From: Andris Pavenis <pavenis@latnet.lv>
To: tmus@get2net.dk
Cc: linux-kernel@vger.kernel.org
Subject: Re: i810 sound broken...
Date: Tue, 6 Aug 2002 10:24:49 +0300 [thread overview]
Message-ID: <200208061024.49286.pavenis@latnet.lv> (raw)
i810_audio works for me with 2.4.19-ac3 without problems (kernel was built
with gcc-3.1). Also no problems with loading i810 modules. I still had trouble
with modules before I upgraded modutils from 2.4.16 to 2.4.19
Only had to build lm_sensors with old gcc-2.95.3 otherwise their modules
load about 2 minutes (but still works after that)
Andris
bash-2.05a# uname -a
Linux hal 2.4.19-ac3 #2 Mon Aug 5 11:17:44 EEST 2002 i686 unknown
bash-2.05a# dmesg | sed 1q
Linux version 2.4.19-ac3 (root@hal) (gcc version 3.1) #2 Mon Aug 5 11:17:44 EEST 2002
bash-2.05a# lsmod
Module Size Used by Not tainted
w83781d 19224 0 (unused)
i2c-i801 4340 0 (unused)
i2c-i810 2348 0 (unused)
i810_audio 22600 1
ac97_codec 10920 0 [i810_audio]
nls_iso8859-1 2844 2 (autoclean)
nls_cp437 4348 2 (autoclean)
bash-2.05a# lspci -v
00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 801f
Flags: bus master, fast devsel, latency 0
00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 801f
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 11
Memory at e4000000 (32-bit, prefetchable) [size=64M]
Memory at e3800000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [dc] Power Management version 1
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e3000000-e37fffff
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corp. 82801AA IDE
Flags: bus master, medium devsel, latency 0
[virtual] I/O ports at 01f0
[virtual] I/O ports at 03f4
[virtual] I/O ports at 0170
[virtual] I/O ports at 0374
I/O ports at b800 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp. 82801AA USB
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at b400 [size=32]
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
Subsystem: Intel Corp. 82801AA SMBus
Flags: medium devsel, IRQ 5
I/O ports at e800 [size=16]
00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
Subsystem: Analog Devices: Unknown device 1043
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at e000 [size=256]
I/O ports at e100 [size=64]
01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at d800 [size=256]
Memory at e3000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
next reply other threads:[~2002-08-06 7:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-06 7:24 Andris Pavenis [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-08-08 8:37 Thomas Munck Steenholdt
2002-08-05 11:27 Thomas Munck Steenholdt
2002-08-05 12:54 ` Alan Cox
2002-08-05 13:47 ` venom
2002-08-05 15:28 ` Alan Cox
2002-08-05 18:38 ` Thomas Munck Steenholdt
2002-08-06 0:26 ` Jeff Chua
2002-08-07 15:05 ` Doug Ledford
2002-08-07 18:49 ` Juergen Sawinski
2002-08-08 20:47 ` Doug Ledford
2002-08-05 21:38 ` Alexander Hoogerhuis
2002-08-06 14:47 ` Alan Cox
2002-08-06 13:31 ` Alexander Hoogerhuis
2002-08-05 20:21 ` Juergen Sawinski
2002-08-05 21:44 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200208061024.49286.pavenis@latnet.lv \
--to=pavenis@latnet.lv \
--cc=linux-kernel@vger.kernel.org \
--cc=tmus@get2net.dk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®