From: Gregoire Favre <greg@ulima.unil.ch>
To: linux-kernel@vger.kernel.org
Subject: 2.5.44 Call Trace
Date: Mon, 21 Oct 2002 11:33:41 +0200 [thread overview]
Message-ID: <20021021093341.GG2917@ulima.unil.ch> (raw)
Hello,
I got those:
Debug: sleeping function called from illegal context at include/asm/semaphore.h:119
Call Trace: [<c01d57b8>] [<c01d575a>] [<d91fc107>] [<d92093e8>] [<d9208d00>] [<c01d7f68>] [<d9209414>] [<d92093e8>] [<c01d6c65>] [<d92093f4>] [<d92093e8>] [<c01d6d1f>] [<d92093e8>] [<c01cd36b>] [<d9208d00>] [<d9208d00>] [<d91fbf6c>] [<d9208d00>] [<c02238b9>] [<d9208d00>] [<d91ff58a>] [<d9208d00>] [<c011c151>] [<d91ed060>] [<d91ed060>] [<c010786b>]
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 2940 SCSI adapter>
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:2): 10.000MB/s transfers (10.000MHz, offset 8)
Vendor: LACIE Model: CDRW-12432S Rev: 1.21
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
end_request: I/O error, dev 03:40, sector 0
end_request: I/O error, dev 03:40, sector 0
Badness in put_device at drivers/base/core.c:139
Call Trace: [<c01d58fe>] [<c022ecf0>] [<c022319c>] [<c0222f58>] [<d9208d00>] [<c0223adc>] [<d9208d00>] [<c0222ff0>] [<c011cb23>] [<d91ff5bf>] [<d9208d00>] [<c011d123>] [<c011c3d3>] [<c010786b>]
Badness in put_device at drivers/base/core.c:139
Call Trace: [<c01d58fe>] [<c022ae37>] [<c022319c>] [<c0222f58>] [<d9208d00>] [<c0223adc>] [<d9208d00>] [<c0222ff0>] [<c011cb23>] [<d91ff5bf>] [<d9208d00>] [<c011d123>] [<c011c3d3>] [<c010786b>]
scsi : 0 hosts left.
Which gives:
dmesg | ksymoops -v /usr/src/linux/vmlinux -m /usr/src/linux/System.map
ksymoops 2.4.5 on i686 2.5.44. Options used
-v /usr/src/linux/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.5.44/ (default)
-m /usr/src/linux/System.map (specified)
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
Call Trace: [<c01d57b8>] [<c01d575a>] [<d91fc107>] [<d92093e8>] [<d9208d00>] [<c01d7f68>] [<d9209414>] [<d92093e8>] [<c01d6c65>] [<d92093f4>] [<d92093e8>] [<c01d6d1f>] [<d92093e8>] [<c01cd36b>] [<d9208d00>] [<d9208d00>] [<d91fbf6c>] [<d9208d00>] [<c02238b9>] [<d9208d00>] [<d91ff58a>] [<d9208d00>] [<c011c151>] [<d91ed060>] [<d91ed060>] [<c010786b>]
Warning (Oops_read): Code line not seen, dumping what data is available
Trace; c01d57b8 <get_device+28/90>
Trace; c01d575a <device_register+4a/80>
Trace; d91fc107 <END_OF_CODE+c0804/????>
Trace; d92093e8 <END_OF_CODE+cdae5/????>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c01d7f68 <driver_make_dir+28/30>
Trace; d9209414 <END_OF_CODE+cdb11/????>
Trace; d92093e8 <END_OF_CODE+cdae5/????>
Trace; c01d6c65 <put_driver+25/90>
Trace; d92093f4 <END_OF_CODE+cdaf1/????>
Trace; d92093e8 <END_OF_CODE+cdae5/????>
Trace; c01d6d1f <driver_register+4f/60>
Trace; d92093e8 <END_OF_CODE+cdae5/????>
Trace; c01cd36b <pci_register_driver+3b/50>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; d91fbf6c <END_OF_CODE+c0669/????>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c02238b9 <scsi_register_host+39/220>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; d91ff58a <END_OF_CODE+c3c87/????>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c011c151 <sys_init_module+4e1/640>
Trace; d91ed060 <END_OF_CODE+b175d/????>
Trace; d91ed060 <END_OF_CODE+b175d/????>
Trace; c010786b <syscall_call+7/b>
Call Trace: [<c01d58fe>] [<c022ecf0>] [<c022319c>] [<c0222f58>] [<d9208d00>] [<c0223adc>] [<d9208d00>] [<c0222ff0>] [<c011cb23>] [<d91ff5bf>] [<d9208d00>] [<c011d123>] [<c011c3d3>] [<c010786b>]
Call Trace: [<c01d58fe>] [<c022ae37>] [<c022319c>] [<c0222f58>] [<d9208d00>] [<c0223adc>] [<d9208d00>] [<c0222ff0>] [<c011cb23>] [<d91ff5bf>] [<d9208d00>] [<c011d123>] [<c011c3d3>] [<c010786b>]
Warning (Oops_read): Code line not seen, dumping what data is available
Trace; c01d58fe <put_device+de/f0>
Trace; c022ecf0 <sg_detach+c0/220>
Trace; c022319c <scsi_host_chk_and_release+1ac/250>
Trace; c0222f58 <scsi_tp_for_each_host+78/90>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c0223adc <scsi_unregister_host+3c/90>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c0222ff0 <scsi_host_chk_and_release+0/250>
Trace; c011cb23 <qm_symbols+f3/1e0>
Trace; d91ff5bf <END_OF_CODE+c3cbc/????>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c011d123 <free_module+e3/f0>
Trace; c011c3d3 <sys_delete_module+d3/2a0>
Trace; c010786b <syscall_call+7/b>
Trace; c01d58fe <put_device+de/f0>
Trace; c022ae37 <sr_detach+47/80>
Trace; c022319c <scsi_host_chk_and_release+1ac/250>
Trace; c0222f58 <scsi_tp_for_each_host+78/90>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c0223adc <scsi_unregister_host+3c/90>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c0222ff0 <scsi_host_chk_and_release+0/250>
Trace; c011cb23 <qm_symbols+f3/1e0>
Trace; d91ff5bf <END_OF_CODE+c3cbc/????>
Trace; d9208d00 <END_OF_CODE+cd3fd/????>
Trace; c011d123 <free_module+e3/f0>
Trace; c011c3d3 <sys_delete_module+d3/2a0>
Trace; c010786b <syscall_call+7/b>
2 warnings issued. Results may not be reliable.
I don't know what to do with those???
Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
next reply other threads:[~2002-10-21 9:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-10-21 9:33 Gregoire Favre [this message]
2002-10-21 15:58 ` Mike Anderson
2002-10-21 20:47 ` Gregoire Favre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021021093341.GG2917@ulima.unil.ch \
--to=greg@ulima.unil.ch \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome