From: "Jeff V. Merkey" <jmerkey@vger.timpanogas.org>
To: Ken Savage <kens1835@shaw.ca>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 3ware Escalade 7500 init problems on 2.4.19
Date: Thu, 3 Oct 2002 10:36:24 -0700 [thread overview]
Message-ID: <20021003103624.B22409@vger.timpanogas.org> (raw)
In-Reply-To: <200210020859.54621.kens1835@shaw.ca>; from kens1835@shaw.ca on Wed, Oct 02, 2002 at 08:59:54AM -0700
You need to set the system to IO-APIC mode if you are running
a UP system. I have seen this problem when the unit is mapped
to the 8259 PIC. You will note the IRQ setting was 11, not 20X,
etc.
Jeff
On Wed, Oct 02, 2002 at 08:59:54AM -0700, Ken Savage wrote:
> Hi there..
>
> Just received a 3ware 7500-8 RAID card and am trying to get it installed
> on a dual Athlon system with 4GB of RAM, running 2.4.19.
>
> SCSI support and SCSI disk support are enabled.
> Low level support for 3w-xxxx is enabled.
> The RAID has been flashed to the latest hardware revision.
>
> Kernel loads up fine, and gets to initializing the card, where it waits
> for a while as it attempts to init and reinit, etc, the card. Ultimately,
> it simply resets the card and takes the card offline. 'dmesg' reports
> the following in the kernel log:
>
> scsi0 : Found a 3ware Storage Controller at 0xc400, IRQ: 11, P-chip: 1.3
> scsi0 : 3ware Storage Controller
> 3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
> 3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
> 3w-xxxx: scsi0: Reset succeeded.
> 3w-xxxx: scsi0: Unit #0: Command (0xf4d53800) timed out, resetting card.
> scsi: device set offline - not ready or command retry failed after host reset:
> host 0 channel 0 id 0 lun 0
>
>
> Any ideas what the problem might be?
>
> Ken Savage kens1835@shaw.ca
> AllResearch.com
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2002-10-03 16:38 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-02 15:59 Ken Savage
2002-10-02 17:01 ` Bryan O'Sullivan
2002-10-02 17:18 ` Ken Savage
2002-10-03 17:36 ` Jeff V. Merkey [this message]
2002-10-02 17:38 Adam Radford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021003103624.B22409@vger.timpanogas.org \
--to=jmerkey@vger.timpanogas.org \
--cc=kens1835@shaw.ca \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®