From: Vojtech Pavlik <vojtech@suse.cz>
To: torvalds@transmeta.com, linux-kernel@vger.kernel.org,
linuxconsole-dev@lists.sourceforge.net
Subject: [cset] Move ps2serkbd.c functionality into atkbd.c, kill ps2serkbd.c
Date: Thu, 25 Jul 2002 14:25:59 +0200 [thread overview]
Message-ID: <20020725142559.C14561@ucw.cz> (raw)
In-Reply-To: <20020725140342.B14561@ucw.cz>; from vojtech@suse.cz on Thu, Jul 25, 2002 at 02:03:42PM +0200
On Thu, Jul 25, 2002 at 02:03:42PM +0200, Vojtech Pavlik wrote:
Hi!
You can import this changeset into BK by piping this whole message to:
'| bk receive [path to repository]' or apply the patch as usual.
'bk pull http://linux-input.bkbits.net:8080/linux-input' should also
work.
===================================================================
ChangeSet@1.446, 2002-07-25 14:23:58+02:00, vojtech@twilight.ucw.cz
Add support for AT keyboards connected over a PS/2 to Serial
converter to atkbd.c - trivial. Remove ps2serkbd, because it's
not needed anymore.
b/drivers/input/keyboard/Config.help | 12 -
b/drivers/input/keyboard/Config.in | 1
b/drivers/input/keyboard/Makefile | 1
b/drivers/input/keyboard/atkbd.c | 19 +-
drivers/input/keyboard/ps2serkbd.c | 299 -----------------------------------
5 files changed, 14 insertions(+), 318 deletions(-)
diff -Nru a/drivers/input/keyboard/Config.help b/drivers/input/keyboard/Config.help
--- a/drivers/input/keyboard/Config.help Thu Jul 25 14:24:31 2002
+++ b/drivers/input/keyboard/Config.help Thu Jul 25 14:24:31 2002
@@ -7,7 +7,8 @@
CONFIG_KEYBOARD_ATKBD
Say Y here if you want to use the standard AT keyboard. Usually
you'll need this, unless you have a different type keyboard (USB,
- ADB or other).
+ ADB or other). This also works for AT keyboards connected over
+ a PS/2 to serial converter.
If unsure, say Y.
@@ -24,15 +25,6 @@
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called sunkbd.o. If you want to compile it as a
- module, say M here and read <file:Documentation/modules.txt>.
-
-CONFIG_KEYBOARD_PS2SERKBD
- Say Y here if you want to use a PS/2 to Serial converter with a
- keyboard attached to it.
-
- This driver is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called ps2serkbd.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_KEYBOARD_XTKBD
diff -Nru a/drivers/input/keyboard/Config.in b/drivers/input/keyboard/Config.in
--- a/drivers/input/keyboard/Config.in Thu Jul 25 14:24:31 2002
+++ b/drivers/input/keyboard/Config.in Thu Jul 25 14:24:31 2002
@@ -6,7 +6,6 @@
dep_tristate ' AT keyboard support' CONFIG_KEYBOARD_ATKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
dep_tristate ' Sun Type 4 and Type 5 keyboard support' CONFIG_KEYBOARD_SUNKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
-dep_tristate ' PS/2 to Serial converter support' CONFIG_KEYBOARD_PS2SERKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
dep_tristate ' XT Keyboard support' CONFIG_KEYBOARD_XTKBD $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
dep_tristate ' Newton keyboard' CONFIG_KEYBOARD_NEWTON $CONFIG_INPUT $CONFIG_INPUT_KEYBOARD $CONFIG_SERIO
diff -Nru a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
--- a/drivers/input/keyboard/Makefile Thu Jul 25 14:24:31 2002
+++ b/drivers/input/keyboard/Makefile Thu Jul 25 14:24:31 2002
@@ -6,7 +6,6 @@
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
-obj-$(CONFIG_KEYBOARD_PS2SERKBD) += ps2serkbd.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
diff -Nru a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
--- a/drivers/input/keyboard/atkbd.c Thu Jul 25 14:24:31 2002
+++ b/drivers/input/keyboard/atkbd.c Thu Jul 25 14:24:31 2002
@@ -129,6 +129,7 @@
signed char ack;
unsigned char emul;
unsigned short id;
