On Sun, Jun 30, 2002 at 12:57:41PM -0700, Ben Greear wrote:
> Anders Karlsson wrote:
[snip: PCI problems with Shuttle SS40 + kernel 2.4.18]
> 
> I don't know the exact problem, but if you add: pci=bios to
> the kernel boot comand line args, then it seems to work fine,
> at least with RH 7.3.
> 
> I'm also running a rc1 kernel w/out problems on it.
> 
> Ben

Ben,

That indeed solved the problem. It has been suggested to me that the
chipset on the FS40 motherboard (used in the SS40) is not yet properly
recognized and handled by the kernel and so going through the bios
instead will work.

Many thanks as your suggestion did solve the problem. Hopefully we
will soon see a kernel that will be able to use the PCI bus in raw
mode on the FS40 motherboard. :-)

Cheers!

-- 
Anders Karlsson <anders dot karlsson at meansolutions dot com>