From: Burton Samograd <kruhft@kruhft.dyndns.org>
To: linux-kernel@vger.kernel.org
Subject: [RFC] /proc/net/if device/address information module
Date: Mon, 20 Jan 2003 22:28:32 -0800 [thread overview]
Message-ID: <20030121062832.GC1736@kruhft.dyndns.org> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1050 bytes --]
Hi all,
I asked a couple of weeks ago if there was a way to get the network
interface information from the proc file system for each network
device on the system and recieved little response. After browsing the
code a bit I decided to write a small module which gives acts as a
minimal replacement for the output of ifconfig, since it seemed that
this information should be easy to find in the /proc/net hierarchy but
wasn't available. After writing it for inet (IP) devices, I decided
to add IPV6 and ATalk since it wasn't much more work.
I've included the code attached (it's not very big) since I know that
at least one person wrote me back saying they wanted this feature.
I'm also interested in comments on the code as I've never written any
kernel code before and would like to know what changes would be needed
(if any) before it would be considered for inclusion in the kernel.
Hope someone finds this useful and any comments appreciated.
--
burton samograd
kruhft@kruhft.dyndns.org
http://kruhftwerk.dyndns.org
[-- Attachment #1.2: Makefile --]
[-- Type: text/plain, Size: 148 bytes --]
KERNELDIR=/usr/src/linux-2.4.20-devel
CFLAGS = -D__KERNEL__ -DMODULE -I$(KERNELDIR)/include -Os -Wall
all: proc_net_if.o
clean:
rm -f *.o *~ core
[-- Attachment #1.3: proc_net_if.c --]
[-- Type: text/plain, Size: 5768 bytes --]
/*
* net/proc_if.c
*
* Adds /proc/net/if/[inet,ipv6,atalk], which contain basic network
* device information for each protocol if supported by the kernel.
* Only tested with inet since that's all I use.
*
* Author: Burton Samograd <kruhft@kruhft.dyndns.org>
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/ipv6.h>
#include <net/if_inet6.h>
#include <linux/atalk.h>
#include <linux/string.h>
#ifdef CONFIG_NET
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *proc_net_if;
static int proc_net_if_init(void);
static void proc_net_if_cleanup(void);
#ifdef CONFIG_IPV6
static struct proc_dir_entry *proc_net_if_ipv6;
static int proc_net_if_ipv6_info(char *page, char**start, off_t off, int count)
{
int len = 0;
struct net_device *device = dev_base;
_raw_read_lock(&dev_base_lock);
MOD_INC_USE_COUNT;
len += sprintf(page+len, "iface\taddr\n");
while(device) {
struct inet6_dev *iface =
(struct inet6_dev*)device->ip6_ptr;
while(iface) {
struct inet6_ifaddr *addrlst = iface->addr_list;
while(addrlst) {
struct in6_addr *addr = &addrlst->addr;
/* correct? i'm not too familiar with ipv6 */
len += printk(page+len, "%s\t%x%x:%x%x:%x%x:%x%x:%x%x:%x%x:%x%x:%x%x\n",
device->name,
addr->s6_addr[0], addr->s6_addr[1],
addr->s6_addr[2], addr->s6_addr[3],
addr->s6_addr[4], addr->s6_addr[5],
addr->s6_addr[6], addr->s6_addr[7],
addr->s6_addr[8], addr->s6_addr[9],
addr->s6_addr[10], addr->s6_addr[11],
addr->s6_addr[12], addr->s6_addr[13],
addr->s6_addr[14], addr->s6_addr[15]
);
addrlst = addrlst->if_next;
}
iface = iface->next;
}
device = device->next;
}
_raw_read_unlock(&dev_base_lock);
MOD_DEC_USE_COUNT;
return len;
}
#endif /* CONFIG_IPV6 */
#ifdef CONFIG_INET
static struct proc_dir_entry *proc_net_if_inet;
