From: "D.A.M. Revok" <marvin@synapse.net>
To: Manish Lachwani <manish@Zambeel.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.4.19, don't "hdparm -I /dev/hde" if hde is on a Asus A7V133 Promise ctrlr, or...
Date: Wed, 18 Dec 2002 05:38:03 -0500 [thread overview]
Message-ID: <200212180538.03296.marvin@synapse.net> (raw)
In-Reply-To: <233C89823A37714D95B1A891DE3BCE5202AB1B35@xch-a.win.zambeel.com>
Ahem.
You /may/ want to remind me, next time, that umounting all filesystems
except root, remounting root read-only, AND raid-stop'ing all arrays
would be a good idea before doing this ( I forgot the last one )
Also, it seems that all drives de-allocate a sector every time I do this,
and this is costing my system integrity...
Yes, it happens on all drives on the controller, and I've 2:
IBM 60GXP, 40GB == /dev/hde
Quantum LM15, 15GB == /dev/hdg
booting into multiuser command-line mode, no X, login as root, umount
everything, "smartctl -a /dev/hde" ( or hdg ) gets 2 information lines,
the second being the model# of the drive, and it never reaches the third
line ( the newline doesn't appear ), and the drive-light comes on, and
it's permanently hanged.
I'd thought this would be implicit in the
* "cat /proc/ide/hde/identify" gets the same results *
comment I'd made previously, but did it out of curiosity...
When I did it on the Quantum, the Quantum's drive-light came on ( it's in
a "mobile-rack" ), so it seems that the drive-light actually is still
connected to the drive at that point, though nothing useful goes on
after...
By the way, I seem to have hit this with the earlier 2.4.x kernels, (
IIRC ), but had /so/ much problems with flaky config and flaky distros
at the time, that I didn't get that info out then ( by the time I got a
stable system, I'd forgot, sorry... )
* Tell me which kernels you want me to try ( except ext3-broken ones ),
and I'll do it, so you can scope where-the-break-is better, TIA *
-me
On Tue 17 December, 2002 7:09, you wrote:
>Is it happening with all the drives on the controller? Is it possible
> to immediaately gather the SMART data from the drive after bootup
> using smartctl?
>
>Thanks
>Manish
>
>-----Original Message-----
From: D.A.M. Revok
>To: linux-kernel@vger.kernel.org
>Sent: 12/15/02 12:49 PM
>Subject: 2.4.19, don't "hdparm -I /dev/hde" if hde is on a Asus A7V133
>Promise ctrlr, or...
>
>( that's a capital-aye in the hdparm line )
>
>not even the Magic SysReq key will work.
>
>also, don't
>
>"cd /proc/ide/hde ; cat identify"
>
>... same thing
>drive-light comes on, but have to use the power-switch to get the
>machine
>back, ( lost stuff again, fuck )
>
>
>proc says it's pdc202xx
>
>Promise Ultra series driver Ver 1.20.0.7 2002-05-23
>Adapter: Ultra100 on M/B
--
http://www.drawright.com/
- "The New Drawing on the Right Side of the Brain" ( Betty Edwards,
check "Theory", "Gallery", and "Exercises" )
http://www.ldonline.org/ld_indepth/iep/seven_habits.html
- "The 7 Habits of Highly Effective People" ( this site is same
principles as Covey's book )
http://www.eiconsortium.org/research/ei_theory_performance.htm
- "Working With Emotional Intelligence" ( Goleman: this link is
/revised/ theory, "Working. . . " is practical )
http://www.leadershipnow.com/leadershop/1978-5.html
- Corps Business: The 30 /Management Principles/ of the U.S. Marines (
David Freedman )
next parent reply other threads:[~2002-12-18 10:31 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <233C89823A37714D95B1A891DE3BCE5202AB1B35@xch-a.win.zambeel.com>
2002-12-18 10:38 ` D.A.M. Revok [this message]
2002-12-18 10:44 ` Andre Hedrick
2002-12-18 21:35 ` D.A.M. Revok
2002-12-18 22:01 ` Andre Hedrick
2002-12-18 22:38 ` Alan Cox
2002-12-18 21:58 ` Andre Hedrick
2002-12-18 22:03 ` D.A.M. Revok
2002-12-19 1:11 ` Alan Cox
2002-12-19 14:40 ` Denis Vlasenko
2002-12-19 10:19 ` Andre Hedrick
2002-12-19 11:14 ` Tomas Szepe
2002-12-19 11:45 ` Andre Hedrick
2002-12-19 12:03 ` Tomas Szepe
2002-12-19 12:41 ` Andre Hedrick
2003-01-16 18:54 ` Ookhoi
2002-12-19 15:14 ` Denis Vlasenko
2002-12-19 10:33 ` Andre Hedrick
2002-12-19 18:12 ` Ross Biro
2002-12-19 6:47 ` Ross Vandegrift
[not found] ` <Pine.LNX.4.10.10212181359350.8350-100000@master.linux-ide. org>
2002-12-19 13:26 ` Stephen Satchell
2002-12-21 23:22 Jason Radford
2003-01-17 16:47 ` Paul Jakma
[not found] <200212182204.gBIM48uD000332@darkstar.example.net>
2002-12-18 22:18 ` D.A.M. Revok
2002-12-19 2:02 ` Mike Dresser
-- strict thread matches above, loose matches on Subject: below --
2002-12-15 20:49 D.A.M. Revok
2002-12-15 21:39 ` John Bradford
2002-12-15 22:25 ` D.A.M. Revok
2002-12-15 23:37 ` John Bradford
2002-12-18 18:19 ` Ross Biro
2002-12-18 18:17 ` Ross Biro
2002-12-18 21:10 ` Andre Hedrick
2002-12-18 21:19 ` Ross Biro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200212180538.03296.marvin@synapse.net \
--to=marvin@synapse.net \
--cc=linux-kernel@vger.kernel.org \
--cc=manish@Zambeel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome