From: Stephen Rothwell <sfr@canb.auug.org.au>
To: "David S. Miller" <davem@redhat.com>
Cc: linux-kernel@vger.kernel.org, anton@samba.org
Subject: Re: [PATCH] bring sparc{64} into the generic siginfo fold
Date: Thu, 10 Oct 2002 16:07:32 +1000 [thread overview]
Message-ID: <20021010160732.0ac3c50f.sfr@canb.auug.org.au> (raw)
In-Reply-To: <20021009.224232.11156565.davem@redhat.com>
Hi Dave,
On Wed, 09 Oct 2002 22:42:32 -0700 (PDT) "David S. Miller" <davem@redhat.com> wrote:
>
> From: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Thu, 10 Oct 2002 15:43:32 +1000
>
> This patch (uncompiled, untested) enables sparc and sparc64 to use
> the gerneic siginfo structure. Hope you like it :-)
>
> Thanks I'll have a look :)
This one is on top of the previous one and removes the arch specific
version of copy_siginfo_to_user from sparc and sparc64.
difstat:
arch/sparc/kernel/signal.c | 32 --------------------------------
arch/sparc64/kernel/signal.c | 32 --------------------------------
include/asm-sparc/siginfo.h | 1 -
include/asm-sparc64/siginfo.h | 1 -
kernel/signal.c | 3 +++
5 files changed, 3 insertions(+), 66 deletions(-)
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/
diff -ruN 2.5.41-1.747-si.1/arch/sparc/kernel/signal.c 2.5.41-1.747-si.2/arch/sparc/kernel/signal.c
--- 2.5.41-1.747-si.1/arch/sparc/kernel/signal.c 2002-10-08 12:02:40.000000000 +1000
+++ 2.5.41-1.747-si.2/arch/sparc/kernel/signal.c 2002-10-10 16:00:14.000000000 +1000
@@ -90,38 +90,6 @@
__siginfo_fpu_t fpu_state;
};
-int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from)
-{
- if (!access_ok(VERIFY_WRITE, to, sizeof(siginfo_t)))
- return -EFAULT;
- if (from->si_code < 0)
- return __copy_to_user(to, from, sizeof(siginfo_t));
- else {
- int err;
-
- /* If you change siginfo_t structure, please be sure
- this code is fixed accordingly.
- It should never copy any pad contained in the structure
- to avoid security leaks, but must copy the generic
- 3 ints plus the relevant union member. */
- err = __put_user(from->si_signo, &to->si_signo);
- err |= __put_user(from->si_errno, &to->si_errno);
- err |= __put_user((short)from->si_code, &to->si_code);
- switch (from->si_code >> 16) {
- case __SI_CHLD >> 16:
- err |= __put_user(from->si_utime, &to->si_utime);
- err |= __put_user(from->si_stime, &to->si_stime);
- /* case __SI_RT: This is not generated by the kernel as of now. */
- err |= __put_user(from->si_status, &to->si_status);
- default:
- err |= __put_user(from->si_uid, &to->si_uid);
- err |= __put_user(from->si_pid, &to->si_pid);
- break;
- }
- return err;
- }
-}
-
/* Align macros */
#define SF_ALIGNEDSZ (((sizeof(struct signal_sframe) + 7) & (~7)))
#define NF_ALIGNEDSZ (((sizeof(struct new_signal_frame) + 7) & (~7)))
diff -ruN 2.5.41-1.747-si.1/arch/sparc64/kernel/signal.c 2.5.41-1.747-si.2/arch/sparc64/kernel/signal.c
--- 2.5.41-1.747-si.1/arch/sparc64/kernel/signal.c 2002-10-08 12:02:40.000000000 +1000
+++ 2.5.41-1.747-si.2/arch/sparc64/kernel/signal.c 2002-10-10 16:03:42.000000000 +1000
@@ -36,38 +36,6 @@
static int do_signal(sigset_t *oldset, struct pt_regs * regs,
unsigned long orig_o0, int ret_from_syscall);
-int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from)
-{
- if (!access_ok (VERIFY_WRITE, to, sizeof(siginfo_t)))
- return -EFAULT;
- if (from->si_code < 0)
- return __copy_to_user(to, from, sizeof(siginfo_t));
- else {
- int err;
-
- /* If you change siginfo_t structure, please be sure
- this code is fixed accordingly.
- It should never copy any pad contained in the structure
- to avoid security leaks, but must copy the generic
- 3 ints plus the relevant union member. */
- err = __put_user(*(long *)&from->si_signo, (long *)&to->si_signo);
- err |= __put_user((short)from->si_code, &to->si_code);
- switch (from->si_code >> 16) {
- case __SI_CHLD >> 16:
- err |= __put_user(from->si_utime, &to->si_utime);
- err |= __put_user(from->si_stime, &to->si_stime);
- case __SI_FAULT >> 16:
- case __SI_POLL >> 16:
- err |= __put_user(from->si_trapno, &to->si_trapno);
- default:
- err |= __put_user(from->si_addr, &to->si_addr);
- break;
- /* case __SI_RT: This is not generated by the kernel as of now. */
- }
- return err;
- }
-}
-
/* {set, get}context() needed for 64-bit SparcLinux userland. */
asmlinkage void sparc64_set_context(struct pt_regs *regs)
{
diff -ruN 2.5.41-1.747-si.1/include/asm-sparc/siginfo.h 2.5.41-1.747-si.2/include/asm-sparc/siginfo.h
--- 2.5.41-1.747-si.1/include/asm-sparc/siginfo.h 2002-10-10 15:17:50.000000000 +1000
+++ 2.5.41-1.747-si.2/include/asm-sparc/siginfo.h 2002-10-10 16:01:26.000000000 +1000
@@ -7,7 +7,6 @@
#define __ARCH_SI_UID_T unsigned int
#define __ARCH_SI_TRAPNO
-#define HAVE_ARCH_COPY_SIGINFO_TO_USER
#include <asm-generic/siginfo.h>
diff -ruN 2.5.41-1.747-si.1/include/asm-sparc64/siginfo.h 2.5.41-1.747-si.2/include/asm-sparc64/siginfo.h
--- 2.5.41-1.747-si.1/include/asm-sparc64/siginfo.h 2002-10-10 15:29:34.000000000 +1000
+++ 2.5.41-1.747-si.2/include/asm-sparc64/siginfo.h 2002-10-10 16:04:29.000000000 +1000
@@ -8,7 +8,6 @@
#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
#define __ARCH_SI_TRAPNO
-#define HAVE_ARCH_COPY_SIGINFO_TO_USER
#include <asm-generic/siginfo.h>
diff -ruN 2.5.41-1.747-si.1/kernel/signal.c 2.5.41-1.747-si.2/kernel/signal.c
--- 2.5.41-1.747-si.1/kernel/signal.c 2002-10-08 12:03:00.000000000 +1000
+++ 2.5.41-1.747-si.2/kernel/signal.c 2002-10-10 16:01:38.000000000 +1000
@@ -1427,6 +1427,9 @@
break;
case __SI_FAULT:
err |= __put_user(from->si_addr, &to->si_addr);
+#ifdef __ARCH_SI_TRAPNO
+ err |= __put_user(from->si_trapno, &to->si_trapno);
+#endif
break;
case __SI_CHLD:
err |= __put_user(from->si_pid, &to->si_pid);
prev parent reply other threads:[~2002-10-10 6:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-10 5:43 Stephen Rothwell
2002-10-10 5:42 ` David S. Miller
2002-10-10 6:07 ` Stephen Rothwell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021010160732.0ac3c50f.sfr@canb.auug.org.au \
--to=sfr@canb.auug.org.au \
--cc=anton@samba.org \
--cc=davem@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®