From: Florian Lohoff <flo@rfc822.org>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: ALI 1533 / hang on boot / vaio c1mhp / 2.4.19 + acpi backport
Date: Mon, 18 Nov 2002 12:52:32 +0100 [thread overview]
Message-ID: <20021118115232.GA553@paradigm.rfc822.org> (raw)
In-Reply-To: <1037573400.5356.1.camel@irongate.swansea.linux.org.uk>
[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]
On Sun, Nov 17, 2002 at 10:50:00PM +0000, Alan Cox wrote:
> On Sun, 2002-11-17 at 19:47, Florian Lohoff wrote:
> >
> > Hi,
> > i am seeing a hang on boot on a Crusoe based Vaio C1MHP when enabling
> > the ALI IDE Driver:
> >
> > These are the last lines:
> >
> > Unform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33Mhz system bus speed for PIO modes: override with idebus=xx
> > ALI15X3: IDE controller on PCI bus 00 dev 80
> > pci_irq-0293 [05] acpi_pci_irq_derive : Unable to derive IRQ for device 00:10.0
> > PCI: No IRQ known for interrupt pin A of device 00:10.0 - using IRQ 255
> > ALI15X3: chipset revision 196
> > ALI15X3: not 100% native mode: will probe irqs later
>
> Try it without the ACPI first. Let me know if that also hangs
It does - With acpi=off and acpi=off pci=biosirq (as mentioned in that
crash). I also tried the somewhere mentioned UDMA66 force (ide0=ata66
ide1=ata66) which does get over this point but fails to mount the root
filesystem with IDE errors.
Flo
--
Florian Lohoff flo@rfc822.org +49-5201-669912
Heisenberg may have been here.
[-- Attachment #2: Type: application/pgp-signature, Size: 232 bytes --]
next prev parent reply other threads:[~2002-11-18 11:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-17 19:47 Florian Lohoff
2002-11-17 22:50 ` Alan Cox
2002-11-18 11:52 ` Florian Lohoff [this message]
2002-11-18 13:04 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021118115232.GA553@paradigm.rfc822.org \
--to=flo@rfc822.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®