From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 17 Feb 2003 09:29:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 17 Feb 2003 09:12:07 -0500 Received: from BELLINI.MIT.EDU ([18.62.3.197]:27421 "EHLO bellini.mit.edu") by vger.kernel.org with ESMTP id ; Mon, 17 Feb 2003 09:10:36 -0500 From: ghugh Song To: linux-kernel@vger.kernel.org Subject: Trouble w/ e1000 v4.4.19 for Intel gigabit 82545EM on-board chip. Message-Id: <20030217142025.A5BB51AFB4@bellini.mit.edu> Date: Mon, 17 Feb 2003 09:20:25 -0500 (EST) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Under SuSE-8.1-CDROM supplied 2.4.19-UP with e1000 v4.3.15 module, this ethernet worked on a E7505 based Supermicro X5DA8 Dual Xeon motherboard with the Intel 82545EM chip on board with no special kernel option inserted. The RJ45 is hooked to 100Mb/s speed CISCO switching hub. Now, e1000 v4.4.19 custom-built 2.4.21-pre4ac4 with SMP enabled does not work. e1000 is detected. It appeared properly in ifconfig with its own HWaddr. But it does not work. For the moment, netgear 100Mb/s card is inserted and enabled by module. And this one is working right now. Does anyone have a similar trouble with e1000? Thanks a lot. Regards to all the Kernel developers. G. Hugh Song