From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 18 Jul 2002 18:54:16 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 18 Jul 2002 18:54:16 -0400 Received: from nextgeneration.speedroad.net ([195.139.232.50]:29579 "HELO nextgeneration.speedroad.net") by vger.kernel.org with SMTP id ; Thu, 18 Jul 2002 18:54:15 -0400 Message-ID: <20020718225716.491.qmail@nextgeneration.speedroad.net> From: "Arnvid Karstad" To: "Linux Kernel Mailing List" Subject: kernel 2.4.18-rc1-ac6 - dmesg errors?! Date: Fri, 19 Jul 2002 00:57:16 +0200 Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hiya, Upgrade my laptop to use 2.4.18-rc1-ac6, and I noticed it had support for more of my hardware. But it seems it also get's these "errors" in dmesg... 1) Prism2 - used to use the Wlan-NG drivers but since the rc/ac kernel has this included I decided to test it orinoco.c 0.11b (David Gibson and others) PCI: Found IRQ 9 for device 02:02.0 PCI: Sharing IRQ 9 with 00:1d.2 PCI: Sharing IRQ 9 with 00:1f.1 Detected Orinoco/Prism2 PCI device at 02:02.0, mem:0xEC000000 to 0xEC000FFF -> 0xe978e000, irq:9 Reset done........................................................................ ............................................................ ............................................................................ ...................................; Clear Reset pci_cor : reg = 0x0 - 8F4B - 8F19 eth1: Station identity 001f:0006:0001:0003 eth1: Looks like an Intersil firmware version 1.03 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:20:E0:8A:FC:BE eth1: Station name "Prism I" eth1: ready I'm getting this message every now and then.. Jul 19 00:50:04 mgr kernel: eth1: Undersized frame received (19 bytes) Jul 19 00:51:05 mgr last message repeated 2 times Jul 19 00:51:26 mgr kernel: eth1: Undersized frame received (12 bytes) Jul 19 00:51:36 mgr kernel: eth1: Undersized frame received (19 bytes) The connection works, but these packages are a bit strange even tho ;) The AP is an AiroNet AP 3400. 2) 2.4.18+* works great in console mode. but when ever I get into X my logs get filled with : mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available mtrr: no more MTRRs available Is there any way to battle this? On the brighter side of life.. 2.4.18-rc1-ac6 seems to be recognizing my hardware better than the 2.4.18-vanilla kernel. Now my cpu is detected correctly instead of being a 733MHZ.. Best regards Arnvid