Guys, I've got a machine generating all kinds of wierd errors.  It
failed 4 out of 8 drives on a 3ware card.  A reboot cleared all but 1
up, I've had alot of lag while the card is spitting errors etc.  I'm
about to launch this thing into the nearest highway I can find.

This morning I got this:

3w-xxxx: scsi1: PCI Parity Error: clearing.
EXT3-fs error (device md(9,2)): ext3_add_entry: bad entry in directory
#65: rec_len % 4 != 0 - offset=552, inode=93, rec_len=21, name_len=11
3w-xxxx: scsi2: PCI Parity Error: clearing.


Can I get an educated "oh, your card is bad" or "hmm, bad driver maybe?"
or something I can poke with a stick?  It's a brand new box with brand
new drives and controllers.  It was running great until last week.
Kernel 2.4.19 with 3ware driver 7.5.2 from their web page.

Robert


:wq!
---------------------------------------------------------------------------
Robert L. Harris                     | PGP Key ID: FC96D405
                               
DISCLAIMER:
      These are MY OPINIONS ALONE.  I speak for no-one else.
FYI:
 perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'