+ unsigned char write;
};
/*
@@ -146,7 +147,7 @@
#endif
/* Interface error. Request that the keyboard resend. */
- if (flags & (SERIO_FRAME | SERIO_PARITY)) {
+ if ((flags & (SERIO_FRAME | SERIO_PARITY)) && atkbd->write) {
printk("atkbd.c: frame/parity error: %02x\n", flags);
serio_write(serio, ATKBD_CMD_RESEND);
return;
@@ -265,7 +266,7 @@
struct atkbd *atkbd = dev->private;
char param[2];
- if (!atkbd->serio->write)
+ if (!atkbd->write)
return -1;
switch (type) {
@@ -449,15 +450,19 @@
struct atkbd *atkbd;
int i;
- if ((serio->type & SERIO_TYPE) != SERIO_8042)
- return;
+ if ((serio->type & SERIO_TYPE) != SERIO_8042 &&
+ (((serio->type & SERIO_TYPE) != SERIO_RS232) || (serio->type & SERIO_PROTO) != SERIO_PS2SER))
+ return;
if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL)))
return;
memset(atkbd, 0, sizeof(struct atkbd));
- if (serio->write) {
+ if ((serio->type & SERIO_TYPE) == SERIO_8042 && serio->write)
+ atkbd->write = 1;
+
+ if (atkbd->write) {
atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
} else atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
@@ -475,7 +480,7 @@
return;
}
- if (serio->write) {
+ if (atkbd->write) {
if (atkbd_probe(atkbd)) {
serio_close(serio);
@@ -518,7 +523,7 @@
printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys);
- if (serio->write)
+ if (atkbd->write)
atkbd_initialize(atkbd);
}
diff -Nru a/drivers/input/keyboard/ps2serkbd.c b/drivers/input/keyboard/ps2serkbd.c
--- a/drivers/input/keyboard/ps2serkbd.c Thu Jul 25 14:24:31 2002
+++ /dev/null Wed Dec 31 16:00:00 1969
@@ -1,299 +0,0 @@
-/*
- * based on: sunkbd.c and ps2serkbd.c
- *
- * $Id: ps2serkbd.c,v 1.5 2001/09/25 10:12:07 vojtech Exp $
- */
-
-/*
- * PS/2 keyboard via adapter at serial port driver for Linux
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/serio.h>
-#include <linux/tqueue.h>
-
-#define ATKBD_CMD_SETLEDS 0x10ed
-#define ATKBD_CMD_GSCANSET 0x11f0
-#define ATKBD_CMD_SSCANSET 0x10f0
-#define ATKBD_CMD_GETID 0x02f2
-#define ATKBD_CMD_ENABLE 0x00f4
-#define ATKBD_CMD_RESET_DIS 0x00f5
-#define ATKBD_CMD_SETALL_MB 0x00f8
-#define ATKBD_CMD_EX_ENABLE 0x10ea
-#define ATKBD_CMD_EX_SETLEDS 0x20eb
-
-#define ATKBD_RET_ACK 0xfa
-#define ATKBD_RET_NAK 0xfe
-
-#define ATKBD_KEY_UNKNOWN 0
-#define ATKBD_KEY_BAT 251
-#define ATKBD_KEY_EMUL0 252
-#define ATKBD_KEY_EMUL1 253
-#define ATKBD_KEY_RELEASE 254
-#define ATKBD_KEY_NULL 255
-
-static unsigned char ps2serkbd_set2_keycode[512] = {
- 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41, 85,
- 0, 56, 42, 0, 29, 16, 2, 89, 0, 0, 44, 31, 30, 17, 3, 90,
- 0, 46, 45, 32, 18, 5, 4, 91, 0, 57, 47, 33, 20, 19, 6, 0,
- 0, 49, 48, 35, 34, 21, 7, 0, 0, 0, 50, 36, 22, 8, 9, 0,
- 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0,
- 122, 89, 40,120, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 0,
- 85, 86, 90, 91, 92, 93, 14, 94, 95, 79, 0, 75, 71,121, 0,123,
- 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
- 252, 0, 0, 65, 99, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,251, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 252,253, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 254, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,
- 0, 0, 92, 90, 85, 0,137, 0, 0, 0, 0, 91, 89,144,115, 0,
- 136,100,255, 0, 97,149,164, 0,156, 0, 0,140,115, 0, 0,125,
- 0,150, 0,154,152,163,151,126,112,166, 0,140, 0,147, 0,127,
- 159,167,139,160,163, 0, 0,116,158, 0,150,165, 0, 0, 0,142,
- 157, 0,114,166,168, 0, 0, 0,155, 0, 98,113, 0,148, 0,138,
- 0, 0, 0, 0, 0, 0,153,140, 0, 0, 96, 0, 0, 0,143, 0,
- 133, 0,116, 0,143, 0,174,133, 0,107, 0,105,102, 0, 0,112,
- 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119
-};
-
-/*
- * Per-keyboard data.
- */
-
-struct ps2serkbd {
- unsigned char keycode[512];
- struct input_dev dev;
- struct serio *serio;
- char name[64];
- char phys[32];
- struct tq_struct tq;
- unsigned char cmdbuf[4];
- unsigned char cmdcnt;
- unsigned char set;
- char release;
- char ack;
- char emul;
- char error;
- unsigned short id;
-};
-
-/*
- * ps2serkbd_interrupt() is called by the low level driver when a character
- * is received.
- */
-
-static void ps2serkbd_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
-{
- static int event_count=0;
- struct ps2serkbd* ps2serkbd = serio->private;
- int code=data;
-
-#if 0
- printk(KERN_WARNING "ps2serkbd.c(%8d): (scancode %#x)\n", event_count, data);
-#endif
- event_count++;
-
- switch (code) {
- case ATKBD_RET_ACK:
- ps2serkbd->ack = 1;
- return;
- case ATKBD_RET_NAK:
- ps2serkbd->ack = -1;
- return;
- }
-
- if (ps2serkbd->cmdcnt) {
- ps2serkbd->cmdbuf[--ps2serkbd->cmdcnt] = code;
- return;
- }
-
- switch (ps2serkbd->keycode[code]) {
- case ATKBD_KEY_BAT:
- queue_task(&ps2serkbd->tq, &tq_immediate);
- mark_bh(IMMEDIATE_BH);
- return;
- case ATKBD_KEY_EMUL0:
- ps2serkbd->emul = 1;
- return;
- case ATKBD_KEY_EMUL1:
- ps2serkbd->emul = 2;
- return;
- case ATKBD_KEY_RELEASE:
- ps2serkbd->release = 1;
- return;
- }
-
- if (ps2serkbd->emul) {
- if (--ps2serkbd->emul) return;
- code |= 0x100;
- }
-
- switch (ps2serkbd->keycode[code]) {
- case ATKBD_KEY_NULL:
- break;
- case ATKBD_KEY_UNKNOWN:
- printk(KERN_WARNING "ps2serkbd.c: Unknown key (set %d, scancode %#x) %s.\n",
- ps2serkbd->set, code, ps2serkbd->release ? "released" : "pressed");
- break;
- default:
- input_report_key(&ps2serkbd->dev, ps2serkbd->keycode[code], !ps2serkbd->release);
- input_sync(&ps2serkbd->dev);
- }
-
- ps2serkbd->release = 0;
-}
-
-/*
- * ps2serkbd_event() handles events from the input module.
