From: Lionel Bouton <Lionel.Bouton@inet6.fr>
To: ULISSES FURQUIM FREIRE DA SILVA <ra993482@ic.unicamp.br>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Hardware, IDE or ext3 problem?
Date: Sun, 19 May 2002 20:13:59 +0200 [thread overview]
Message-ID: <20020519201359.A17179@bouton.inet6-interne.fr> (raw)
In-Reply-To: <Pine.GSO.4.10.10205182031540.14231-100000@tigre.dcc.unicamp.br>
On Sat, May 18, 2002 at 09:08:10PM -0300, ULISSES FURQUIM FREIRE DA SILVA wrote:
>
> Hi,
>
> I installed Red Hat 7.3 and the 2.4.18-3 kernel shows some IDE
> errors on boot like:
>
> VFS: Mounted root (ext2 filesystem).
> Journalled Block Device driver loaded
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> ide0: reset: success
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
>
> I also tried the 2.4.18-4 kernel, but the errors continue. It's
> weird cause this happen only on boot and in spite of it the system runs
> fine.
> I have a SiS 5513 chipset with a QUANTUM FIREBALLlct15 20 IDE
> drive.
> I'm not sure if I have a true hardware problem or if there is a
> bug in the kernel. Any ideas?
> (please CC the answers to me)
>
> Thanks,
>
> -- Ulisses
>
What's your exact chipset ?
`lspci | grep "00:00.0"` should show it.
SiS5513 is the IDE interface device shown on the PCI bus but there are a
hell lot of revisions.
BadCRC can be due to flaky hardware but I guess incorrect timings could be
another source of the problem. The only case of incorrect timings I'm aware
of is for ATA133: SiS645DX (just began working on it).
The IDE code should lower the DMA mode by itself when it sees BadCRC, what's
the output of `hdparm -i /dev/hda` after these errors show up ?
LB.
next prev parent reply other threads:[~2002-05-19 18:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-05-19 0:08 ULISSES FURQUIM FREIRE DA SILVA
2002-05-19 18:13 ` Lionel Bouton [this message]
2002-05-19 19:03 ` ULISSES FURQUIM FREIRE DA SILVA
2002-05-19 20:11 ` Lionel Bouton
2002-05-19 21:45 ` ULISSES FURQUIM FREIRE DA SILVA
2002-05-19 22:01 ` Andre Hedrick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020519201359.A17179@bouton.inet6-interne.fr \
--to=lionel.bouton@inet6.fr \
--cc=linux-kernel@vger.kernel.org \
--cc=ra993482@ic.unicamp.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®