OOPS 2.4.19-pre7-ac4 (Was: strange things in kernel 2.4.19-pre7-ac4 + preempt patch)

["Steve Kieu" <haiquy@yahoo.com>]

[-- Attachment #1: Type: text/plain, Size: 712 bytes --]


Hi,

I did another try, after exiting X by Ctrl + Alt +
Backspace or whatever I use to exit X,  still not see
the console; I press Alt + F1 and the console appeared
as normal. No X process in running (run pstree )  ;
now I try to run X again and can X can not run, it
says : No init screen found, and something about it
can not initilize dri  (yes I compiled dri built into
the kenel, not as module). After that I got the vc ;
still run other command as normal. When I run
dmesg|less   I found an OOPS which I sent as an
attachment below.

If anything I can do to debug, pls let me know.




=====
Steve Kieu

http://messenger.yahoo.com.au - Yahoo! Messenger
- A great way to communicate long-distance for FREE!

[-- Attachment #2: oop.log --]
[-- Type: application/octet-stream, Size: 5318 bytes --]

Linux version 2.4.19-pre7-ac4 (sk@Linux) (gcc version 2.96 20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #1 Wed May 8 12:23:03 NZST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007f00000 (usable)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32512
zone(0): 4096 pages.
zone(1): 28416 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=2419pre7ac4 ro root=303 quiet
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 400.917 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 126460k/130048k available (978k kernel code, 3200k reserved, 240k data, 96k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
CPU:             Common caps: 0183fbff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 400.9176 MHz.
..... host bus clock speed is 66.8195 MHz.
cpu: 0, clocks: 668195, slice: 334097
CPU0<T0:668192,T1:334080,D:15,S:334097,C:668195>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2420] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 240 slots per queue, batch=60
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPF3102AT, ATA DISK drive
hdb: IDE/ATAPI CD-ROM 52XS, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 20015856 sectors (10248 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(33)
hdb: ATAPI 11X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda2 hda3 hda4
PPP generic driver version 2.4.2
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected an Intel i810 Chipset.
agpgart: AGP aperture is 64M @ 0xd8000000
[drm] AGP 0.99 on Intel i810 @ 0xd8000000 64MB
[drm] Initialized i810 1.1.0 20000928 on minor 63
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 96k freed
Adding Swap: 72256k swap-space (priority -1)
Adding Swap: 73720k swap-space (priority -2)
mtrr: base(0xd8000000) is not aligned on a size(0x12c000) boundary
PCI: Found IRQ 5 for device 00:1f.5
PCI: Setting latency timer of device 00:1f.5 to 64
intel8x0: clocking to 48000
Unable to handle kernel paging request at virtual address 0100001b
 printing eip:
c012b3c2
*pde = 00000000
Oops: 0000
CPU:    0
EIP:    0010:[<c012b3c2>]    Not tainted
EFLAGS: 00013246
eax: 01000000   ebx: c16e7000   ecx: c104a6f8   edx: 00000000
esi: c104a6f8   edi: c0275280   ebp: 00000000   esp: c28f9ee4
ds: 0018   es: 0018   ss: 0018
Process X (pid: 102, stackpage=c28f9000)
Stack: c16e7000 c104a6f8 c018bfb0 c104a6f8 c3c287c0 c3c29800 c018c00f c0275280 
       c16e7000 00000000 bffff968 c28f9f58 c018c4ec c0275280 c0275280 00000002 
       00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
Call Trace: [<c018bfb0>] [<c018c00f>] [<c018c4ec>] [<c018ba54>] [<c01491f7>] 
   [<c010898b>] 

Code: 0f b6 50 1b 8b 1c 95 04 a4 25 c0 89 c2 69 d2 b1 79 37 9e 8b 
 <3>X[102] exited with preempt_count 1