From: <joerg.beyer@email.de>
To: "lkml" <linux-kernel@vger.kernel.org>
Subject: Re: setpci is no changing values
Date: Sun, 1 Sep 2002 12:41:12 +0200 [thread overview]
Message-ID: <200209011041.g81AfBX05372@mailgate5.cinetic.de> (raw)
joerg.beyer@email.de schrieb am 31.08.02 23:14:39:
> Hi,
>
> I have some trouble with a laptop's NIC (it's a 8139C realtek chip, I use the rtl8139 module). With
> a lot help I think the problem is tracked down to a problem with the PCI bus bandwidth.
...
With the help of Mark Hahn I figuerd out, that the problem was the Bridge
setting, not the NIC setting.
The VT8363/8365 Bridge was blocking/slowing down the bus.
After allowing this device to do fast back-to-back writes
it works _much_ better, i.e. no more errors on the NIC.
If I encounter no negative effects of this setting, then I consider
this a working setup.
Thank you very much for you help!
Joerg
next reply other threads:[~2002-09-01 10:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-01 10:41 joerg.beyer [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-08-31 21:14 joerg.beyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200209011041.g81AfBX05372@mailgate5.cinetic.de \
--to=joerg.beyer@email.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®