mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: zhengchuanbo <zhengcb@netpower.com.cn>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: "becker@scyld.com" <becker@scyld.com>
Subject: problem with sundance driver for dfe-550fx (DL10050B)
Date: Wed, 11 Sep 2002 21:39:1 +0800	[thread overview]
Message-ID: <200209112144446.SM00872@zhengcb> (raw)


i tried to test the dfe-550fx card with the new driver from Donald Becker. the version is "sundance.c:v1.09a 7/16/2002". 
the chip of the d-link card is DL10050B. a DL10050A card work with the v1.02d driver. but there are some problems with the DL10050B one.
the kernel version is 2.4.19pre1.
i run the following commands:
	insmod pci-scan.o
	insmod sundance.o
and it worked. the log is as follows:

Sep 11 21:20:58 netpower kernel: pci-scan.c:v1.10 7/13/2002  Donald Becker <beck
er@scyld.com> http://www.scyld.com/linux/drivers.html
Sep 11 21:21:01 netpower kernel: sundance.c:v1.09a 7/16/2002  Written by Donald
Becker <becker@scyld.com>
Sep 11 21:21:01 netpower kernel:   http://www.scyld.com/network/sundance.html
Sep 11 21:21:01 netpower kernel: eth2: OEM Sundance Technology ST201 at 0xe800,
00:05:5d:5e:b9:dc, IRQ 24.
Sep 11 21:21:01 netpower kernel: eth2: MII PHY found at address 1, status 0x7809
 advertising 01e1.
Sep 11 21:21:01 netpower kernel: eth3: OEM Sundance Technology ST201 at 0xe400,
00:05:5d:5e:b9:df, IRQ 22.
Sep 11 21:21:01 netpower kernel: eth3: MII PHY found at address 1, status 0x7809
 advertising 01e1.

then when i run the cmd "ifconfig eth2 192.168.0.10"  to bring the card to work,it failed. the problem is as follows,
	sh-2.03# ifconfig eth2 192.168.0.10
	SIOCSIFFLAGS: No such device
and there is no log for this.  so is there some problem on the support of DL10050B? 

please cc. thanks.

zhengchuanbo
zhengcb@netpower.com.cn


                 reply	other threads:[~2002-09-11 13:31 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200209112144446.SM00872@zhengcb \
    --to=zhengcb@netpower.com.cn \
    --cc=becker@scyld.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®