From: Its Squash <squash2@dropnet.net>
To: linux-kernel@vger.kernel.org
Subject: 2.5.3-pre4 ide problems
Date: Thu, 24 Jan 2002 11:21:56 -0600 [thread overview]
Message-ID: <200201241721.g0OHLvc00955@linux.local> (raw)
Greetings,
I have a Compaq Evo n600c laptop, which has Intel ICH3 IDE onboard as well as
CMD646 IDE on my docking station. I have been runing 2.5.1 just fine for a
while. Today I tried 2.5.3-pre4 and I bomb on boot.
The IDE part of dmesg from 2.5.1 says:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller on PCI slot 00:1f.1
PCI: Device 00:1f.1 not available because of resource collisions
ICH3: chipset revision 1
ICH3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x5060-0x5067, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x5068-0x506f, BIOS settings: hdc:DMA, hdd:pio
CMD646: IDE controller on PCI slot 05:07.0
CMD646: chipset revision 7
CMD646: 100% native mode on irq 11
ide2: BM-DMA at 0x2040-0x2047, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x2048-0x204f, BIOS settings: hdg:pio, hdh:pio
hda: TOSHIBA MK2018GAP, ATA DISK drive
hdc: Compaq DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
on 2.5.3-pre4, undocked, it says:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller on PCI slot 00:1f.1
PCI: Device 00:1f.1 not available because of resource collisions
ICH3: (ide_setup_pci_device:) Could not enable device.
hda: TOSHIBA MK2018GAP, ATA DISK drive
hdc: Compaq DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39070080 sectors (20004 MB), CHS=2584/240/63
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache
on 2.5.3-pre4, docked, it says:
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller on PCI slot 00:1f.1
PCI: Device 00:1f.1 not available because of resource collisions
ICH3: (ide_setup_pci_device:) Could not enable device.
CMD646: IDE controller on PCI slot 05:07.0
CMD646: chipset revision 7
CMD646: 100% native mode on irq 11
ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:pio, hdd:pio
Josh
reply other threads:[~2002-01-24 17:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200201241721.g0OHLvc00955@linux.local \
--to=squash2@dropnet.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®