Hi, when running 2.4.19-pre7 + ide-2.4.19-p7.all.convert.8.patch i get a crash on booting while detection of the onboard IDE controller. 00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 11) (prog-if 80 [Master]) Subsystem: Siemens Nixdorf AG: Unknown device 0055 Flags: bus master, medium devsel, latency 0 I/O ports at 2400 [size=16] Oops is a "Null pointer dereference at 00000040" EIP is "ide_dmaproc" + 1e Call trace "piix_dmaproc" "ide_register_subdriver" "idedisk_init" Decoded by hand. I tried with and with taskfile .. Config snippet: CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=m CONFIG_IDE_TASKFILE_IO=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_PIIX=y CONFIG_PIIX_TUNING=y CONFIG_IDEDMA_AUTO=y CONFIG_BLK_DEV_IDE_MODES=y Flo BTW: It seems linux/ide.h misses an include of linux/pci.h -- Florian Lohoff flo@rfc822.org +49-5201-669912 Heisenberg may have been here.