From: Iain <iain@minihub.org>
To: linux-kernel@vger.kernel.org
Subject: [OOPS] pcnet_cs
Date: Sat, 24 Nov 2001 14:03:31 +1100 [thread overview]
Message-ID: <20011124030624Z282353-17408+19122@vger.kernel.org> (raw)
Hi,
I have been experiencing problems with my PCMCIA ethernet card. I think there
may be an underlying hardware problem but it works with some versions of the
kernel (and win 98).
The problem is as follows. If I boot up kernel 2.4.15 (and 2.4.14) with the
card inserted when cardmanager starts I get:
eth0: interrupt from stopped card
At this stage the system hangs. If i remove the card the above message fills
the screen.
The same thing happens if i insert the card after booting.
However in 2.4.13 if i insert the card after booting i see different
behaviour. Firstly I have to insert the card, remove it and then insert it
again. It now works fine.
In kernel versions previous to this it worked fine from bootup.
My setup is as follows.
Acer Travelmate 514T
Surecom EP-427 ethernet card
192 MB RAM.
from /var/log/dmesg:
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000007
Yenta IRQ list 0cb8, PCI irq9
Socket status: 30000007
pcmcia-cs version 3.1.29
jackal:/usr/src/linux/drivers# cat /proc/interrupts
CPU0
0: 132929 XT-PIC timer
1: 2923 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 6512 XT-PIC serial
5: 11136 XT-PIC ES1938
8: 1 XT-PIC rtc
9: 19 XT-PIC O2 Micro, Inc. 6832, O2 Micro, Inc. 6832 (#2)
10: 44 XT-PIC usb-ohci
11: 2154 XT-PIC pcnet_cs
12: 42917 XT-PIC PS/2 Mouse
14: 14554 XT-PIC ide0
15: 3 XT-PIC ide1
NMI: 0
ERR: 0
jackal:/usr/src/linux/drivers# lspci
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1621 (rev 05)
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5247 (rev 01)
00:06.0 Communication controller: Lucent Microelectronics WinModem 56k (rev
01)
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV] (rev 0a)
00:08.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive
(rev 02)
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev 20)
00:11.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU (rev 09)
00:13.0 CardBus bridge: O2 Micro, Inc. 6832 (rev 34)
00:13.1 CardBus bridge: O2 Micro, Inc. 6832 (rev 34)
00:14.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
01:00.0 VGA compatible controller: Neomagic Corporation [MagicMedia 256AV]
(rev 20)
--
public key available at http://www.minihub.org/~iain/iain.asc
reply other threads:[~2001-11-24 3:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011124030624Z282353-17408+19122@vger.kernel.org \
--to=iain@minihub.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®