On Sun, Jan 12, 2003 at 01:14:03AM +0100, Jean-Daniel Pauget wrote: > > on 2002-12-30, Jeff Garzik wrote : > > > Another holiday, another set of tg3 releases. > > in my seek for unexpected freeze of my box (not yet figured which > hardware is involved exactly) I updated to tg3-1.2a and applied > both tg3-1.2a-00_irqsave and tg3-1.2a-01_mask_rewrite. > as a result, after working a few seconds the network card freezes, and > no ifupdown would permit any recovery. > > on the other hand, with only the first patch tg3-1.2a-00_irqsave, things > seems ok and I'm waiting for my machine to freeze... ...or not. (the freeze > frequency is ~10hours )... Thanks, please do keep us posted. I have attached two patches, with accompanying descriptions, that I have been testing locally on UP and SMP. They are a bit more conservative than tg3-1.2a-01_mask_rewrite while still addressing the same issue. Right now my plan for tg3 version 1.3 (next release) is: tg3-1.2a-00_irqsave tg3-irq-mask-2.patch (attached), and tg3-irq-flush.patch (attached) and maybe the MTU stuff [more on that below] The first patch, 00_irqsave, is a bit too paranoid for DaveM's liking, so even though I will to apply 00_irqsave, that area will get further attention once existing bug reports are resolved. [Note to DaveM -- tg3_timer is not a fast path, so extra paranoia there won't hurt] > though, on your page you mention a fifth patch concerning mtu, as I'm > running with an unusual mtu of 1452 because of internet over internet > encapsulation on my DSL, maybe I'm concerned ? MTU of 1452 should not be a problem. The issue is more of correcting handling of change-MTU condition that rarely happens. Jeff