I also tried and neither worked for me, though I
appreciate the effort :)

I did get a couple of other messages, if this helps: 

Assertion failed! chan->is_active ==
sg(chan->iobase),via82cxxx_audio.c,via_chan_maybe_start,line=1198

(typed by hand as I'm on another computer)

I got that using the eapd_init2_ops.

Note: the patch was missing prototypes for
eapd_on_control and eapd_off_control. Also my 
sound chip is 0x41445361 not 0x41445461, so 
I added that entry.

Paul

--- Jeremy Lumbroso <j.lumbroso@noos.fr> wrote:
> hi 
> i apply the patch and compile with the two values
> but i still heard no sound .
> Did someone got this driver works ?
> thx 
> 
> 
> Le Lundi 14 Janvier 2002 18:13, salvador a écrit :
> > As Alan says: "The VIA driver doesnt appear to
> support the ac97 ops."
> > Here I'm attaching a brut force test, I created a
> small function that turns
> > ON the EAPD and another to turn it OFF. Note that
> according to dataseets a
> > 1 will disable the external amplifier, but you
> should try with the two
> > values. I attached the modified code. It have a
> 1886 entry that will
> > initialize the codec setting EAPD output to 0. The
> code have a commented
> > entry that does the reverse, try both.
> > I also attached the diffs so Alan can check if
> that could work.
> > Note: I didn't compile it so watch for typos ;-)
> >
> > SET
> 
> -- 
> __________________________
> Lumbroso Jeremy
> 188 bd malesherbes 
> 75017 PARIS
> 01,47,64,07,94
> 06,19,77,01,25
> __________________________


__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/