From: "Steve Kieu" <haiquy@yahoo.com>
To: kernel <linux-kernel@vger.kernel.org>
Subject: Re: Status of DRI modules for i810 with > 2.4.19-pre6
Date: Mon, 15 Jul 2002 08:09:22 +1000 (EST) [thread overview]
Message-ID: <20020714220922.61652.qmail@web10404.mail.yahoo.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 200 bytes --]
No, it is not fixed yet! I attched the dmesg.log but
if required I will make the result through ksymoop.
Regards,
=====
Steve Kieu
http://www.sold.com.au - SOLD.com.au
- Find yourself a bargain!
[-- Attachment #2: dmesg.log --]
[-- Type: application/octet-stream, Size: 4895 bytes --]
Linux version 2.4.19-rc1-ac3 (sk@Linux) (gcc version 2.96 20000731 (Mandrake Linux 8.1 2.96-0.63.1mdk)) #1 Mon Jul 15 09:34:56 UTC 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007f00000 (usable)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32512
zone(0): 4096 pages.
zone(1): 28416 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=2419rc1ac3 ro root=303
Initializing CPU#0
Detected 400.917 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 126548k/130048k available (962k kernel code, 3112k reserved, 204k data, 80k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 2048 (order: 2, 16384 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=15818 max_file_pages=0 max_inodes=0 max_dentries=15818
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2420] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 240 slots per queue, batch=60
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: FUJITSU MPF3102AT, ATA DISK drive
hdb: IDE/ATAPI CD-ROM 52XS, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 20015856 sectors (10248 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(33)
Partition check:
hda: hda1 hda2 hda3 hda4
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected an Intel i810 Chipset.
agpgart: AGP aperture is 64M @ 0xd8000000
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 80k freed
Adding Swap: 72256k swap-space (priority -1)
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
Adding Swap: 61432k swap-space (priority -2)
[drm] AGP 0.99 on Intel i810 @ 0xd8000000 64MB
[drm] Initialized i810 1.1.0 20000928 on minor 63
mtrr: base(0xd8000000) is not aligned on a size(0x12c000) boundary
Unable to handle kernel paging request at virtual address 0100001b
printing eip:
c01292f2
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01292f2>] Not tainted
EFLAGS: 00013246
eax: 01000000 ebx: c5475000 ecx: c11127d0 edx: 00000000
esi: c11127d0 edi: c88c7260 ebp: 00000000 esp: c6719ee4
ds: 0018 es: 0018 ss: 0018
Process X (pid: 111, stackpage=c6719000)
Stack: c5475000 c11127d0 c88c1390 c11127d0 c5c032c0 c7b45800 c88c13ef c88c7260
c5475000 00000000 bffff978 c6719f58 c88c18cc c88c7260 c88c7260 00000002
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace: [<c88c1390>] [<c88c13ef>] [<c88c7260>] [<c88c18cc>] [<c88c7260>]
[<c88c7260>] [<c88c7260>] [<c88c0e34>] [<c0147487>] [<c010896b>]
Code: 0f b6 50 1b 8b 1c 95 48 4e 24 c0 89 c2 69 d2 01 00 37 9e 8b
<3>X[111] exited with preempt_count 1
next reply other threads:[~2002-07-14 22:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-14 22:09 Steve Kieu [this message]
2002-07-15 0:41 ` Alan Cox
2002-07-15 6:57 ` Steve Kieu
2002-07-15 13:28 ` Alan Cox
2002-07-15 11:11 ` Steve Kieu
-- strict thread matches above, loose matches on Subject: below --
2002-07-13 21:02 Steve Kieu
2002-07-14 1:45 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020714220922.61652.qmail@web10404.mail.yahoo.com \
--to=haiquy@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®