From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Fri, 29 Mar 2002 12:29:19 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Fri, 29 Mar 2002 12:29:15 -0500 Received: from relay.publinet.it ([151.99.137.5]:57550 "EHLO relay.publinet.it") by vger.kernel.org with ESMTP id ; Fri, 29 Mar 2002 12:29:00 -0500 Date: Fri, 29 Mar 2002 18:28:54 +0100 From: Luca Maranzano To: arrays@compaq.com Cc: linux-kernel@vger.kernel.org Subject: Compaq Smart2 driver bug with Linux 2.4.18 and HIGHMEM ? Message-ID: <20020329172854.GA28895@publinet.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.24i Organization: SIR s.r.l. - PublinetWork(tm) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi, we've tryed to compile Linux Kernel 2.4.18 on a Compaq Proliant ML370 G2, Pentium III 1.13Ghz, 1GB RAM, 2x36.4GB HD and SCSI Controller Compaq Smart2 5i, firmware version 1.80. The problem is that if we enable the CONFIG_NOHIGHMEM to 4GB in order to enable full 1GB support, the kernel will panic saying that it cannot correctly access the /dev/cciss/c0d0p1 root partition. Disabling the CONFIG_NOHIGHMEM support all works fine. Is this a known issue? More info about our setup: Debian 3.0 gcc version 2.95.4 Let me know if you need more info. TIA. Kind regards, Luca