From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: torvalds@transmeta.com
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: [BKPATCH] Update 53c700 driver to version 2.8
Date: Mon, 10 Jun 2002 19:34:23 -0400 [thread overview]
Message-ID: <200206102334.g5ANYNk05623@localhost.localdomain> (raw)
The attached fixes two fatal (but fortunately rarely tripped) bugs in the
53c700 driver. One caused an endless loop when we got a request sense with a
10 byte command and was caused by having an incorrect cmd_len (actually
inherited from the request length). The fix is to copy back the saved command
length after the request sense completes. The other fix adjusts the depth
correctly in the tag starvation case (otherwise the depth is spuriously
incremented and eventually the device will accept no more commands).
James Bottomley
You can import this changeset into BK by piping this whole message to:
'| bk receive [path to repository]' or apply the patch as usual.
===================================================================
ChangeSet@1.540, 2002-06-09 15:17:35-04:00, jejb@mulgrave.(none)
[SCSI 53c700] update version to 2.8
ChangeSet@1.539, 2002-06-09 12:33:45-04:00, jejb@mulgrave.(none)
[SCSI 53c700] bux fix in tag starvation, cosmetic cleanup of set_depth
ChangeSet@1.538, 2002-03-21 14:43:41-08:00, jejb@mulgrave.(none)
53c700
Correct request sense processing to avoid command retry length
mismatch.
53c700.c | 38 +++++++++++++++++++++++++++++++-------
1 files changed, 31 insertions(+), 7 deletions(-)
diff -Nru a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
--- a/drivers/scsi/53c700.c Mon Jun 10 19:33:08 2002
+++ b/drivers/scsi/53c700.c Mon Jun 10 19:33:08 2002
@@ -51,6 +51,14 @@
/* CHANGELOG
*
+ * Version 2.8
+ *
+ * Fixed bad bug affecting tag starvation processing (previously the
+ * driver would hang the system if too many tags starved. Also fixed
+ * bad bug having to do with 10 byte command processing and REQUEST
+ * SENSE (the command would loop forever getting a transfer length
+ * mismatch in the CMD phase).
+ *
* Version 2.7
*
* Fixed scripts problem which caused certain devices (notably CDRWs)
@@ -104,7 +112,7 @@
* Initial modularisation from the D700. See NCR_D700.c for the rest of
* the changelog.
* */
-#define NCR_700_VERSION "2.7"
+#define NCR_700_VERSION "2.8"
#include <linux/config.h>
#include <linux/version.h>
@@ -674,21 +682,34 @@
print_sense("53c700", SCp);
#endif
- SCp->use_sg = SCp->cmnd[8];
+ /* restore the old result if the request sense was
+ * successful */
if(result == 0)
result = SCp->cmnd[7];
+ /* now restore the original command */
+ memcpy((void *) SCp->cmnd, (void *) SCp->data_cmnd,
+ sizeof(SCp->data_cmnd));
+ SCp->request_buffer = SCp->buffer;
+ SCp->request_bufflen = SCp->bufflen;
+ SCp->use_sg = SCp->old_use_sg;
+ SCp->cmd_len = SCp->old_cmd_len;
+ SCp->sc_data_direction = SCp->sc_old_data_direction;
+ SCp->underflow = SCp->old_underflow;
+
}
free_slot(slot, hostdata);
-
- SCp->host_scribble = NULL;
- SCp->result = result;
- SCp->scsi_done(SCp);
+#ifdef NCR_700_DEBUG
if(NCR_700_get_depth(SCp->device) == 0 ||
NCR_700_get_depth(SCp->device) > NCR_700_MAX_TAGS)
printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n",
NCR_700_get_depth(SCp->device));
+#endif /* NCR_700_DEBUG */
NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) - 1);
+
+ SCp->host_scribble = NULL;
+ SCp->result = result;
+ SCp->scsi_done(SCp);
} else {
printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n");
}
@@ -1048,7 +1069,6 @@
* of the command */
SCp->cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC;
SCp->cmnd[7] = hostdata->status[0];
- SCp->cmnd[8] = SCp->use_sg;
SCp->use_sg = 0;
SCp->sc_data_direction = SCSI_DATA_READ;
pci_dma_sync_single(hostdata->pci_dev,
@@ -1885,6 +1905,10 @@
printk(KERN_WARNING "scsi%d (%d:%d) Target is suffering from tag
starvation.\n", SCp->host->host_no, SCp->target, SCp->lun);
NCR_700_set_flag(SCp->device, NCR_700_DEV_TAG_STARVATION_WARNED);
}
+ /* Release the slot and ajust the depth before refusing
+ * the command */
+ free_slot(slot, hostdata);
+ NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) - 1);
return 1;
}
slot->tag = SCp->device->current_tag++;
===================================================================
This BitKeeper patch contains the following changesets:
1.538..1.540
## Wrapped with gzip_uu ##
begin 664 bkpatch5608
M'XL(`#0W!3T``]U847/:1A!^MG[%3OQ0<`W<20(),F228)IZDC@IU'EI.\PA
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MH<&LE_#OGF)@!5`Z%[_@>Z"R3`8&,OE[+K4!+5,M89FI0&H=IS/<'L1*Q2'@
M;@N1ABAILC4D,IV9.2I8Q'I!8#2MUX"G=7WK_3T*5N,K7Y;%!+.>P9)4'C]Q
MF,44"2T=Z+B*DV:P.[W-N,?]#;-YFV\\Z?J.'X2!L.VNX-Y11Y]2Z-C<MEW.
