#0
Detected 1208.772 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2411.72 BogoMIPS
Memory: 1029868k/1048496k available (678k kernel code, 18240k reserved, 164k data, 168k init, 130992k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
PCI: Found IRQ 10 for device 00:0b.0
PCI: Sharing IRQ 10 with 00:11.0
Applying VIA southbridge workaround.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 599k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0c.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.1
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
Vendor: IBM Model: DNES-309170W Rev: SAH0
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:2): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: YAMAHA Model: CRW4416S Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:3): 8.333MB/s transfers (8.333MHz, offset 15)
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:6): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
scsi0:0:0:0: Tagged Queuing enabled. Depth 8
scsi0:0:6:0: Tagged Queuing enabled. Depth 8
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
Partition check:
sda:[63 16002]
sda1[16065 401625]
sda2[417690 8401995]
sda3[8819685 9092790]
sda4 <[8819748 5253192]
sda5[14073003 273042]
sda6[14346108 995967]
sda7[15342138 2570337]
sda8 >
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
sdb:[63 10490382]
sdb1[10490445 7164990]
sdb2[17655435 257040]
sdb4
reiserfs: checking transaction log (device 08:02) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 168k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 136512k swap-space (priority -1)
Adding Swap: 128512k swap-space (priority -2)
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
PDC20265: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
PCI: Sharing IRQ 10 with 00:0b.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:pio
hda: QUANTUM FIREBALLlct20 20, ATA DISK drive
hdb: FUJITSU MPG3409AT E, ATA DISK drive
hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(100)
hdb: 80063424 sectors (40992 MB) w/2048KiB Cache, CHS=79428/16/63, UDMA(100)
hda:[63 2104452]
hda1[2104515 37768815]
hda2 <[2104578 20980827]
hda5[23085468 48132]
hda6[23133663 16739667]
hda7 >
hdb:[63 10000305]
hdb1[10000368 68063184]
hdb2 <[10000431 20972889]
hdb5[48063519 30000033]
hdb6 >[78063552 1999872]
hdb3
Adding Swap: 999928k swap-space (priority -3)
reiserfs: checking transaction log (device 08:03) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:05) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:11) ...
Using tea hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:12) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:46) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ip_conntrack (8191 buckets, 65528 max)
PCI: Found IRQ 5 for device 00:09.0
PCI: Sharing IRQ 5 with 00:04.2
PCI: Sharing IRQ 5 with 00:04.3
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:09.0: 3Com PCI 3c905C Tornado at 0xa400. Vers LK1.1.16
----------------------------------------------------------------------------
Full dmesg output from 2.4.12+first-patch+line:
Linux version 2.4.12 (root@christian) (gcc version 2.95.3 20010315 (SuSE)) #1 Don Okt 11 23:51:44 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffec000 (usable)
BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data)
BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
On node 0 totalpages: 262124
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 32748 pages.
Kernel command line: auto BOOT_IMAGE=L ro root=802 BOOT_FILE=/boot/vmlinuz-2.4.12+patch+line 3 2.4.12+p+l 2
Initializing CPU#0
Detected 1208.767 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2411.72 BogoMIPS
Memory: 1029868k/1048496k available (674k kernel code, 18240k reserved, 164k data, 172k init, 130992k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Trying to stomp on Athlon bug...
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
PCI: Found IRQ 10 for device 00:0b.0
PCI: Sharing IRQ 10 with 00:11.0
Applying VIA southbridge workaround.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 603k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0c.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.1
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
Vendor: IBM Model: DNES-309170W Rev: SAH0
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:2): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: YAMAHA Model: CRW4416S Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:3): 8.333MB/s transfers (8.333MHz, offset 15)
Vendor: IBM Model: DNES-309170W Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:6): 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
scsi0:0:0:0: Tagged Queuing enabled. Depth 8
scsi0:0:6:0: Tagged Queuing enabled. Depth 8
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0
SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB)
Partition check:
sda:[63 16002]
sda1[16065 401625]
sda2[417690 8401995]
sda3[8819685 9092790]
sda4 <[8819748 5253192]
sda5[14073003 273042]
sda6[14346108 995967]
sda7[15342138 2570337]
sda8 >
SCSI device sdb: 17916240 512-byte hdwr sectors (9173 MB)
sdb:[63 10490382]
sdb1[10490445 7164990]
sdb2[17655435 257040]
sdb4
reiserfs: checking transaction log (device 08:02) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 172k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 136512k swap-space (priority -1)
Adding Swap: 128512k swap-space (priority -2)
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
PDC20265: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
PCI: Sharing IRQ 10 with 00:0b.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:pio, hdh:pio
hda: QUANTUM FIREBALLlct20 20, ATA DISK drive
hdb: FUJITSU MPG3409AT E, ATA DISK drive
hdc: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(100)
hdb: 80063424 sectors (40992 MB) w/2048KiB Cache, CHS=79428/16/63, UDMA(100)
hda:[63 2104452]
hda1[2104515 37768815]
hda2 <[2104578 20980827]
hda5[23085468 48132]
hda6[23133663 16739667]
hda7 >
hdb:[63 10000305]
hdb1[10000368 68063184]
hdb2 < >[78063552 1999872]
hdb3
Adding Swap: 999928k swap-space (priority -3)
reiserfs: checking transaction log (device 08:03) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:05) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:11) ...
Using tea hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 08:12) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
hdb6: bad access: block=128, count=2
end_request: I/O error, dev 03:46 (hdb), sector 128
read_super_block: bread failed (dev 03:46, block 64, size 1024)
hdb6: bad access: block=16, count=2
end_request: I/O error, dev 03:46 (hdb), sector 16
read_super_block: bread failed (dev 03:46, block 8, size 1024)
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ip_conntrack (8191 buckets, 65528 max)
PCI: Found IRQ 5 for device 00:09.0
PCI: Sharing IRQ 5 with 00:04.2
PCI: Sharing IRQ 5 with 00:04.3
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:09.0: 3Com PCI 3c905C Tornado at 0xa400. Vers LK1.1.16
--
Christian Ullrich Registrierter Linux-User #125183
"Sie können nach R'ed'mond fliegen -- aber Sie werden sterben"
next prev parent reply other threads:[~2001-10-11 23:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-11 20:00 Alexander Viro
2001-10-11 22:31 ` Christian Ullrich
2001-10-11 22:59 ` Alexander Viro
2001-10-11 23:03 ` Christian Ullrich [this message]
2001-10-11 23:10 ` Jeff Garzik
2001-10-11 23:22 ` Alexander Viro
2001-10-11 23:28 ` David S. Miller
2001-10-11 23:27 ` David S. Miller
2001-10-11 23:34 ` Stephan von Krawczynski
2001-10-11 23:43 ` Alexander Viro
2001-10-11 22:42 ` Alexander Viro
2001-10-11 23:08 ` Christian Ullrich
2001-10-11 23:19 ` Alexander Viro
2001-10-11 23:55 ` [PATCH] " Alexander Viro
2001-10-12 10:19 ` Vincent Sweeney
2001-10-11 23:30 ` Alexander Viro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011012010310.A1255@christian.chrullrich.de \
--to=chris@chrullrich.de \
--cc=arvest@orphansonfire.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
--cc=v.sweeney@dexterus.com \
--cc=viro@math.psu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®