static int proc_net_if_inet_info(char *page, char**start, off_t off, int count)
{
int len = 0;
struct net_device *device = dev_base;
_raw_read_lock(&dev_base_lock);
MOD_INC_USE_COUNT;
len += sprintf(page+len, "iface\taddr\t\tbcast\t\tmask\n");
while(device) {
if(device->ip_ptr) {
struct in_ifaddr *iface =
((struct in_device*)device->ip_ptr)->ifa_list;
while(iface) {
len += sprintf(page+len,
"%s\t%8.8x\t%8.8x\t%8.8x\n",
iface->ifa_label, iface->ifa_address,
iface->ifa_broadcast, iface->ifa_mask);
iface = iface->ifa_next;
}
}
device = device->next;
}
_raw_read_unlock(&dev_base_lock);
MOD_DEC_USE_COUNT;
return len;
}
#endif /* CONFIG_INET */
#ifdef CONFIG_ATALK
static struct proc_dir_entry *proc_net_if_atalk;
static int proc_net_if_atalk_info(char *page, char**start, off_t off, int count)
{
int len = 0;
struct net_device *device = dev_base;
_raw_read_lock(&dev_base_lock);
MOD_INC_USE_COUNT;
len += sprintf(page+len, "name\tnet\tnode\n");
while(device) {
/* only ip device for now */
if(device->atalk_ptr) {
struct atalk_iface *iface = atalk_find_dev(device);
while(iface) {
struct at_addr* addr = atalk_find_dev_addr(device);
if(addr) {
len += sprintf(page+len,
"%s\t%8.8x\t%8.8x\n",
iface->dev->name, addr->s_net, addr->s_node);
}
iface = iface->next;
}
}
device = device->next;
}
_raw_read_unlock(&dev_base_lock);
MOD_DEC_USE_COUNT;
return len;
}
#endif /* CONFIG_ATALK */
static int proc_net_if_init(void)
{
if(dev_base == NULL)
return -1;
proc_net_if = proc_mkdir("if", proc_net);
if(!proc_net_if) {
proc_net_if_cleanup();
return -1;
}
proc_net_if->owner = THIS_MODULE;
#ifdef CONFIG_INET
proc_net_if_inet = create_proc_info_entry("inet", (mode_t)0444,
proc_net_if,
proc_net_if_inet_info);
if(proc_net_if_inet == NULL) {
proc_net_if_cleanup();
return -1;
}
proc_net_if_inet->owner = THIS_MODULE;
#endif /* CONFIG_INET */
#ifdef CONFIG_IPV6
proc_net_if_ipv6 = create_proc_info_entry("ipv6", (mode_t)0444,
proc_net_if,
proc_net_if_ipv6_info);
if(proc_net_if_ipv6 == NULL) {
proc_net_if_cleanup();
return -1;
}
proc_net_if_ipv6->owner = THIS_MODULE;
#endif /* CONFIG_IPV6 */
#ifdef CONFIG_ATALK
proc_net_if_atalk = create_proc_info_entry("atalk", (mode_t)0444,
proc_net_if,
proc_net_if_atalk_info);
if(proc_net_if_atalk == NULL) {
proc_net_if_cleanup();
return -1;
}
proc_net_if_atalk->owner = THIS_MODULE;
#endif /* CONFIG_ATALK */
return 0;
}
static void proc_net_if_cleanup(void)
{
#ifdef CONFIG_INET
if(proc_net_if_inet)
remove_proc_entry("inet", proc_net_if_inet);
#endif /* CONFIG_INET */
#ifdef CONFIG_IPV6
if(proc_net_if_ipv6)
remove_proc_entry("ipv6", proc_net_if_ipv6);
#endif /* CONFIG_IPV6 */
#ifdef CONFIG_ATALK
if(proc_net_if_atalk)
remove_proc_entry("atalk", proc_net_if_atalk);
#endif /* CONFIG_ATALK */
if(proc_net_if)
remove_proc_entry("if", proc_net);
return;
}
#ifdef CONFIG_MODULES
module_init(proc_net_if_init);
module_exit(proc_net_if_cleanup);
MODULE_AUTHOR("Burton Samograd <kruhft@kruhft.dyndns.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("IPv4 network information listing system network devices");
EXPORT_NO_SYMBOLS;
#endif /* CONFIG_MODULES */
#endif /* CONFIG_PROC_FS */
#endif /* CONFIG_NET */
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2003-01-21 6:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030121062832.GC1736@kruhft.dyndns.org \
--to=kruhft@kruhft.dyndns.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®