Linux version 2.2.20-idepci (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr 20 12:45:19 EST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0009f000 @ 00000000 (usable)
 BIOS-e820: 0fef0000 @ 00100000 (usable)
Detected 1716933 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3420.97 BogoMIPS
Memory: 257592k/262080k available (1164k kernel code, 412k reserved, 2840k data, 72k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
8K L1 data cache
12K L1 instruction cache
8192K L1 instruction cache
CPU: L1 I Cache: 8204K  L1 D Cache: 8K
CPU:               Intel(R) Pentium(R) 4 CPU 1.70GHz
CPU: Intel               Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfaaa0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5 
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: MAXTOR 4K080H4, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CDROM drive
hdd: LITE-ON LTR-12101B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: MAXTOR 4K080H4, 76319MB w/2000kB Cache, CHS=9729/255/63
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.11
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html
pcnet32.c: PCI bios is present, checking for devices...
rtl8139.c:v1.07 5/6/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth0: RealTek RTL8139 Fast Ethernet at 0xe000, IRQ 11, 00:20:ed:3a:f5:ee.
via-rhine.c:v1.08b-LK1.0.1 12/14/2000  Written by Donald Becker
  http://www.scyld.com/network/via-rhine.html
Partition check:
 hda: hda1 hda2 hda3
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
Adding Swap: 248996k swap-space (priority -1)
eth1: 8139too Fast Ethernet driver 0.9.18-pre4 Jeff Garzik <jgarzik@mandrakesoft.com>
eth1: Linux-2.2 bug reports to Jens David <dg1kjd@afthd.tu-darmstadt.de>
eth1: RealTek RTL8139 Fast Ethernet board found at 0xd0028000, IRQ 11
eth1: Chip is 'RTL-8139C' - MAC address '00:20:ed:3a:f5:ee'.