From: "Marcel J.E. Mol" <marcel@mesa.nl>
To: linux-kernel@vger.kernel.org
Subject: AIC7xxx error with Minolta scanner
Date: Mon, 4 Feb 2002 22:53:03 +0100 [thread overview]
Message-ID: <20020204225303.A3997@joshua.mesa.nl> (raw)
Hi,
Trying to get a Minolta dimage scan dual (photo scanner) using an
Adaptec AHA-2940 Ultra scsi controller gave the following error:
Feb 4 22:30:27 rim kernel: PCI: Found IRQ 5 for device 00:0a.0
Feb 4 22:30:27 rim kernel: scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
Feb 4 22:30:27 rim kernel: <Adaptec 2940 SCSI adapter>
Feb 4 22:30:27 rim kernel: aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
Feb 4 22:30:27 rim kernel:
Feb 4 22:30:43 rim kernel: scsi2: brkadrint, Scratch or SCB Memory Parity Error at seqaddr = 0x1
Feb 4 22:30:43 rim kernel: scsi2: Dumping Card State while idle, at SEQADDR 0x1
Feb 4 22:30:43 rim kernel: ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
Feb 4 22:30:43 rim kernel: HCNT = 0x0
Feb 4 22:30:43 rim kernel: SCSISEQ = 0x12, SBLKCTL = 0x0
Feb 4 22:30:43 rim kernel: DFCNTRL = 0x4, DFSTATUS = 0x6d
Feb 4 22:30:43 rim kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
Feb 4 22:30:43 rim kernel: SSTAT0 = 0x5, SSTAT1 = 0x0
Feb 4 22:30:43 rim kernel: STACK == 0x17, 0x186, 0x0, 0x0
Feb 4 22:30:43 rim kernel: SCB count = 4
Feb 4 22:30:43 rim kernel: Kernel NEXTQSCB = 2
Feb 4 22:30:43 rim kernel: Card NEXTQSCB = 2
Feb 4 22:30:43 rim kernel: QINFIFO entries:
Feb 4 22:30:43 rim kernel: Waiting Queue entries:
Feb 4 22:30:43 rim kernel: Disconnected Queue entries:
Feb 4 22:30:43 rim kernel: QOUTFIFO entries:
Feb 4 22:30:43 rim kernel: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Feb 4 22:30:43 rim kernel: Pending list:
Feb 4 22:30:43 rim kernel: Kernel Free SCB list: 3 1 0
Feb 4 22:30:49 rim kernel: scsi2:0:1:0: Attempting to queue an ABORT message
Feb 4 22:30:49 rim kernel: scsi2: Dumping Card State while idle, at SEQADDR 0x18
Feb 4 22:30:49 rim kernel: ACCUM = 0x0, SINDEX = 0x0, DINDEX = 0x0, ARG_2 = 0x0
Feb 4 22:30:49 rim kernel: HCNT = 0x0
Feb 4 22:30:49 rim kernel: SCSISEQ = 0x0, SBLKCTL = 0xc0
Feb 4 22:30:49 rim kernel: DFCNTRL = 0x0, DFSTATUS = 0x29
Feb 4 22:30:49 rim kernel: LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x0
Feb 4 22:30:49 rim kernel: SSTAT0 = 0x0, SSTAT1 = 0x8
Feb 4 22:30:49 rim kernel: STACK == 0x17, 0x0, 0x0, 0x0
Feb 4 22:30:49 rim kernel: SCB count = 4
Feb 4 22:30:49 rim kernel: Kernel NEXTQSCB = 3
Feb 4 22:30:49 rim kernel: Card NEXTQSCB = 0
Feb 4 22:30:49 rim kernel: QINFIFO entries: 3 2
Feb 4 22:30:49 rim kernel: Waiting Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255
Feb 4 22:30:49 rim kernel: Disconnected Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255
Feb 4 22:30:49 rim kernel: QOUTFIFO entries:
Feb 4 22:30:49 rim kernel: Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Feb 4 22:30:49 rim kernel: Pending list: 2
Feb 4 22:30:49 rim kernel: Kernel Free SCB list: 1 0
Feb 4 22:30:49 rim kernel: Untagged Q(1): 2
Feb 4 22:30:49 rim kernel: DevQ(0:1:0): 0 waiting
Feb 4 22:30:49 rim kernel: qinpos = 0, SCB index = 3
Feb 4 22:30:49 rim kernel: Kernel panic: Loop 1
Feb 4 22:30:49 rim kernel:
This is on liunx-2.4.18-pre7-ac3.
The scanner is the only device on the scsi controller.
>From above I don't know if this really has to do with the scanner
or if it is the contrller itself, but during boot of the system
the scanner is seen by the 2940...
-Marcel
--
======-------- Marcel J.E. Mol MESA Consulting B.V.
=======--------- ph. +31-(0)6-54724868 P.O. Box 112
=======--------- marcel@mesa.nl 2630 AC Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
They couldn't think of a number, Linux user 1148 -- counter.li.org
so they gave me a name! -- Rupert Hine -- www.ruperthine.com
reply other threads:[~2002-02-04 21:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020204225303.A3997@joshua.mesa.nl \
--to=marcel@mesa.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®