From: Teodor Iacob <Teodor.Iacob@astral.kappa.ro>
To: linux-kernel@vger.kernel.org
Subject: 2.4.1[89] Warning - running *really* short on DMA buffers .. and crash
Date: Wed, 9 Oct 2002 19:04:58 +0300 [thread overview]
Message-ID: <20021009160458.GA23810@linux.kappa.ro> (raw)
Hello,
I have this machine running either 2.4.18 or 19 with the same bad behavior.
I get from time to time the message in the Subject and if I do something
that uses the disk somewhat more it just reboots without any warning.
(for example if I use fsck or I type sync a lot when untarring .. )
Anyway the hardware configuration is like this:
2 X PIII 667MHz
MB chipset VIA VT82C693A/694x SMP board
512MB
2 Intel Etherexpress 82557
and the scsi adapter:
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 19160B Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Vendor: QUANTUM Model: ATLAS10K2-TY184L Rev: DA40
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
SCSI device sda: 35860910 512-byte hdwr sectors (18361 MB)
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
It's really annoying to have the computer reboot without any warning or message to
track something ...
Teo
reply other threads:[~2002-10-09 15:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021009160458.GA23810@linux.kappa.ro \
--to=teodor.iacob@astral.kappa.ro \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®