Re: [PATCH] scsi_error device offline fix

[Patrick Mansfield <patmans@us.ibm.com>]

On Mon, Oct 21, 2002 at 01:01:26PM -0700, andy barlak wrote:
> 
> Sorry,  used the wrong dmesg file for the copy and paste of the error message.
> 
> yes the printk error message issued is:
> 
> scsi: Device offlined - not ready or command retry failed after error recovery:
> host 0 channel 0 id 0 lun 0
> 
> over and over through all ids, existing or not.
> Patch was successfully applied to 2.5.44.

I thought it could be one of the INQUIRY related commands to get the
id/serial numbers, since in your (previous) dmesg output, the failure
occured after the print_inquiry() call on the same target before any
upper level attaches.

But now you are getting nothing at all, not even any of the print_inquiry()
output? 

Like you got just before the failures in your original message:

Vendor: CONNER    Model: CFP2107E  2.14GB  Rev: 1423
Type:   Direct-Access                      ANSI SCSI revision: 02
Vendor: SEAGATE   Model: SX423451W         Rev: 9E18
Type:   Direct-Access                      ANSI SCSI revision: 02

Can you turn on all scsi logging - with CONFIG_SCSI_LOGGING enabled,
on your boot command line add a "scsi_logging=1" and send
the output.

-- Patrick Mansfield