mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nicholas Lee <nj.lee@plumtree.co.nz>
To: Ville Herva <vherva@niksula.hut.fi>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Disk corruption - Abit KT7, 2.2.19+ide patches
Date: Wed, 16 Jan 2002 10:37:03 +1300	[thread overview]
Message-ID: <20020115213703.GD598@inktiger.kiwa.co.nz> (raw)
In-Reply-To: <20020115202302.GA598@inktiger.kiwa.co.nz> <20020115205116.GH51648@niksula.cs.hut.fi> <20020115211032.GC598@inktiger.kiwa.co.nz>
In-Reply-To: <20020115211032.GC598@inktiger.kiwa.co.nz>


Reposting as the linux mailing message bounced.

Problem with:
<linux-kernel@vger.rutgers.edu>:
128.6.14.121 does not like recipient.
Remote host said: 550 <linux-kernel@vger.rutgers.edu>... User unknown
Giving up on 128.6.14.121.


On Wed, Jan 16, 2002 at 10:10:32AM +1300, Nicholas Lee wrote:
> On Tue, Jan 15, 2002 at 10:51:16PM +0200, Ville Herva wrote:
> > 
> > We are seeing corruption on KT7-RAID as well. But it's HPT370 only, and
> > looks to be pci transfer corruption. It seems depended on which pci slots
> > are populated (short story - expect full coverage on linux-kernel later this
> > week as we finish our tests.)
> 
> Interesting. I'd had a feeling that its related to the PCI bus and
> network traffic.
> 
> 
> > We tried a number of bioses.
> > 
> > A question: what pci cards do you have and in which slots?
> 
> 
> Hoppa is the current problem machine, woodcut only has periodic problem
> notice even though it has the higher load and is in a different city.
> 
> 
> 
> [nic@woodcut:~] sudo lspci
> 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
> 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
> 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10)
> 00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> 00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> 00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
> 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
> 00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
> 00:11.0 VGA compatible controller: Number 9 Computer Company Imagine 128 T2R [Ticket to Ride]
> 
> 
> eth0      Interrupt:11 Base address:0xdc00 
> 
> 
> 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
> 	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> 	Flags: bus master, medium devsel, latency 32, IRQ 11
> 	I/O ports at dc00
> 	Memory at d6811000 (32-bit, non-prefetchable)
> 
> 
> 
> nic@hoppa:~$ sudo lspci
> 00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
> 00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
> 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10)
> 00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> 00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
> 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
> 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev d2)
> 
> 
> 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RT8139 (rev 10)
> 	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> 	Flags: bus master, medium devsel, latency 32, IRQ 11
> 	I/O ports at ec00
> 	Memory at e6800000 (32-bit, non-prefetchable)
> 
> eth0      Interrupt:11 Base address:0xec00 
> 
> 
> 
> > (Your problem may be - and propably is - a completely separate issue than
> > ours, but I'd like to know.)
> 
> Looks like the active NIC is in the same slot on both machines. 
> 
> > 
> > Alternatively, you may want to try 
> > (1) 2.2.20pre2 that notably includes Via chipset fixes
> > (2) The ide patch from Krzysztof Oledzki <ole@ans.pl>, which includes
> >     2.4 Via ide driver backport (http://www.ans.pl/ide)
> 
> I'll try this, but it'll have to be next week. Busy at the moment.
> 
> I suspect that the drive is now full of bad sectors, it might be
> troublesome compiling. 8-\
> 
> -- 
> Nicholas Lee - nj.lee at plumtree.co dot nz, somewhere on the fish Maui caught.
> gpg. 8072 4F86 EDCD 4FC1 18EF  5BDD 07B0 9597 6D58 D70C            icq. 1612865 
> 
>                          Quixotic Eccentricity

-- 
Nicholas Lee - nj.lee at plumtree.co dot nz, somewhere on the fish Maui caught.
gpg. 8072 4F86 EDCD 4FC1 18EF  5BDD 07B0 9597 6D58 D70C            icq. 1612865 

                         Quixotic Eccentricity

  parent reply	other threads:[~2002-01-15 21:37 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-01-15 20:23 Nicholas Lee
     [not found] ` <20020115205116.GH51648@niksula.cs.hut.fi>
     [not found]   ` <20020115211032.GC598@inktiger.kiwa.co.nz>
2002-01-15 21:37     ` Nicholas Lee [this message]
     [not found]     ` <20020115214049.GI51648@niksula.cs.hut.fi>
2002-01-15 22:02       ` Nicholas Lee
2002-01-15 22:59         ` Ed Sweetman
2002-01-15 23:13           ` Nicholas Lee
2002-01-16  7:07           ` Ville Herva
2002-01-19  2:40             ` Nicholas Lee
2002-01-19 10:44               ` Ville Herva
2002-01-24 22:40 ` 2.4.18-pre3-ac2 still having problems (was Disk corruption - Abit KT7, 2.2.19+ide patches) Nicholas Lee
2002-01-26 13:10   ` Hans-Peter Jansen
2002-01-25  1:14 ` Disk corruption - Abit KT7, 2.2.19+ide patches Tim Moore

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20020115213703.GD598@inktiger.kiwa.co.nz \
    --to=nj.lee@plumtree.co.nz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vherva@niksula.hut.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®