From: "Daniela Engert" <dani@ngrt.de>
To: "Zwane Mwaikambo" <zwane@mwaikambo.name>
Cc: "Alan Cox" <alan@lxorguk.ukuu.org.uk>,
"Andre Hedrick" <andre@linux-ide.org>,
"Linux Kernel" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH]][2.4-ac] opti621 can't do dma
Date: Wed, 11 Sep 2002 12:09:36 +0200 (CDT) [thread overview]
Message-ID: <20020911095828.ABC056EE9@mail.medav.de> (raw)
In-Reply-To: <Pine.LNX.4.44.0209102026270.1100-100000@linux-box.realnet.co.sz>
On Tue, 10 Sep 2002 20:28:00 +0200 (SAST), Zwane Mwaikambo wrote:
>> The Compaq Armada 1530 Notebook has a Opti FireStar chipset with an IDE
Actually, it's an 1575D.
>> controller which is Ultra DMA capable (but stable only up to MW-DMA
>> mode 2). This one *should* be handled by the Linux opti621 driver (I
>> don't know if it is).
>
>I'd be interested to see an lspci, I'd be mortified if the opti621
>driver really drives that controller ;)
No Linux on that machine, thus no lspci but something similar:
Vendor 1045h OPTi Inc
Device C701h 82C701 FireStar Plus CPU to PCI Bridge
Subsystem ID 0E1103F4h Compaq Armarda
Vendor 1045h OPTi Inc
Device C700h 82C700 FireStar PCI to ISA Bridge
Subsystem ID 0E1103F4h Compaq Armarda
Vendor 1045h OPTi Inc
Device D568h 82C825 FireBridge II PCI EIDE Controller
Subsystem ID 0E1103F4h Compaq Armada
This should be supported by the opti621 driver.
With these devices
disk :IBM-DKLA-23240 (primary master) running at MWord DMA2/PIO4
cdrom:UJDA120 (primary slave) running at PIO4
the chipset shuld be programmed like this:
PCI BIOS V2.10 detected, 1 PCI bus present.
Found embedded Opti FireStar on 0:20.0
00: 45 10 68 D5 05 00 80 02 30 80 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 10 00 00 00 00 00 00 00 00 00 00 F4 03 11 0E
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 2B 00 16 0A 00 00 00 FA 00 00 00 00 00 00 00 00
BusMaster Registers:
00: 08 00 24 00 00 18 EF 00 00 00 04 00 00 00 00 00
VendorID 1045, DeviceID D568, Subsystem VendorID 03F4, DeviceID 0E11
IOBase 1000h (Len 10h)
Control 0: r0 20, w0 20, r1 20, w1 20, c 95, s EE, m 40
Control 1: r0 FF, w0 FF, r1 FF, w1 FF, c FF, s FF, m FF
South bridge (1045/C700 rev 31) on 0:1.0
If you like to run the disk at ultra DMA mode 0, then it looks like
this:
PCI BIOS V2.10 detected, 1 PCI bus present.
Found embedded Opti FireStar on 0:20.0
00: 45 10 68 D5 05 00 80 02 30 80 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 10 00 00 00 00 00 00 00 00 00 00 F4 03 11 0E
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 2B 00 16 0A 01 00 00 FA 00 00 00 00 00 00 00 00
BusMaster Registers:
00: 08 00 A4 00 00 18 EF 00 00 00 84 00 00 00 00 00
VendorID 1045, DeviceID D568, Subsystem VendorID 03F4, DeviceID 0E11
IOBase 1000h (Len 10h)
Control 0: r0 20, w0 20, r1 20, w1 20, c 95, s EE, m 40
Control 1: r0 FF, w0 FF, r1 FF, w1 FF, c FF, s FF, m FF
South bridge (1045/C700 rev 31) on 0:1.0
Ciao,
Dani
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Daniela Engert, systems engineer at MEDAV GmbH
Gräfenberger Str. 32-34, 91080 Uttenreuth, Germany
Phone ++49-9131-583-348, Fax ++49-9131-583-11
prev parent reply other threads:[~2002-09-11 10:04 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-10 17:22 Zwane Mwaikambo
2002-09-10 17:16 ` Daniela Engert
2002-09-10 18:28 ` Zwane Mwaikambo
2002-09-11 10:09 ` Daniela Engert [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020911095828.ABC056EE9@mail.medav.de \
--to=dani@ngrt.de \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=andre@linux-ide.org \
--cc=linux-kernel@vger.kernel.org \
--cc=zwane@mwaikambo.name \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®