From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 20 Dec 2001 08:26:54 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 20 Dec 2001 08:26:45 -0500 Received: from relay.planetinternet.be ([194.119.232.24]:58885 "EHLO relay.planetinternet.be") by vger.kernel.org with ESMTP id ; Thu, 20 Dec 2001 08:26:33 -0500 Message-Id: <200112201326.fBKDQQm28645@relay.planetinternet.be> Content-Type: text/plain; charset=US-ASCII From: Michele Gius Reply-To: mgius@pi.be Subject: CD-ROM read problem introdruced in 2.4.x and 2.5.x ? Date: Thu, 20 Dec 2001 14:26:10 +0100 X-Mailer: KMail [version 1.3.1] MIME-Version: 1.0 Content-Transfer-Encoding: 7BIT To: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I tried this on 2 different systems: 1. Pentium 2/ Intel 440LX / SCSI System with Plextor PX32TS and Yamaha CDR400t on aic7880 2. Athlon 1500XP / Via KT266A (vt8233) / IDE System with Plextor 24/10/40A (DMA off :-( ) and LiteOn DVD-ROM LTD163 A CD-R with mp3 songs (Maxell 74 min. 6x blue writing side): It reads and plays well on all 4 drives of the 2 machines under kernel 2.2.18 and 2.2.19 as well as under Windows. It cannot be read and played under: 2.4.0 (both machines) 2.4.10 (both machines) 2.4.15 (ide, scsi not tested) 2.4.16 (both machines) 2.5.1-pre9 (ide, scsi not tested) The errors occur always in the same regions of the disk with slight differences between drives so it probably has errors but they seem to be handled less tolerantly. Related?: While copying from a CD under the 2.4 kernels the system load on the IDE machine goes up to 75 percent even for the LiteOn drive with DMA on, while on 2.2.19 it never exceeds 10% even for the Plextor with DMA off and it is slightly faster. --------------------------- Errors from IDE machine (hdb is LiteOn, hdc is Plextor with ide-scsi): : hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error } : hdb: drive_cmd: error=0x04 : scsi0: ERROR on channel 0, id 0, lun 0, CDB: 0x03 00 00 00 40 00 : Info fld=0x4d0, Current sd0b:00: sns = f0 3 : ASC= 6 ASCQ= 0 : Raw sense data:0xf0 0x00 0x03 0x00 0x00 0x04 0xd0 0x0a 0x00 0x00 0x : I/O error: dev 0b:00, sector 4928 ------------------- Errors from SCSI machine: : scsi0: ERROR on channel 0, id 4, lun 0, CDB: 0x28 00 00 00 04 d5 00 00 01 00 : Info fld=0x4d5 (nonstd), Current sd0b:01: sns = 70 3 ^^^^^^^^^^^^^^^^^^^^^^ Is this a hint ? : ASC= 6 ASCQ= 0 : Raw sense data:0x70 0x00 0x03 0x00 0x00 0x04 0xd5 0x0a 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 0x00 0x00 : I/O error: dev 0b:01, sector 4948 --------------------- CD-Info from debug mode: cdrom: entering cdrom_count_tracks cdrom: track 1: format=2, ctrl=4 cdrom: track 2: format=2, ctrl=5 cdrom: disc has 2 tracks: 0=audio 2=data 0=Cd-I 0=XA ... cdrom: entering CDROMMULTISESSION cdrom: CDROMMULTISESSION successful ISO 9660 Extensions: Microsoft Joliet Level 3 ISOFS: changing to secondary root -------------------- Sorry for this long post. I know it is quite general but if there is any further useful information I can supply. Kind regards Michele Gius