mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Osamu Tomita <tomita@cinet.co.jp>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCHSET] PC-9800 subarch. support for 2.5.61 (25/26) SMP
Date: Mon, 17 Feb 2003 23:25:00 +0900	[thread overview]
Message-ID: <20030217142500.GY4799@yuzuki.cinet.co.jp> (raw)
In-Reply-To: <20030217134333.GA4734@yuzuki.cinet.co.jp>

This is patchset to support NEC PC-9800 subarchitecture
against 2.5.61 (25/26).

SMP support for PC98.

diff -Nru linux-2.5.61/arch/i386/kernel/io_apic.c linux98-2.5.61/arch/i386/kernel/io_apic.c
--- linux-2.5.61/arch/i386/kernel/io_apic.c	2003-02-15 08:51:26.000000000 +0900
+++ linux98-2.5.61/arch/i386/kernel/io_apic.c	2003-02-15 13:23:49.000000000 +0900
@@ -37,6 +37,7 @@
 #include <asm/desc.h>
 
 #include <mach_apic.h>
+#include <io_ports.h>
 
 #undef APIC_LOCKUP_DEBUG
 
@@ -668,7 +669,9 @@
 
 		if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
 		     mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
-		     mp_bus_id_to_type[lbus] == MP_BUS_MCA) &&
+		     mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+		    ) &&
 		    (mp_irqs[i].mpc_irqtype == type) &&
 		    (mp_irqs[i].mpc_srcbusirq == irq))
 
@@ -762,6 +765,12 @@
 #define default_MCA_trigger(idx)	(1)
 #define default_MCA_polarity(idx)	(0)
 
+/* NEC98 interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_NEC98_trigger(idx)     (0)
+#define default_NEC98_polarity(idx)    (0)
+
 static int __init MPBIOS_polarity(int idx)
 {
 	int bus = mp_irqs[idx].mpc_srcbus;
@@ -796,6 +805,11 @@
 					polarity = default_MCA_polarity(idx);
 					break;
 				}
+				case MP_BUS_NEC98: /* NEC 98 pin */
+				{
+					polarity = default_NEC98_polarity(idx);
+					break;
+				}
 				default:
 				{
 					printk(KERN_WARNING "broken BIOS!!\n");
@@ -865,6 +879,11 @@
 					trigger = default_MCA_trigger(idx);
 					break;
 				}
+				case MP_BUS_NEC98: /* NEC 98 pin */
+				{
+					trigger = default_NEC98_trigger(idx);
+					break;
+				}
 				default:
 				{
 					printk(KERN_WARNING "broken BIOS!!\n");
@@ -926,6 +945,7 @@
 		case MP_BUS_ISA: /* ISA pin */
 		case MP_BUS_EISA:
 		case MP_BUS_MCA:
+		case MP_BUS_NEC98:
 		{
 			irq = mp_irqs[idx].mpc_srcbusirq;
 			break;
@@ -2034,7 +2054,7 @@
  * Additionally, something is definitely wrong with irq9
  * on PIIX4 boards.
  */
-#define PIC_IRQS	(1<<2)
+#define PIC_IRQS	(1 << PIC_CASCADE_IR)
 
 void __init setup_IO_APIC(void)
 {
diff -Nru linux-2.5.61/arch/i386/kernel/mpparse.c linux98-2.5.61/arch/i386/kernel/mpparse.c
--- linux-2.5.61/arch/i386/kernel/mpparse.c	2003-02-15 08:51:26.000000000 +0900
+++ linux98-2.5.61/arch/i386/kernel/mpparse.c	2003-02-16 17:19:03.000000000 +0900
@@ -33,6 +33,7 @@
 
 #include <mach_apic.h>
 #include <mach_mpparse.h>
+#include <bios_ebda.h>
 
 /* Have we found an MP table */
 int smp_found_config;
@@ -209,6 +210,8 @@
 		mp_current_pci_id++;
 	} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
+	} else if (strncmp(str, BUSTYPE_NEC98, sizeof(BUSTYPE_NEC98)-1) == 0) {
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_NEC98;
 	} else {
 		printk("Unknown bustype %s - ignoring\n", str);
 	}
@@ -651,7 +654,8 @@
 		 * Read the physical hardware table.  Anything here will
 		 * override the defaults.
 		 */
-		if (!smp_read_mpc((void *)mpf->mpf_physptr)) {
+		if (!smp_read_mpc(pc98 ? phys_to_virt(mpf->mpf_physptr)
+					: (void *)mpf->mpf_physptr)) {
 			smp_found_config = 0;
 			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
 			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
@@ -705,8 +709,23 @@
 			printk("found SMP MP-table at %08lx\n",
 						virt_to_phys(mpf));
 			reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
-			if (mpf->mpf_physptr)
-				reserve_bootmem(mpf->mpf_physptr, PAGE_SIZE);
+			if (mpf->mpf_physptr) {
+				/*
+				 * We cannot access to MPC table to compute
+				 * table size yet, as only few megabytes from
+				 * the bottom is mapped now.
+				 * PC-9800's MPC table places on the very last
+				 * of physical memory; so that simply reserving
+				 * PAGE_SIZE from mpg->mpf_physptr yields BUG()
+				 * in reserve_bootmem.
+				 */
+				unsigned long size = PAGE_SIZE;
+				unsigned long end = max_low_pfn * PAGE_SIZE;
+				if (mpf->mpf_physptr + size > end)
+					size = end - mpf->mpf_physptr;
+				reserve_bootmem(mpf->mpf_physptr, size);
+			}
+
 			mpf_found = mpf;
 			return 1;
 		}
@@ -749,11 +768,12 @@
 	 * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
 	 */
 
-	address = *(unsigned short *)phys_to_virt(0x40E);
-	address <<= 4;
-	smp_scan_config(address, 0x400);
-	if (smp_found_config)
-		printk(KERN_WARNING "WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!\n");
+	address = get_bios_ebda();
+	if (address) {
+		smp_scan_config(address, 0x400);
+		if (smp_found_config)
+			printk(KERN_WARNING "WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!\n");
+	}
 }
 
 
diff -Nru linux-2.5.61/arch/i386/kernel/smpboot.c linux98-2.5.61/arch/i386/kernel/smpboot.c
--- linux-2.5.61/arch/i386/kernel/smpboot.c	2003-02-15 08:51:44.000000000 +0900
+++ linux98-2.5.61/arch/i386/kernel/smpboot.c	2003-02-15 15:04:28.000000000 +0900
@@ -823,13 +823,27 @@
 
 	store_NMI_vector(&nmi_high, &nmi_low);
 
+#ifndef CONFIG_X86_PC9800
 	CMOS_WRITE(0xa, 0xf);
+#else
+	/* reset code is stored in 8255 on PC-9800. */
+	outb(0x0e, 0x37);	/* SHUT0 = 0 */
+#endif
 	local_flush_tlb();
 	Dprintk("1.\n");
 	*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
 	Dprintk("2.\n");
 	*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
 	Dprintk("3.\n");
+#ifdef CONFIG_X86_PC9800
+	/*
+	 * On PC-9800, continuation on warm reset is done by loading
+	 * %ss:%sp from 0x0000:0404 and executing 'lret', so:
+	 */
+	/* 0x3f0 is on unused interrupt vector and should be safe... */
+	*((volatile unsigned long *) phys_to_virt(0x404)) = 0x000003f0;
+	Dprintk("4.\n");
+#endif
 
 	/*
 	 * Starting actual IPI sequence...
diff -Nru linux/include/asm-i386/mach-default/bios_ebda.h linux98/include/asm-i386/mach-default/bios_ebda.h
--- linux/include/asm-i386/mach-default/bios_ebda.h	1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-default/bios_ebda.h	2002-12-18 22:40:38.000000000 +0900
@@ -0,0 +1,15 @@
+#ifndef _MACH_BIOS_EBDA_H
+#define _MACH_BIOS_EBDA_H
+
+/*
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
+static inline unsigned int get_bios_ebda(void)
+{
+	unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
+	address <<= 4;
+	return address;	/* 0 means none */
+}
+
+#endif /* _MACH_BIOS_EBDA_H */
diff -Nru linux/include/asm-i386/mach-pc9800/bios_ebda.h linux98/include/asm-i386/mach-pc9800/bios_ebda.h
--- linux/include/asm-i386/mach-pc9800/bios_ebda.h	1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/bios_ebda.h	2002-12-18 22:49:59.000000000 +0900
@@ -0,0 +1,14 @@
+#ifndef _MACH_BIOS_EBDA_H
+#define _MACH_BIOS_EBDA_H
+
+/*
+ * PC-9800 has no EBDA.
+ * Its BIOS uses 0x40E for other purpose,
+ * Not pointer to 4K EBDA area.
+ */
+static inline unsigned int get_bios_ebda(void)
+{
+	return 0;	/* 0 means none */
+}
+
+#endif /* _MACH_BIOS_EBDA_H */
diff -Nru linux/include/asm-i386/mach-pc9800/mach_wakecpu.h linux98/include/asm-i386/mach-pc9800/mach_wakecpu.h
--- linux/include/asm-i386/mach-pc9800/mach_wakecpu.h	1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/mach_wakecpu.h	2003-01-10 11:40:16.000000000 +0900
@@ -0,0 +1,45 @@
+#ifndef __ASM_MACH_WAKECPU_H
+#define __ASM_MACH_WAKECPU_H
+
+/* 
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#define WAKE_SECONDARY_VIA_INIT
+
+/*
+ * On PC-9800, continuation on warm reset is done by loading
+ * %ss:%sp from 0x0000:0404 and executing 'lret', so:
+ */
+#define TRAMPOLINE_LOW phys_to_virt(0x4fa)
+#define TRAMPOLINE_HIGH phys_to_virt(0x4fc)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert));
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff -Nru linux/include/asm-i386/mach-pc9800/smpboot_hooks.h linux98/include/asm-i386/mach-pc9800/smpboot_hooks.h
--- linux/include/asm-i386/mach-pc9800/smpboot_hooks.h	1970-01-01 09:00:00.000000000 +0900
+++ linux98/include/asm-i386/mach-pc9800/smpboot_hooks.h	2002-09-22 06:56:46.000000000 +0900
@@ -0,0 +1,33 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+	io_apic_irqs = 0;
+}
+
+static inline void smpboot_setup_warm_reset_vector(void)
+{
+	/*
+	 * Install writable page 0 entry to set BIOS data area.
+	 */
+	local_flush_tlb();
+
+	/*
+	 * Paranoid:  Set warm reset code and vector here back
+	 * to default values.
+	 */
+	outb(0x0f, 0x37);	/* SHUT0 = 1 */
+
+	*((volatile long *) phys_to_virt(0x404)) = 0;
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+	/*
+	 * Here we can be sure that there is an IO-APIC in the system. Let's
+	 * go and set it up:
+	 */
+	if (!skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+}

