From: Charles Baylis <cb-lkml@fish.zetnet.co.uk>
To: linux-kernel@vger.kernel.org
Subject: [PCMCIA] [IDE] [2.5.59-mm7] Badness in kobject_register call trace
Date: Sat, 1 Feb 2003 23:25:07 +0000 [thread overview]
Message-ID: <200302012325.07397.cb-lkml@fish.zetnet.co.uk> (raw)
On inserting a PCMCIA compact flash adapter, I get this backtrace. I presume
this fits in the "yes, 2.5 IDE isn't finished yet" category. Other
information available on request.
--------------------------
hde: , CFA DISK drive
ide2 at 0x100-0x107,0x10e on irq 11
hde: lost interrupt
hde: task_no_data_intr: status=0x58 { DriveReady SeekComplete DataRequest }
hde: 253440 sectors (130 MB) w/1KiB Cache, CHS=495/16/32
hde:hde: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hde: drive not ready for command
hde1
hde: hde1
Badness in kobject_register at lib/kobject.c:152
Call Trace:
[<c018c994>] kobject_register+0x3c/0x54
[<c01698bb>] add_partition+0x4f/0x58
[<c01699ed>] register_disk+0xed/0x11c
[<c01ab503>] add_disk+0x33/0x40
[<c01ab4ac>] exact_match+0x0/0x8
[<c01ab4b4>] exact_lock+0x0/0x1c
[<c01bb387>] idedisk_attach+0x183/0x194
[<c01b7aea>] ata_attach+0x7e/0x178
[<c01b1d66>] ideprobe_init+0xbe/0xf0
[<c01b66fa>] ide_probe_module+0xe/0x10
[<c01b7137>] ide_register_hw+0x11f/0x154
[<c8d64272>] idecs_register+0x56/0x3729bde4 [ide_cs]
[<c011d0ac>] __release_region+0x24/0x68
[<c8d6477a>] ide_config+0x4fe/0x3729bd84 [ide_cs]
[<c8cd22a3>] pci_set_mem_map+0x27/0x3732dd84 [yenta_socket]
[<c8d4f000>] +0x0/0x372b1000 [pcmcia_core]
[<c8d4f14b>] read_cis_mem+0x103/0x372b0fb8 [pcmcia_core]
[<c8d4f6c2>] read_cis_cache+0x132/0x372b0a70 [pcmcia_core]
[<c8d4fdb5>] pcmcia_get_tuple_data+0x69/0x372b02b4 [pcmcia_core]
[<c8d50ee7>] pcmcia_parse_tuple+0xcf/0x372af1e8 [pcmcia_core]
[<c8d50ff1>] read_tuple+0x75/0x372af084 [pcmcia_core]
[<c0115774>] remap_area_pages+0x1c4/0x1fc
[<c8cd2d29>] yenta_set_mem_map+0x18d/0x3732d464 [yenta_socket]
[<c8cd5340>] +0x0/0x3732acc0 [yenta_socket]
[<c8d4fbd3>] pcmcia_get_next_tuple+0xa3/0x372b04d0 [pcmcia_core]
[<c8d4f9c9>] pcmcia_get_first_tuple+0x121/0x372b0758 [pcmcia_core]
[<c8d4f14b>] read_cis_mem+0x103/0x372b0fb8 [pcmcia_core]
[<c8d50fb2>] read_tuple+0x36/0x372af084 [pcmcia_core]
[<c8cd2d29>] yenta_set_mem_map+0x18d/0x3732d464 [yenta_socket]
[<c8cd5340>] +0x0/0x3732acc0 [yenta_socket]
[<c8cd22a3>] pci_set_mem_map+0x27/0x3732dd84 [yenta_socket]
[<c8d4f000>] +0x0/0x372b1000 [pcmcia_core]
[<c8d4f14b>] read_cis_mem+0x103/0x372b0fb8 [pcmcia_core]
[<c8d4f6c2>] read_cis_cache+0x132/0x372b0a70 [pcmcia_core]
[<c8d4fdb5>] pcmcia_get_tuple_data+0x69/0x372b02b4 [pcmcia_core]
[<c8d50ee7>] pcmcia_parse_tuple+0xcf/0x372af1e8 [pcmcia_core]
[<c8d50ff1>] read_tuple+0x75/0x372af084 [pcmcia_core]
[<c0115774>] remap_area_pages+0x1c4/0x1fc
[<c8cd2d29>] yenta_set_mem_map+0x18d/0x3732d464 [yenta_socket]
[<c8cd5340>] +0x0/0x3732acc0 [yenta_socket]
[<c8d4fbd3>] pcmcia_get_next_tuple+0xa3/0x372b04d0 [pcmcia_core]
[<c8d4f9c9>] pcmcia_get_first_tuple+0x121/0x372b0758 [pcmcia_core]
[<c8d4f14b>] read_cis_mem+0x103/0x372b0fb8 [pcmcia_core]
[<c8d50fb2>] read_tuple+0x36/0x372af084 [pcmcia_core]
[<c8d4f6c2>] read_cis_cache+0x132/0x372b0a70 [pcmcia_core]
[<c8d4fbab>] pcmcia_get_next_tuple+0x7b/0x372b04d0 [pcmcia_core]
[<c8d4fbd3>] pcmcia_get_next_tuple+0xa3/0x372b04d0 [pcmcia_core]
[<c8d51132>] pcmcia_validate_cis+0x132/0x372af000 [pcmcia_core]
[<c01418c3>] wake_up_buffer+0xb/0x28
[<c01418c3>] wake_up_buffer+0xb/0x28
[<c0179ce7>] do_get_write_access+0x583/0x5a4
[<c8d64a31>] ide_event+0x75/0x3729b644 [ide_cs]
[<c8d54489>] pcmcia_register_client+0x1fd/0x372abd74 [pcmcia_core]
[<c0171c45>] ext3_mark_iloc_dirty+0x21/0x54
[<c0171c56>] ext3_mark_iloc_dirty+0x32/0x54
[<c8cd2d29>] yenta_set_mem_map+0x18d/0x3732d464 [yenta_socket]
[<c8cd5340>] +0x0/0x3732acc0 [yenta_socket]
[<c8d5561e>] CardServices+0x1a6/0x372aab88 [pcmcia_core]
[<c8d4f017>] +0x17/0x372b1000 [pcmcia_core]
[<c8d64167>] ide_attach+0x13f/0x3729bfd8 [ide_cs]
[<c8d653a0>] dev_info+0x0/0x3729ac60 [ide_cs]
[<c8d649bc>] ide_event+0x0/0x3729b644 [ide_cs]
[<c8d3e5f7>] bind_request+0x15f/0x372c1b68 [ds]
[<c8d3e639>] bind_request+0x1a1/0x372c1b68 [ds]
[<c8d3f05d>] ds_ioctl+0x4d5/0x372c1478 [ds]
[<c01169fd>] __wake_up+0x41/0x60
[<c01d2964>] sock_def_readable+0x30/0x70
[<c0214090>] unix_dgram_sendmsg+0x380/0x3f8
[<c012d4ba>] __alloc_pages+0x7e/0x25c
[<c01cfc88>] __sock_sendmsg+0xa8/0xd4
[<c01cfd20>] sock_sendmsg+0x6c/0x88
[<c012d990>] get_page_state+0xc/0x10
[<c0133cfd>] zap_pmd_range+0x35/0x50
[<c0133d52>] unmap_page_range+0x3a/0x5c
[<c0133e58>] unmap_vmas+0xe4/0x1dc
[<c0136d49>] unmap_region+0x81/0xc4
[<c0136c99>] unmap_vma+0x69/0x70
[<c0136cba>] unmap_vma_list+0x1a/0x28
[<c0136feb>] do_munmap+0x127/0x134
[<c014f799>] sys_ioctl+0x20d/0x264
[<c0108a43>] syscall_call+0x7/0xb
next reply other threads:[~2003-02-01 23:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-01 23:25 Charles Baylis [this message]
2003-02-02 9:45 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200302012325.07397.cb-lkml@fish.zetnet.co.uk \
--to=cb-lkml@fish.zetnet.co.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®