MNINVZ[N>91U5\!#]8I'C\DWICQ+];H%^I\6ZP.V>@^BW&\S]#]#_93P87U<Q
M\!M,\\\0Q9\A3L&(&6@C<#\3J_02`:>-X@""1(HT7X**,#S,))1+1+Y$V_N6
MT.ZP+N\XCNMLF,=\_O?0WBYJ;TI_%&B[;`_M=H][/>=_@7:^#(61125%B"FW
M[:9?0=G]UJ#LDG<V3MMVW((;CHH33SR.S<>CYY1"CI^VP]R-C03B%)'D'7(&
M[['N:<ZPH6$_2B"]2(S,3M)$AA,JDZ"R>!:G(MDR!B[&;\M$&IFLF["E'`T"
MJ\\,[N82%YFY1"H)(1%KW$8%@:`(%4FR+@E'HY9G'9BN,7PKO1KN8C.'8!%.
MD(WZ'1#1%R82*Y6E^QTTLKOBC<'Z_G@P_(.HO^IX'G#KFAZV=79VUKK8.8+.
MI!)B3)TG!N*H&#ETX9W0M`HN0.<!.3/*$[AHD4(L':S2F*J[0ZT/7$PK4'(A
M%\%R7:L5?'U1A_%@V7@6+-+P$@['L`J(23%1;%Z^=/R'5%'M4*!>?THBQ6!E
M^62:1Q$ZNE_J*G\=ET)<]L7PY[U<KN5$S[;3Z*=).7(O42&[+U(-W<OH8%+8
M&L844U34*FF<H`6'DWN[IZ',H@3]NF_`=K"0LZXX)@;\%0]\1=M`F>Q_P?_.
M:49@T'`?)9,IZ8CR#_D>M(+80*BD3K\S0'J+4--K;>0":M,U1)F4F.NHHIA(
ME(&R(0SS(*[$0[F*`WI@CP!3&5'$8@+G64H2O%YVG6_5:BLCPH^Y-@N9&NI!
MR)F3$#V`38?"RP/5%=IV4NQ6V[8DJ`)/4*?L+ICZT9*[ZX*+N=BE'#^/HU!&
M<#,835#AY&KX\O:5=>TQ"I%SF8:8WYBJ!]-%)GO,1B6_6E7DS?$:--%!%D^G
MB<3HN[E]\^:IM4N>HE3TJYJQ&]_YA=(34_*:^VB36Y6'D<0.3<M#6`3YM<+D
M`(PHIXI=51V:/RPB.W?7Z.,2R%[*HK(0;(^W:P2K>E'`?KD[_>S8=!T:&`%/
MOSZ?'C9FE$_=+SHL=C*?NM#@CY).1WNJ$H$0;TV%1BSNZ.)LC?%:]B./%+#7
M;0=\"V']4%E#[1U<T,@/\6<9PE2$1?X+K-E8$2EI#ZO`'J77EAG"IG*-'(QA
M0DI*.^%.Y4AK#TL$\9M2@*&T)JVZ5"M#I/P7"5:7B"P@+5LCYF)5M0ZA*KD<
MB]X^P^];0S]'PY]NA^.?2<=X>#,>0FT_?$NK$J660)%.AF(8%H<44.!,K%5=
M7%'%]N9:W'U0S^#M%2SGF$=85]!G6/T+9B\?YYCZ,9:E;8!_&([&U^]NX`EZ
<^,G]_RB"N0P^(=A]X;-NU&G;UI^G:50R!1$`````
`
end
reply other threads:[~2002-06-10 23:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200206102334.g5ANYNk05623@localhost.localdomain \
--to=james.bottomley@hansenpartnership.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®