From: Gregoire Favre <greg@ulima.unil.ch>
To: linux-kernel@vger.kernel.org
Subject: usb-datafab not working?
Date: Sat, 28 Sep 2002 18:39:53 +0200 [thread overview]
Message-ID: <20020928163953.GA29803@ulima.unil.ch> (raw)
Hello,
I have tried with 2.5.39 and 2.4.20-pre7-ac3 and no success... With
2.4.20-pre7-ac3:
usb-uhci.c: $Revision: 1.275 $ time 18:56:01 Sep 21 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Setting latency timer of device 00:1d.7 to 64
hcd.c: ehci-hcd @ 00:1d.7, Intel Corp. 82801DB USB EHCI Controller
hcd.c: irq 23, pci mem e3a49c00
usb.c: new USB bus registered, assigned bus number 3
hcd.c: remove: 00:1d.7, state 0
usb.c: USB bus 3 deregistered
usbdevfs: remount parameter error
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:1d.0-2, assigned address 2
scsi2 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 2, frame# 588
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 0
SCSI device sdc: 125185 512-byte hdwr sectors (64 MB)
sdc: Write Protect is off
/dev/scsi/host2/bus0/target0/lun0: p1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
SCSI error: host 2 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
VFS: Disk change detected on device 08:20
SCSI device sdc: 125185 512-byte hdwr sectors (64 MB)
sdc: Write Protect is off
/dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:20, sector 0
I/O error: dev 08:20, sector 0
SCSI error: host 2 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
VFS: Disk change detected on device 08:20
SCSI device sdc: 125185 512-byte hdwr sectors (64 MB)
sdc: Write Protect is off
/dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:20, sector 0
I/O error: dev 08:20, sector 0
SCSI error: host 2 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
VFS: Disk change detected on device 08:20
SCSI device sdc: 125185 512-byte hdwr sectors (64 MB)
sdc: Write Protect is off
/dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:20, sector 0
I/O error: dev 08:20, sector 0
SCSI error: host 2 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
VFS: Disk change detected on device 08:20
SCSI device sdc: 125185 512-byte hdwr sectors (64 MB)
sdc: Write Protect is off
/dev/scsi/host2/bus0/target0/lun0: I/O error: dev 08:20, sector 0
I/O error: dev 08:20, sector 0
>From lsmod:
usb-storage 29424 0
usb-uhci 23052 0 (unused)
>From lspci -v:
00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Micro-star International Co Ltd: Unknown device 3982
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d800 [size=32]
00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Micro-star International Co Ltd: Unknown device 3982
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at dc00 [size=32]
00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 01) (prog-if 20 [EHCI])
Subsystem: Micro-star International Co Ltd: Unknown device 3981
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at dfffbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>
I got a datafab usb compact flash reader that works pretty well from an
iMac under OSX and on the same machine under W98...
Is there something I should try?
Thank you very much,
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
reply other threads:[~2002-09-28 16:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020928163953.GA29803@ulima.unil.ch \
--to=greg@ulima.unil.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®