From: Daniele Venzano <webvenza@libero.it>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] add prink KERN_* suffixes
Date: Fri, 14 Mar 2003 19:45:55 +0100 [thread overview]
Message-ID: <20030314184555.GF1140@renditai.milesteg.arr> (raw)
In-Reply-To: <1047591779.1226.16.camel@icbm>
[-- Attachment #1.1: Type: text/plain, Size: 669 bytes --]
> The loglevels only work after a newline.
That's sane... I could think to it by myself in the first place. :-(
Here there are new patches, checked out for the newline stuff, always
against 2.5.64 and modifing the following files from drivers/net/:
3c509.c (first patch)
8390.c (second patch)
hp.c and hldc.c (third patch)
I also made similar work on 3c503.c, but I had to run it through indent
before, so the patch is big (~35k uncompressed). It can be found (with
all the others) at:
http://digilander.libero.it/webvenza/kernel_patches.html
--
----------------------------------------
Daniele Venzano
Web: http://digilander.iol.it/webvenza/
[-- Attachment #1.2: 3c509_printk.diff --]
[-- Type: text/plain, Size: 7819 bytes --]
diff -urN -X /home/venza/kernel/dontdiff linux-2.5.64/drivers/net/3c509.c linux-2.5.64-work/drivers/net/3c509.c
--- linux-2.5.64/drivers/net/3c509.c 2003-03-14 17:37:53.000000000 +0100
+++ linux-2.5.64-work/drivers/net/3c509.c 2003-03-14 17:56:05.000000000 +0100
@@ -316,7 +316,7 @@
{
const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
- printk("%s: 3c5x9 at %#3.3lx, %s port, address ",
+ printk(KERN_INFO "%s: 3c5x9 at %#3.3lx, %s port, address ",
dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)]);
}
@@ -399,7 +399,7 @@
}
irq = pnp_irq(idev, 0);
if (el3_debug > 3)
- printk ("ISAPnP reports %s at i/o 0x%x, irq %d\n",
+ printk (KERN_DEBUG "ISAPnP reports %s at i/o 0x%x, irq %d\n",
(char*) el3_isapnp_adapters[i].driver_data, ioaddr, irq);
EL3WINDOW(0);
for (j = 0; j < 3; j++)
@@ -432,7 +432,7 @@
}
if (id_port >= 0x200) {
/* Rare -- do we really need a warning? */
- printk(" WARNING: No I/O port available for 3c509 activation.\n");
+ printk(KERN_WARNING " No I/O port available for 3c509 activation.\n");
return -ENODEV;
}
/* Next check for all ISA bus boards by sending the ID sequence to the
@@ -475,7 +475,7 @@
phys_addr[2] == el3_isapnp_phys_addr[i][2])
{
if (el3_debug > 3)
- printk("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+ printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
phys_addr[0] & 0xff, phys_addr[0] >> 8,
phys_addr[1] & 0xff, phys_addr[1] >> 8,
phys_addr[2] & 0xff, phys_addr[2] >> 8);
@@ -586,7 +586,7 @@
irq = pos5 & 0x0f;
- printk("3c529: found %s at slot %d\n",
+ printk(KERN_INFO "3c529: found %s at slot %d\n",
el3_mca_adapter_names[mdev->index], slot + 1);
/* claim the slot */
@@ -599,7 +599,7 @@
irq = mca_device_transform_irq(mdev, irq);
ioaddr = mca_device_transform_ioport(mdev, ioaddr);
if (el3_debug > 2) {
- printk("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
+ printk(KERN_DEBUG "3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
EL3WINDOW(0);
for (i = 0; i < 3; i++) {
@@ -721,7 +721,7 @@
word = (word << 1) + (inb(id_port) & 0x01);
if (el3_debug > 3)
- printk(" 3c509 EEPROM word %d %#4.4x.\n", index, word);
+ printk(KERN_DEBUG " 3c509 EEPROM word %d %#4.4x.\n", index, word);
return word;
}
@@ -742,13 +742,13 @@
EL3WINDOW(0);
if (el3_debug > 3)
- printk("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
+ printk(KERN_DEBUG "%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
el3_up(dev);
if (el3_debug > 3)
- printk("%s: Opened 3c509 IRQ %d status %4.4x.\n",