  parent reply	other threads:[~2003-02-17 14:18 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-02-17 13:43 [PATCHSET] PC-9800 subarch. support for 2.5.61 (0/26) summary Osamu Tomita
2003-02-17 13:48 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (1/26) ALSA Osamu Tomita
2003-02-17 13:49 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (2/26) APM Osamu Tomita
2003-02-18 10:37   ` Christoph Hellwig
2003-02-17 13:51 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (3/26) mach-pc9800 Osamu Tomita
2003-02-17 14:48   ` Sam Ravnborg
2003-02-17 15:35     ` Osamu Tomita
2003-02-18 10:39   ` Christoph Hellwig
2003-02-17 13:54 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (4/26) boot Osamu Tomita
2003-02-17 13:56 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (5/26) char device Osamu Tomita
2003-02-18 10:45   ` Christoph Hellwig
2003-02-17 14:03 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (6/26) console Osamu Tomita
2003-02-17 14:06 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (7/26) misc core Osamu Tomita
2003-02-17 14:07 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (8/26) core Osamu Tomita
2003-02-17 14:58   ` Sam Ravnborg
2003-02-17 14:08 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (9/26) DMA Osamu Tomita
2003-02-17 14:09 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (10/26) floppy #1 Osamu Tomita
2003-02-17 14:09 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (11/26) floppy #2 Osamu Tomita
2003-02-17 14:10 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (12/26) FS Osamu Tomita
2003-02-17 14:11 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (13/26) IDE Osamu Tomita
2003-02-17 14:12 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (14/26) input Osamu Tomita
2003-03-14  8:22   ` Vojtech Pavlik
2003-03-15  6:09     ` Osamu Tomita
2003-03-15  8:01       ` Vojtech Pavlik
2003-02-17 14:13 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (15/26) kanji Osamu Tomita
2003-02-17 14:15 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (16/26) NIC Osamu Tomita
2003-02-17 17:02   ` Jeff Garzik
2003-02-17 18:06     ` Brian Gerst
2003-02-17 18:33       ` Jeff Garzik
2003-02-17 19:02       ` YOSHIFUJI Hideaki / 吉藤英明
2003-02-17 14:16 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (17/26) parport Osamu Tomita
2003-02-17 14:17 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (18/26) PCI Osamu Tomita
2003-02-17 14:18 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (19/26) PCI BIOS Osamu Tomita
2003-02-17 14:18 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (20/26) PCMCIA Osamu Tomita
2003-02-17 14:19 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (21/26) PNP Osamu Tomita
2003-02-17 14:20 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (22/26) reboot Osamu Tomita
2003-02-17 14:21 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (23/26) SCSI Osamu Tomita
2003-02-18 10:54   ` 'Christoph Hellwig'
2003-02-17 14:24 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (24/26) serial Osamu Tomita
2003-02-17 14:25 ` Osamu Tomita [this message]
2003-02-17 14:26 ` [PATCHSET] PC-9800 subarch. support for 2.5.61 (26/26) video card Osamu Tomita

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20030217142500.GY4799@yuzuki.cinet.co.jp \
    --to=tomita@cinet.co.jp \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®