From: Tetsuji Rai <tetsuji@rai.sytes.net>
To: linux-kernel@vger.kernel.org
Subject: bttv module intialization takes much time on kernel-2.4.x
Date: Sat, 24 Nov 2001 01:54:00 +0900 [thread overview]
Message-ID: <200111231654.fANGs0705731@rai.sytes.net> (raw)
Title says it all. I use bttv module. When invoking "modprobe bttv" it
takes several minutes to initialize. When I used kernel-2.2.x it was very
quick, but with kernel-2.4.x it takes a while. But after that, it works
fine.
I don't know why. Any solutions?? or am I doing anything wrong?
For your reference, I use BT878 based card, kernel-2.4.15-pre8 for now and
dmesg gives these messages:
----snip----snip-----
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub
bttv: Bt8xx card found (0).
PCI: Found IRQ 5 for device 02:05.0
PCI: Sharing IRQ 5 with 02:05.1
bttv0: Bt878 (rev 17) at 02:05.0, irq: 5, latency: 32, memory: 0xe0000000
bttv0: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
------snip-----snip------
TIA
--
Tetsuji Rai (in Tokyo)
http://www.geocities.com/tetsuji_rai
Fax: +1-708-570-4868 (in the US)
next reply other threads:[~2001-11-23 16:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-23 16:54 Tetsuji Rai [this message]
2001-11-23 17:28 ` Gerd Knorr
2001-11-28 14:18 ` Adrian Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200111231654.fANGs0705731@rai.sytes.net \
--to=tetsuji@rai.sytes.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®