[PATCH] 2.5.44 bttv-driver.c

[Bongani <bhlope@mweb.co.za>]

Hi Gerd

You are listing as the maintainer of the bttv driver, so I hope I'm sending
this to the correct person. The bttv drivers are printing the following
following "debug" information, which is filling up my messages file the patch
bellow seems to fix it.

Oct 20 04:03:01 localhost kernel: bttv0: amux: mode=-1 audio=1 signal=no 
mux=4/1 irq=yes
Oct 20 04:03:01 localhost kernel: bttv0: amux: mode=-1 audio=1 signal=yes 
mux=1/1 irq=yes
Oct 20 04:03:08 localhost kernel: bttv0: amux: mode=-1 audio=1 signal=no 
mux=4/1 irq=yes
Oct 20 04:03:08 localhost kernel: bttv0: amux: mode=-1 audio=1 signal=yes 
mux=1/1 irq=yes
Oct 20 04:03:09 localhost kernel: bttv0: amux: mode=-1 audio=1 signal=no 
mux=4/1 irq=yes
Oct 20 04:03:09 localhost kernel: bttv0: amux: mode=-1 audio=1 signal=yes 
mux=1/1 irq=yes
Oct 20 04:03:10 localhost kernel: bttv0: amux: mode=-1 audio=1 signal=no 
mux=4/1 irq=yes

Could you please foward the patch to Linus.(If you think its correct that is 
;)

Thanx

--- linux-2.5/drivers/media/video/bttv-driver.c.old     2002-10-21 
00:08:50.000000000 +0200
+++ linux-2.5/drivers/media/video/bttv-driver.c 2002-10-21 00:09:17.000000000 
+0200
@@ -813,7 +813,7 @@
        i2c_mux = mux = (btv->audio & AUDIO_MUTE) ? AUDIO_OFF : btv->audio;
        if (btv->opt_automute && !signal && !btv->radio_user)
                mux = AUDIO_OFF;
-       printk("bttv%d: amux: mode=%d audio=%d signal=%s mux=%d/%d irq=%s\n",
+       dprintk(KERN_DEBUG "bttv%d: amux: mode=%d audio=%d signal=%s mux=%d/%d 
irq=%s\n",
               btv->nr, mode, btv->audio, signal ? "yes" : "no",
               mux, i2c_mux, in_interrupt() ? "yes" : "no");