From: tomas szepe <kala@pinerecords.com>
To: linux-kernel@vger.kernel.org
Cc: Dennis Stosberg <dennis@stosberg.net>
Subject: Re: 2.4.19-pre7-ac2: Promise Ultra100TX2 broken
Date: Fri, 26 Apr 2002 21:42:19 +0200 [thread overview]
Message-ID: <20020426214218.A27868@louise.pinerecords.com> (raw)
> In the late 2.4.19-preX-acY the support for the Promise
> Ultra100TX2 is broken.
Apparently not for everyone. I'm using one such card with
a 20G Western Digital drive on 2.4.19-pre7-ac2 w/o any problems
apart from having to pass 'ide2=ata66' to get the driver to
allow me to use UDMA4/5 (yes, the drive *is* attached using
an 80-wire cable). The U100TX2's BIOS rev. is 2.20.0.11.
kala@liv:~$ uname -a
Linux liv 2.4.19-pre7-ac2-O1-2 #1 Tue Apr 23 19:16:09 CEST 2002 i686 unknown
kala@liv:~$ /sbin/lspci
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:04.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] (rev 01)
00:04.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:06.0 Unknown mass storage controller: Promise Technology, Inc.: Unknown device 4d68 (rev 02)
00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:0d.0 VGA compatible controller: Cirrus Logic GD 5446 (rev 45)
<snip> -- dmesg excerpt --
PDC20268: IDE controller on PCI bus 00 dev 30
PDC20268: chipset revision 2
PDC20268: not 100% native mode: will probe irqs later
PDC20268: ATA-66/100 forced bit set (WARNING)!!
ide2: BM-DMA at 0xfcd0-0xfcd7, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xfcd8-0xfcdf, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD205BA, ATA DISK drive
ide2 at 0xfcb8-0xfcbf,0xfcca on irq 9
hde: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=39770/16/63, UDMA(66)
Partition check:
hde: [PTBL] [2495/255/63] hde1 hde2 hde3 hde4
<snip> -- dmesg excerpt --
root@liv:~# hdparm -i /dev/hde
/dev/hde:
Model=WDC WD205BA, FwRev=16.13M16, SerialNo=WD-WM9491625969
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=40088160
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
AdvancedPM=no
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4
Email me should you need my '.config'.
Seeya,
Tomas
--
"hello it's not like i read my mail so that you have where to offer to sell me
a giant turnip or anything else thankyou." -tomas szepe <kala@pinerecords.com>
next reply other threads:[~2002-04-26 19:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-26 19:42 tomas szepe [this message]
2002-04-26 21:55 ` Dennis Stosberg
2002-04-27 11:02 ` tomas szepe
2002-04-27 14:22 ` Dennis Stosberg
-- strict thread matches above, loose matches on Subject: below --
2002-04-26 17:56 Dennis Stosberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020426214218.A27868@louise.pinerecords.com \
--to=kala@pinerecords.com \
--cc=dennis@stosberg.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®