From: jordan.breeding@attbi.com
To: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: Trouble rebooting Tyan Thunder K7 (S2462UNG)
Date: Sat, 20 Apr 2002 12:58:55 +0000 [thread overview]
Message-ID: <20020420125857.RTSP1102.rwcrmhc54.attbi.com@rwcrwbc55> (raw)
Sorry that I did not explain myself better the first time.
The other OSes on this machine _do_ initialize a
cold boot. Here is how they _all_ reboot: screen
immediately goes black, hd light comes on as
memory is ECC checked, hd light goes off and BIOS
post screen comes up (monitor is now on again),
Adaptec SCSISelect screen comes up, BIOS issues
single beep and boots into GRUB. This is the way
that _all_ versions of linux reboot with _all_ reboot
parameters: screen hangs (but still has text on it, ie.
the reboot messages) for at least 15-30 seconds,
screen then goes blank, hd light comes on but _not_
for ecc check (during ecc check nothing is accessed
except for memory) instead the system goes straight
into SCSISelect once the screen goes blank and the
hd light comes on (this is evident because during
normal boot SCSISelect is the stage at which the hd
light is on and each SCSI device is accessed in
order), once SCSISelect has polled every id on the
system it tries to hand back off to the BIOS which
was apparently never initialized correctly during a
Linux reboot since it issues a very weird series of
eight or so BIOS beeps and then just sits there, the
ecc memory is never polled, the BIOS post screen
never comes up, the monitor never goes active
again, the system is just hung at a black screen until
I hard reboot it. Other OSes _do_ perform a reboot
in which ecc memory is polled however, so that
does not seem to be the problem here. Thanks for
any more help anyone can offer.
Jordan Breeding
> On Fri, 2002-04-19 23:15:23 -0000, Jordan Breeding <jordan.breeding@attbi.com>
> wrote in message
> <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAjQHXypTRWUeX0Da3WGxUUMKAAAAQAAAA
> b2jlXi9TM0a+IKeYbO47lAEAAAAA@attbi.com>:
> > I am having trouble getting a brand new Tyan Thunder K7 S2462UNG (the
> > one with onboard SCSI) to reboot successfully using Linux. This board
>
> > FreeBSD do with this board, instead the text stays there for at least
> > 15-20 seconds (maybe longer) then when it finally blanks the video and
> > the monitor light begins to flash it goes straight into the Adaptec
> > SCSISelect scan (I can tell because my HD light comes on and the CDROMs
>
> What is so uncommon? The board does use ECC RAM, so maybe the board's
> BIOS / firmware needs this time to blank and check all the RAM. Maybe
> othe OSes don't initiate a full "cold boot" but something that doesn't
> make the board to re-initialize all the RAM...
>
> MfG, JBG
>
> --
> Jan-Benedict Glaw . jbglaw@lug-owl.de . +49-172-7608481
> -- New APT-Proxy written in shell script --
> http://lug-owl.de/~jbglaw/software/ap2/
>
next reply other threads:[~2002-04-20 12:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-20 12:58 jordan.breeding [this message]
[not found] <scc3ce39.035@mail-01.med.umich.edu>
2002-04-22 13:54 ` Jan-Benedict Glaw
-- strict thread matches above, loose matches on Subject: below --
2002-04-22 13:23 Nicholas Berry
2002-04-20 13:01 jordan.breeding
2002-04-21 21:12 ` kwijibo
2002-04-20 12:58 jordan.breeding
2002-04-19 23:15 Jordan Breeding
2002-04-19 23:49 ` Jan-Benedict Glaw
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020420125857.RTSP1102.rwcrmhc54.attbi.com@rwcrwbc55 \
--to=jordan.breeding@attbi.com \
--cc=jbglaw@lug-owl.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®