Linux version 2.4.19 (tabris@tabriel.tabris.net) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #2 Wed Aug 28 13:52:55 EDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. found SMP MP-table at 000f55b0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. Advanced speculative caching feature present On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 Kernel command line: root=/dev/hda3 vga=8 Initializing CPU#0 Detected 1534.019 MHz processor. Console: colour VGA+ 132x43 Calibrating delay loop... 3060.53 BogoMIPS Memory: 256568k/262080k available (1263k kernel code, 5124k reserved, 448k data, 88k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 Advanced speculative caching feature present Disabling advanced speculative caching CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbf7 c1cbfbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbf7 c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbf7 c1cbfbff 00000000 00000000 CPU: AMD Athlon(tm) XP 1800+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-3, 2-10, 2-19, 2-20, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178002 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0002 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 000 00 1 0 0 0 0 0 0 00 04 001 01 0 0 0 0 0 1 1 41 05 001 01 0 0 0 0 0 1 1 49 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 001 01 1 1 0 1 0 1 1 71 0c 001 01 0 0 0 0 0 1 1 79 0d 001 01 0 0 0 0 0 1 1 81 0e 001 01 0 0 0 0 0 1 1 89 0f 001 01 0 0 0 0 0 1 1 91 10 001 01 1 1 0 1 0 1 1 99 11 001 01 1 1 0 1 0 1 1 A1 12 001 01 1 1 0 1 0 1 1 A9 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 B1 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ21 -> 0:21 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1533.9693 MHz. ..... host bus clock speed is 266.7772 MHz. cpu: 0, clocks: 2667772, slice: 1333886 CPU0 PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router default [1106/3099] at 00:00.0 PCI->APIC IRQ transform: (B0,I9,P0) -> 18 PCI->APIC IRQ transform: (B0,I15,P0) -> 17 PCI->APIC IRQ transform: (B0,I17,P0) -> 11 PCI->APIC IRQ transform: (B0,I17,P3) -> 21 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Via IRQ fixup for 00:11.2, from 11 to 5 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 ACPI: Core Subsystem version [20011018] ACPI: Subsystem enabled pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hdb: C/H/S=17486/16/255 from BIOS ignored hda: WDC AC28400R, ATA DISK drive hdb: Maxtor 93652U8, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-M1202, ATAPI CD/DVD-ROM drive hdd: WDC WD200BB-32BSA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, (U)DMA hdb: 71346240 sectors (36529 MB) w/2048KiB Cache, CHS=70780/16/63, UDMA(66) hdd: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 /dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 > p3 /dev/ide/host0/bus1/target1/lun0: [PTBL] [2434/255/63] p1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs:warning: CONFIG_REISERFS_CHECK is set ON reiserfs:warning: - it is slow mode for debugging. reiserfs: checking transaction log (device 03:03) ... journal-1153: found in header: first_unflushed_offset 7893, last_flushed_trans_id 857114 journal-1206: Starting replay from offset 7893, trans_id 857115 journal-1299: Setting newest_mount_id to 76 Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 88k freed APIC error on CPU0: 00(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) Real Time Clock Driver v1.10e APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) Adding Swap: 265064k swap-space (priority -1) APIC error on CPU0: 02(02) Adding Swap: 999896k swap-space (priority -2) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) hdc: ATAPI 32X DVD-ROM drive, 256kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 APIC error on CPU0: 02(02) Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) reiserfs:warning: CONFIG_REISERFS_CHECK is set ON reiserfs:warning: - it is slow mode for debugging. reiserfs: checking transaction log (device 03:43) ... journal-1153: found in header: first_unflushed_offset 7766, last_flushed_trans_id 1283897 journal-1206: Starting replay from offset 7766, trans_id 1283898 journal-1299: Setting newest_mount_id to 189 Using r5 hash to sort names ReiserFS version 3.6.25 APIC error on CPU0: 02(02) reiserfs:warning: CONFIG_REISERFS_CHECK is set ON reiserfs:warning: - it is slow mode for debugging. reiserfs: checking transaction log (device 16:41) ... journal-1153: found in header: first_unflushed_offset 7785, last_flushed_trans_id 1464 journal-1206: Starting replay from offset 7785, trans_id 1465 journal-1299: Setting newest_mount_id to 16 Using tea hash to sort names ReiserFS version 3.6.25 APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) APIC error on CPU0: 02(02) Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) tulip0: EEPROM default media type 100baseTx. tulip0: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. tulip0: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. tulip0: Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block. tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block. eth0: Macronix 98713 PMAC rev 0 at 0xd0af8000, 00:40:33:A5:0F:5B, IRQ 17.