From: "bladi" <bladi-sec@novasec.es>
To: linux-kernel@vger.kernel.org
Subject: Problem with 2.4.21-pre1 Promise PDC20276
Date: Sat, 14 Dec 2002 16:20:08 +0100 [thread overview]
Message-ID: <20021214152008.M92869@novasec.es> (raw)
Hi.
i have PDC20276 BIOS ver 2.20.1020.13 promise device
And with kernel 2.4.21-pre1 the kernel recognize correctly the promise card
but not the IDE devices. With 2.4.20 it work correctly using the same .config
file.
--------- 2.4.21-pre1 -----------------
PDC20276: IDE controller at PCI slot 00:0f.0
PDC20276: chipset revision 1
PDC20276: not 100% native mode: will probe irqs later
PDC20276: neither IDE port enabled (BIOS)
I try to load as kernel module too and pdc202xx_new.o give me the same error.
/proc/ide/pdcnew
MBFastTrak 133 Lite Chipset.
---------- 2.4.20 -----------
PDC20276: IDE controller on PCI bus 00 dev 78
PDC20276: chipset revision 1
PDC20276: not 100% native mode: will probe irqs later
PDC20276: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER
Mode. ide2: BM-DMA at 0xd000-0xd007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xd008-0xd00f, BIOS settings: hdg:pio, hdh:pio
/proc/ide/pdc202xx
PROMISE Ultra series driver Ver 1.20.0.7 2002-05-23 Adapter: Ultra Series
--------------- Primary Channel ---------------- Secondary Channel
------------- enabled enabled
66 Clocking enabled enabled
Mode MASTER MASTER
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1
------DMA enabled: no no yes no
UDMA Mode: 0 0 2 0
PIO Mode: 0 0 4 0
--
NovaSec Servicios de Seguridad
http://www.novasec.es
C\ Evaristo San Miguel 4 2º6 (Princesa)
28008 Madrid (España)
Tel: 91 547 30 51
Fax: 91 559 41 75
reply other threads:[~2002-12-14 15:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021214152008.M92869@novasec.es \
--to=bladi-sec@novasec.es \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®