From: Juri Haberland <juri@koschikode.com>
To: gzp@myhost.mynet ("Gabor Z. Papp")
Cc: linux-kernel@vger.kernel.org
Subject: Re: IDE PDC20268 in Linux 2.4.20-pre10
Date: Fri, 11 Oct 2002 16:16:46 +0200 (CEST) [thread overview]
Message-ID: <20021011141646.DC3601196B@a.mx.spoiled.org> (raw)
In-Reply-To: <4cc4.3da69003.2d455@gzp1.gzp.hu>
In article <4cc4.3da69003.2d455@gzp1.gzp.hu> you wrote:
> * Marcelo Tosatti <marcelo@conectiva.com.br>:
>
> | Here goes pre10.
>
> When will the PDC20268 driver go with UDMA 100 in your tree?
> Before or after 2.4.20?
> PDC20268: IDE controller on PCI bus 02 dev 68
> PCI: Found IRQ 9 for device 02:0d.0
> PCI: Sharing IRQ 9 with 02:09.0
> PDC20268: chipset revision 1
> PDC20268: not 100% native mode: will probe irqs later
> PDC20268: (U)DMA Burst Bit ENABLED Primary MASTER Mode
> Secondary MASTER Mode.
> ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
> ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
> hde: IC35L060AVVA07-0, ATA DISK drive
> hdg: IC35L060AVVA07-0, ATA DISK drive
> ide2 at 0xb800-0xb807,0xb402 on irq 9
> ide3 at 0xb000-0xb007,0xa802 on irq 9
> hde: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63, UDMA(33)
> hdg: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=119150/16/63, UDMA(33)
Uhm, tho following is with 2.4.19-xfs:
PDC20268: IDE controller on PCI bus 00 dev 98
PDC20268: chipset revision 1
PDC20268: not 100% native mode: will probe irqs later
PDC20268: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xfce0-0xfce7, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xfce8-0xfcef, BIOS settings: hdg:pio, hdh:pio
hde: Maxtor 4D080H4, ATA DISK drive
hdg: Maxtor 4G120J6, ATA DISK drive
ide2 at 0xfcc8-0xfccf,0xfcda on irq 10
ide3 at 0xfcd0-0xfcd7,0xfcde on irq 10
hde: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63, UDMA(100)
hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
So there *is* UDMA 100 support...
Cheers,
Juri
--
Juri Haberland <juri@koschikode.com>
next prev parent reply other threads:[~2002-10-11 14:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-08 19:29 Marcelo Tosatti
2002-10-08 23:40 ` Linux 2.4.20-pre10 - drivers/usb/brlvger.c Eyal Lebedinsky
2002-10-11 8:46 ` IDE PDC20268 in Linux 2.4.20-pre10 Gabor Z. Papp
2002-10-11 14:16 ` Juri Haberland [this message]
2002-10-11 15:33 ` Gabor Z. Papp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021011141646.DC3601196B@a.mx.spoiled.org \
--to=juri@koschikode.com \
--cc=gzp@myhost.mynet \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®