From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 3 Sep 2002 04:07:06 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 3 Sep 2002 04:07:06 -0400 Received: from h-64-105-35-215.SNVACAID.covad.net ([64.105.35.215]:20900 "EHLO freya.yggdrasil.com") by vger.kernel.org with ESMTP id ; Tue, 3 Sep 2002 04:07:05 -0400 From: "Adam J. Richter" Date: Tue, 3 Sep 2002 01:11:18 -0700 Message-Id: <200209030811.BAA03979@adam.yggdrasil.com> To: aia21@cantab.net, linux-kernel@vger.kernel.org Subject: Re: [BUG] 2.5.31 doesn't boot - looks IDE related Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org It turns out that the stock 2.5.33 drivers/ide (Jens's port of the 2.4 IDE drivers to 2.5) also exhibits this problem, so it appears not to be a bug due to Marcin's drivers/ide changes. Adam J. Richter __ ______________ 575 Oroville Road adam@yggdrasil.com \ / Milpitas, California 95035 +1 408 309-6081 | g g d r a s i l United States of America "Free Software For The Rest Of Us." I wrote: >On 2002-08-13, Anton Altaparmakov wrote: > >>2.5.31 dies with the last messages being: >>[snip] >>ATA/ATAPI device driver v7.0.0 >>ATA: PCI bus speed 33.3MHz >>ATA: VIA Technologies, Inc. Bus Master IDE, PCI slot 00:07.1 >>ATA: chipset rev.: 6 >>ATA: non-legacy mode: IRQ probe delayed >>VP_IDE: VIA vt82c686b (rev 40) ATA UDMA100 controller on PCI 00:07.1 >> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio >> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA >>hda: IC35L040AVER07-0, DISK drive >>hdc: LITE-ON LTR-12102B, ATAPI CD/DVD-ROM drive >>hdd: Maxtor 90288D2, DISK drive >>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >>ide1 at 0x170-0x177,0x376 on irq 15 >> > > I tried to reproduce your problem on two Via motherboard, >which I set up with the following configuration: > > Primary IDE: Master: A Maxtor IDE hard disk as master. > > Secondary IDE: Master: An ATAPI CDROM or DVD-ROM drive. > Slave: Another Maxtor IDE hard disk (17.2GB) > > One of the motherboards had an 866MHz CPU and did not experience >any problem. > > The other one, with a 1GHz CPU, failed to recognize the ATAPI >CDROM, but recognized both hard disks, and did not hang. Rebooting with >the slave hard disk removed resulted in the ATAPI drive to being >recognized. Patching from approxiamtely stock 2.5.31 to Martin's IDE 115 >on the misbehaving machine CDROM did not change these behaviors. [...]