- */
-
-static int ps2serkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
- switch (type) {
-
- case EV_LED:
-
- return 0;
- }
-
- return -1;
-}
-
-static int ps2serkbd_initialize(struct ps2serkbd *ps2serkbd)
-{
- return 0;
-}
-
-static void ps2serkbd_reinit(void *data)
-{
-}
-
-
-static void ps2serkbd_connect(struct serio *serio, struct serio_dev *dev)
-{
- struct ps2serkbd *ps2serkbd;
- int i;
-
- if ((serio->type & SERIO_TYPE) != SERIO_RS232)
- return;
-
- if ((serio->type & SERIO_PROTO) && (serio->type & SERIO_PROTO) != SERIO_PS2SER)
- return;
-
-
- if (!(ps2serkbd = kmalloc(sizeof(struct ps2serkbd), GFP_KERNEL)))
- return;
-
- memset(ps2serkbd, 0, sizeof(struct ps2serkbd));
-
- ps2serkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_LED) | BIT(EV_REP);
- ps2serkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
-
- ps2serkbd->serio = serio;
-
- ps2serkbd->dev.keycode = ps2serkbd->keycode;
- ps2serkbd->dev.event = ps2serkbd_event;
- ps2serkbd->dev.private = ps2serkbd;
-
- ps2serkbd->tq.routine = ps2serkbd_reinit;
- ps2serkbd->tq.data = ps2serkbd;
-
- serio->private = ps2serkbd;
-
- if (serio_open(serio, dev)) {
- kfree(ps2serkbd);
- return;
- }
-
- if (ps2serkbd_initialize(ps2serkbd) < 0) {
- serio_close(serio);
- kfree(ps2serkbd);
- return;
- }
-
- ps2serkbd->set = 4;
-
- if (ps2serkbd->set == 4) {
- ps2serkbd->dev.ledbit[0] |= 0;
- sprintf(ps2serkbd->name, "AT Set 2 Extended keyboard\n");
- }
- memcpy(ps2serkbd->keycode, ps2serkbd_set2_keycode, sizeof(ps2serkbd->keycode));
-
- sprintf(ps2serkbd->phys, "%s/input0", serio->phys);
-
- ps2serkbd->dev.name = ps2serkbd->name;
- ps2serkbd->dev.phys = ps2serkbd->phys;
- ps2serkbd->dev.id.bustype = BUS_RS232;
- ps2serkbd->dev.id.vendor = SERIO_PS2SER;
- ps2serkbd->dev.id.product = ps2serkbd->set;
- ps2serkbd->dev.id.version = ps2serkbd->id;
-
- for (i = 0; i < 512; i++)
- if (ps2serkbd->keycode[i] && ps2serkbd->keycode[i] <= 250)
- set_bit(ps2serkbd->keycode[i], ps2serkbd->dev.keybit);
-
- input_register_device(&ps2serkbd->dev);
-}
-
-/*
- * ps2serkbd_disconnect() unregisters and closes behind us.
- */
-
-static void ps2serkbd_disconnect(struct serio *serio)
-{
- struct ps2serkbd *ps2serkbd = serio->private;
- input_unregister_device(&ps2serkbd->dev);
- serio_close(serio);
- kfree(ps2serkbd);
-}
-
-static struct serio_dev ps2serkbd_dev = {
-interrupt:
- ps2serkbd_interrupt,
-connect:
- ps2serkbd_connect,
-disconnect:
- ps2serkbd_disconnect
-};
-
-/*
- * The functions for insering/removing us as a module.
- */
-
-int __init ps2serkbd_init(void)
-{
- serio_register_device(&ps2serkbd_dev);
- return 0;
-}
-
-void __exit ps2serkbd_exit(void)
-{
- serio_unregister_device(&ps2serkbd_dev);
-}
-
-module_init(ps2serkbd_init);
-module_exit(ps2serkbd_exit);
