From: Richard Henderson <rth@twiddle.net>
To: Bjoern Brauel <bjb@gentoo.org>
Cc: marcelo@conectiva.com.br, linux-kernel@vger.kernel.org
Subject: Re: patch: linux-2.4.20 alpha broken cia(rev1) fix
Date: Sun, 1 Dec 2002 23:33:09 -0800 [thread overview]
Message-ID: <20021201233309.A32203@twiddle.net> (raw)
In-Reply-To: <3DE7A5F4.5030503@gentoo.org>; from bjb@gentoo.org on Fri, Nov 29, 2002 at 06:37:56PM +0100
On Fri, Nov 29, 2002 at 06:37:56PM +0100, Bjoern Brauel wrote:
> The attached patch fixes the initialization for CIA revision 1 chips
> that can be found on most Alcor machines. As it is impossible to boot
> such a box together with the Qlogic ISP SCSI controller without this
> patch I believe it is important to include it in the official kernel.
Try this version instead. Control structures should not be
replicated in different functions like that. It's a sure
recipie for one of them getting out of sync.
r~
===== arch/alpha/kernel/core_cia.c 1.6 vs edited =====
--- 1.6/arch/alpha/kernel/core_cia.c Mon Feb 4 23:52:51 2002
+++ edited/arch/alpha/kernel/core_cia.c Sun Dec 1 23:26:06 2002
@@ -370,7 +370,7 @@
}
static inline void
-cia_prepare_tbia_workaround(void)
+cia_prepare_tbia_workaround(int window)
{
unsigned long *ppte, pte;
long i;
@@ -382,10 +382,10 @@
for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
ppte[i] = pte;
- *(vip)CIA_IOC_PCI_W1_BASE = CIA_BROKEN_TBIA_BASE | 3;
- *(vip)CIA_IOC_PCI_W1_MASK = (CIA_BROKEN_TBIA_SIZE*1024 - 1)
- & 0xfff00000;
- *(vip)CIA_IOC_PCI_T1_BASE = virt_to_phys(ppte) >> 2;
+ *(vip)CIA_IOC_PCI_Wn_BASE(window) = CIA_BROKEN_TBIA_BASE | 3;
+ *(vip)CIA_IOC_PCI_Wn_MASK(window)
+ = (CIA_BROKEN_TBIA_SIZE*1024 - 1) & 0xfff00000;
+ *(vip)CIA_IOC_PCI_Tn_BASE(window) = virt_to_phys(ppte) >> 2;
}
static void __init
@@ -605,8 +605,7 @@
do_init_arch(int is_pyxis)
{
struct pci_controller *hose;
- int temp;
- int cia_rev;
+ int temp, cia_rev, tbia_window;
cia_rev = *(vip)CIA_IOC_CIA_REV & CIA_REV_MASK;
printk("pci: cia revision %d%s\n",
@@ -715,8 +714,20 @@
are compared against W_DAC. We can, however, directly map 4GB,
which is better than before. However, due to assumptions made
elsewhere, we should not claim that we support DAC unless that
- 4GB covers all of physical memory. */
- if (is_pyxis || max_low_pfn > (0x100000000 >> PAGE_SHIFT)) {
+ 4GB covers all of physical memory.
+
+ On CIA rev 1, apparently W1 and W2 can't be used for SG.
+ At least, there are reports that it doesn't work for Alcor.
+ In that case, we have no choice but to use W3 for the TBIA
+ workaround, which means we can't use DAC at all. */
+
+ tbia_window = 1;
+ if (is_pyxis) {
+ *(vip)CIA_IOC_PCI_W3_BASE = 0;
+ } else if (cia_rev == 1) {
+ *(vip)CIA_IOC_PCI_W1_BASE = 0;
+ tbia_window = 3;
+ } else if (max_low_pfn > (0x100000000 >> PAGE_SHIFT)) {
*(vip)CIA_IOC_PCI_W3_BASE = 0;
} else {
*(vip)CIA_IOC_PCI_W3_BASE = 0x00000000 | 1 | 8;
@@ -728,7 +739,7 @@
}
/* Prepare workaround for apparently broken tbia. */
- cia_prepare_tbia_workaround();
+ cia_prepare_tbia_workaround(tbia_window);
}
void __init
===== include/asm-alpha/core_cia.h 1.4 vs edited =====
--- 1.4/include/asm-alpha/core_cia.h Mon Feb 4 23:55:11 2002
+++ edited/include/asm-alpha/core_cia.h Sun Dec 1 20:23:23 2002
@@ -202,6 +202,10 @@
#define CIA_IOC_PCI_W3_MASK (IDENT_ADDR + 0x8760000740UL)
#define CIA_IOC_PCI_T3_BASE (IDENT_ADDR + 0x8760000780UL)
+#define CIA_IOC_PCI_Wn_BASE(N) (IDENT_ADDR + 0x8760000400UL + (N)*0x100)
+#define CIA_IOC_PCI_Wn_MASK(N) (IDENT_ADDR + 0x8760000440UL + (N)*0x100)
+#define CIA_IOC_PCI_Tn_BASE(N) (IDENT_ADDR + 0x8760000480UL + (N)*0x100)
+
#define CIA_IOC_PCI_W_DAC (IDENT_ADDR + 0x87600007C0UL)
/*
next prev parent reply other threads:[~2002-12-02 7:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-29 17:37 Bjoern Brauel
2002-12-02 7:33 ` Richard Henderson [this message]
2002-12-02 21:23 ` Folkert van Heusden
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021201233309.A32203@twiddle.net \
--to=rth@twiddle.net \
--cc=bjb@gentoo.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo@conectiva.com.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome