From: Pavel Machek <pavel@ucw.cz>
To: torvalds@transmeta.com, kernel list <linux-kernel@vger.kernel.org>
Subject: Fix suspend-to-RAM in 2.5.20
Date: Mon, 3 Jun 2002 22:11:45 +0200 [thread overview]
Message-ID: <20020603201144.GA31808@elf.ucw.cz> (raw)
Hi!
I created arch/i386/suspend.c not to clash with ACPI people so much in
future. (More stuff is going to move into it in the future, to clean
up functions that really do not belong to the headers.) Please apply,
Pavel
--- clean/arch/i386/kernel/Makefile Thu May 30 12:21:00 2002
+++ linux-swsusp/arch/i386/kernel/Makefile Mon Jun 3 19:06:05 2002
@@ -24,6 +24,8 @@
obj-$(CONFIG_SMP) += smp.o smpboot.o trampoline.o
obj-$(CONFIG_X86_LOCAL_APIC) += mpparse.o apic.o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
+obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend.o
+obj-$(CONFIG_ACPI_SLEEP) += suspend.o
ifdef CONFIG_VISWS
obj-y += setup-visws.o
obj-$(CONFIG_X86_VISWS_APIC) += visws_apic.o
--- clean/arch/i386/kernel/suspend.c Mon Jun 3 11:48:17 2002
+++ linux-swsusp/arch/i386/kernel/suspend.c Mon Jun 3 19:01:07 2002
@@ -0,0 +1,45 @@
+/*
+ * Suspend support specific for i386.
+ *
+ * Distribute under GPLv2
+ *
+ * Copyright (c) 2002 Pavel Machek <pavel@suse.cz>
+ */
+
+#define ACPI_C
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/poll.h>
+#include <linux/delay.h>
+#include <linux/sysrq.h>
+#include <linux/compatmac.h>
+#include <linux/proc_fs.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/suspend.h>
+#include <asm/uaccess.h>
+#include <asm/acpi.h>
+
+
+void do_suspend_lowlevel(int resume)
+{
+/*
+ * FIXME: This function should really be written in assembly. Actually
+ * requirement is that it does not touch stack, because %esp will be
+ * wrong during resume before restore_processor_context(). Check
+ * assembly if you modify this.
+ */
+ if (!resume) {
+ save_processor_context();
+ acpi_save_register_state((unsigned long)&&acpi_sleep_done);
+ acpi_enter_sleep_state(3);
+ return;
+ }
+acpi_sleep_done:
+ restore_processor_context();
+}
--- clean/drivers/acpi/system.c Mon Jun 3 11:43:30 2002
+++ linux-swsusp/drivers/acpi/system.c Mon Jun 3 18:57:34 2002
@@ -260,10 +260,8 @@
u32 state)
{
acpi_status status = AE_ERROR;
-#if 0
unsigned long flags = 0;
- /* this is very broken, so don't do anything until it's fixed */
save_flags(flags);
switch (state)
@@ -289,8 +287,6 @@
fix_processor_context();
restore_flags(flags);
-#endif
- printk("ACPI: ACPI-based suspend currently broken, aborting\n");
return status;
}
--- clean/include/asm-i386/suspend.h Thu May 30 12:21:13 2002
+++ linux-swsusp/include/asm-i386/suspend.h Mon Jun 3 19:15:52 2002
@@ -294,3 +294,27 @@
}
#endif
+#ifdef CONFIG_ACPI_SLEEP
+extern unsigned long saved_eip;
+extern unsigned long saved_esp;
+extern unsigned long saved_ebp;
+extern unsigned long saved_ebx;
+extern unsigned long saved_esi;
+extern unsigned long saved_edi;
+
+static inline void acpi_save_register_state(unsigned long return_point)
+{
+ saved_eip = return_point;
+ asm volatile ("movl %%esp,(%0)" : "=m" (saved_esp));
+ asm volatile ("movl %%ebp,(%0)" : "=m" (saved_ebp));
+ asm volatile ("movl %%ebx,(%0)" : "=m" (saved_ebx));
+ asm volatile ("movl %%edi,(%0)" : "=m" (saved_edi));
+ asm volatile ("movl %%esi,(%0)" : "=m" (saved_esi));
+}
+
+#define acpi_restore_register_state() do {} while (0)
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern int acpi_save_state_disk(void);
+#endif
--
(about SSSCA) "I don't say this lightly. However, I really think that the U.S.
no longer is classifiable as a democracy, but rather as a plutocracy." --hpa
next reply other threads:[~2002-06-03 20:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-06-03 20:11 Pavel Machek [this message]
2002-06-03 20:33 Grover, Andrew
2002-06-03 20:50 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020603201144.GA31808@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®