Linux version 2.4.19-pre5-ac3-c2 (root@agamemnon) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Fri Apr 12 19:44:24 EDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000018000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) On node 0 totalpages: 98304 zone(0): 4096 pages. zone(1): 94208 pages. zone(2): 0 pages. Kernel command line: BOOT_FILE=/boot/2.4.19-pre5-ac3-c2/vmlinuz-2.4.19-pre5-ac3-c2 root=/dev/hda2 ro Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 995.766 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1985.74 BogoMIPS Memory: 385704k/393216k available (1209k kernel code, 7124k reserved, 411k data, 240k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 995.7881 MHz. ..... host bus clock speed is 199.1576 MHz. cpu: 0, clocks: 1991576, slice: 995788 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router SIS [1039/0008] at 00:02.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: Printer, EPSON Stylus COLOR 640 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (polling). lp0: console ready Real Time Clock Driver v1.10e block: 736 slots per queue, batch=184 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 15 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SiS735 ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD800BB-00CAA0, ATA DISK drive hdc: DVDROM 10X, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 SCSI subsystem driver Revision: 1.00 usb.c: registered new driver usbdevfs usb.c: registered new driver hub SiS router pirq escape (99) SiS router pirq escape (99) usb-ohci.c: USB OHCI at membase 0xd8802000, IRQ 10 usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] 7001 (#2) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected PCI: Found IRQ 12 for device 00:02.2 usb-ohci.c: USB OHCI at membase 0xd8804000, IRQ 12 usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. hub.c: USB new device connect on bus1/1, assigned device number 2 hub.c: USB hub found hub.c: 4 ports detected (recovery.c, 254): journal_recover: JBD: recovery, exit status 0, recovered transactions 60020 to 60655 (recovery.c, 256): journal_recover: JBD: Replayed 1998 and revoked 11/12 blocks hub.c: USB new device connect on bus1/1/1, assigned device number 3 usb.c: USB device 3 (vend/prod 0x553/0x202) is not claimed by any active driver. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 240k freed spurious 8259A interrupt: IRQ7. hub.c: USB new device connect on bus2/1, assigned device number 2 input0: USB HID v1.00 Mouse [Cypress Sem. PS2/USB Browser Combo Mouse] on usb2:2.0 Adding Swap: 999928k swap-space (priority -1) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal sis900.c: v1.08.03 2/1/2002 PCI: Assigned IRQ 11 for device 00:03.0 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:d0:09:e4:9a:64. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: DVDROM 1 Model: 0X Rev: 40 Type: CD-ROM ANSI SCSI revision: 02 PCI: Found IRQ 5 for device 00:0d.0 EATA/DMA 2.0x: Copyright (C) 1994-2002 Dario Ballabio. EATA config options -> tc:n, lc:y, mq:16, rs:y, et:n. EATA0: 2.0C, PCI 0xd810, IRQ 5, BMST, SG 122, MB 64. EATA0: SCSI channel 0 enabled, host target ID 7. scsi1 : EATA/DMA 2.0x rev. 6.50.00 Vendor: UMAX Model: Astra 1220S Rev: V1.1 Type: Scanner ANSI SCSI revision: 02 EATA0: scsi1, channel 0, id 1, lun 0, cmds/lun 2. Attached scsi generic sg1 at scsi1, channel 0, id 1, lun 0, type 6 i2c-core.o: i2c core module i2c-isa.o version 2.6.3 (20020322) i2c-core.o: adapter ISA main adapter registered as adapter 0. i2c-isa.o: ISA bus access for i2c modules initialized. i2c-proc.o version 2.6.1 (20010825) it87.o version 2.6.3 (20020322) i2c-core.o: driver IT87xx sensor driver registered. i2c-core.o: client [IT87 chip] registered to adapter [ISA main adapter](pos. 0). inserting floppy driver for 2.4.19-pre5-ac3-c2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Media Link On 100mbps full-duplex PCI: Found IRQ 5 for device 00:11.0