===================================================================
This BitKeeper patch contains the following changesets:
+
## Wrapped with gzip_uu ##
begin 664 bkpatch20801
M'XL(`/_M/ST``\U8;6_B1A#^C'_%G$Y*@ZZ8?;?-B>BXD+;H>@J"W(>3*E6+
MO007L)%M$J6U^ML[M@GA2-+PTIQ*HJRQAV=F9YY]9LA;^)*:I%6[B?_(C#^Q
MWL(O<9JU:MEM.`NO)YF]]&]M_T^\/XACO-^<Q'/37%DW1]-F&"V6F87/^SKS
M)W!CDK15HS9?W\GN%J95&US\_.77SL"RVFTXG^CHV@Q-!NVVE<7)C9X%Z0>=
M369Q9&>)CM*YR;3MQ_-\;9HS0AC^2.IP(E5.%1%.[M.`4BVH"0@3KA+6*K`/
M6^%OXSA,T@*-Y;@*S^H"M8500%B3.$TF@8H6XRWIOB.L10@\`POO)#2(]1'^
MVTV<6SYT@@#2Y6(1)QF,XP0Z5S`U=Z-8)T$*?AQ%QL],`#'F&S3TATV&0<#0
M)*&>X<?1`I]D^!#OZFPZ"FP?&I`EX0T:V#`P<_PH+%*&U<>G/\+(^'J9&@BS
M'U($B.(,(F,"]*&CNWF<&-OZ!))QAUG]API:C3U?ED4TL<Z>RV@>8(1(H8I6
MS?LM-U=;6%6/<,J)*TA./9?2?#0*/,.("2A7GL./PRZ8P;B4B"V5MW^DYW$T
M#J_M,-J.52K'D[FG#>$&$SNF2HT]YUCX=;B*>](Y.-R)F2VV`Q8.7N74=3!2
MYHT-,2(0\G@'ZY"%\@C?/^3/>FK&X<QLQTN(0T7N&5?[RC7:%=)%0AR)O@Z6
M%V=V_V#7)VR;O#0G@A*5&S8RRA6^UAYC@@?/.O@89I^,69BD&9B9P</?M/&B
ML>'@[VVLC3U0=)H+IB0M)?CE8A7:_-I<.MX!Y:CC`G6<N)P[I8[S1RHN7U)Q
M!@WZ.C*^K;.HH17K+Z&1W):_J(G]'>IQ@-)V*0%J]?`OLP`ZW8^`C23.)B:I
MVW`U"5/0LS2&VSB9IB\U&01X:#-IV68>FHQM=9D#W@[,"J/#>;6KI!X+O\$I
MX?)#.4604]^+4I7V[T6I,#J$4![\JWS<:^<!-=Y/U(]$7U>82_1237__XPH7
MDU?5?G8K\?UN7Z'"]Z/D_@7>9X([#AO;'96*B9QPI51974KW+R_%KN!\_]F^
MG.B_G><?A#8MJ%`-IKM18969`YC0PT."7*@MHS2\CK`+^!.=P&T29N8]=A;A
ME:VE7&KA&$Y/QS-]G<()G`XO!KW+WW\:=#Y?0`[5NWYGT+OZ6J_#R4GU=:1Q
M5D+5X2_L'<HMP*JE!'OSC8W5%9)A#^L)R8&OW!4]*&Z<%=\NT6GEY>IK_Z(.
M;]JKMRX1#!U:M=KI3O:#(>.L#GD.3UKW!Y=7EQOF_2'#BWH=\6'U2DRV3"+,
MCU!EZRT6\6+`[:V`866ZVGVMMID-:`-];_U6@3Y*I7#*5%;+TR:2%77M5<MC
MD_+T'S!K'B`)>\_&QSM8:X-"^9=/*#^E+4YV4/[7&1>[9;9;SYWFC?T4@V0Y
DS6_IP`&5.T`<UO_<\2?&GZ;+>5N;0+ET+*U_``B&%^]1$@``
`
end
--
Vojtech Pavlik
SuSE Labs
next prev parent reply other threads:[~2002-07-25 12:22 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20020725083716.A20717@ucw.cz>
2002-07-25 12:00 ` [cset] Add a input_sync() a method to tell which events belong together Vojtech Pavlik
2002-07-25 12:03 ` Vojtech Pavlik
2002-07-25 12:25 ` Vojtech Pavlik [this message]
2002-07-25 14:11 ` [cset] Fix mouse wheel direction in psmouse.c Vojtech Pavlik
2002-07-25 14:38 ` [cset] Add the EVIOCSABS ioctl for X people Vojtech Pavlik
2002-07-25 14:47 ` Brad Hards
2002-07-25 15:08 ` Vojtech Pavlik
2002-07-28 7:32 ` Brad Hards
2002-07-28 8:08 ` Vojtech Pavlik
2002-07-28 8:29 ` Brad Hards
2002-07-28 8:39 ` Vojtech Pavlik
2002-07-28 8:51 ` Russell King
2002-07-28 9:12 ` Brad Hards
2002-07-25 15:12 ` Larry McVoy
2002-07-25 15:23 ` Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020725142559.C14561@ucw.cz \
--to=vojtech@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxconsole-dev@lists.sourceforge.net \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®