+ printk(KERN_DEBUG "%s: Opened 3c509 IRQ %d status %4.4x.\n",
dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
return 0;
@@ -761,7 +761,7 @@
int ioaddr = dev->base_addr;
/* Transmitter timeout, serious problems. */
- printk("%s: transmit timed out, Tx_status %2.2x status %4.4x "
+ printk(KERN_ERR "%s: transmit timed out, Tx_status %2.2x status %4.4x "
"Tx FIFO room %d.\n",
dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
inw(ioaddr + TX_FREE));
@@ -786,7 +786,7 @@
lp->stats.tx_bytes += skb->len;
if (el3_debug > 4) {
- printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+ printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
dev->name, skb->len, inw(ioaddr + EL3_STATUS));
}
#if 0
@@ -867,7 +867,7 @@
int i = max_interrupt_work;
if (dev == NULL) {
- printk ("el3_interrupt(): irq %d for unknown device.\n", irq);
+ printk (KERN_INFO "el3_interrupt(): irq %d for unknown device.\n", irq);
return;
}
@@ -878,7 +878,7 @@
if (el3_debug > 4) {
status = inw(ioaddr + EL3_STATUS);
- printk("%s: interrupt, status %4.4x.\n", dev->name, status);
+ printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status);
}
while ((status = inw(ioaddr + EL3_STATUS)) &
@@ -889,7 +889,7 @@
if (status & TxAvailable) {
if (el3_debug > 5)
- printk(" TX room bit was handled.\n");
+ printk(KERN_DEBUG " TX room bit was handled.\n");
/* There's room in the FIFO for a full-sized packet. */
outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
netif_wake_queue (dev);
@@ -928,7 +928,7 @@
}
if (--i < 0) {
- printk("%s: Infinite loop in interrupt, status %4.4x.\n",
+ printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n",
dev->name, status);
/* Clear all interrupts. */
outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -939,7 +939,7 @@
}
if (el3_debug > 4) {
- printk("%s: exiting interrupt, status %4.4x.\n", dev->name,
+ printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name,
inw(ioaddr + EL3_STATUS));
}
spin_unlock(&lp->lock);
@@ -975,7 +975,7 @@
int ioaddr = dev->base_addr;
if (el3_debug > 5)
- printk(" Updating the statistics.\n");
+ printk(KERN_DEBUG " Updating the statistics.\n");
/* Turn off statistics updates while reading. */
outw(StatsDisable, ioaddr + EL3_CMD);
/* Switch to the stats window, and read everything. */
@@ -1006,7 +1006,7 @@
short rx_status;
if (el3_debug > 5)
- printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ printk(KERN_DEBUG " In rx_packet(), status %4.4x, rx_status %4.4x.\n",
inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
if (rx_status & 0x4000) { /* Error, update stats. */
@@ -1029,7 +1029,7 @@
skb = dev_alloc_skb(pkt_len+5);
lp->stats.rx_bytes += pkt_len;
if (el3_debug > 4)
- printk("Receiving packet size %d status %4.4x.\n",
+ printk(KERN_DEBUG "Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
if (skb != NULL) {
skb->dev = dev;
@@ -1054,7 +1054,7 @@
outw(RxDiscard, ioaddr + EL3_CMD);
lp->stats.rx_dropped++;
if (el3_debug)
- printk("%s: Couldn't allocate a sk_buff of size %d.\n",
+ printk(KERN_DEBUG "%s: Couldn't allocate a sk_buff of size %d.\n",
dev->name, pkt_len);
}
inw(ioaddr + EL3_STATUS); /* Delay. */
@@ -1080,7 +1080,7 @@
static int old;
if (old != dev->mc_count) {
old = dev->mc_count;
- printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
+ printk(KERN_INFO "%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
}
}
spin_lock_irqsave(&lp->lock, flags);
@@ -1103,7 +1103,7 @@
struct el3_private *lp = (struct el3_private *)dev->priv;
if (el3_debug > 2)
- printk("%s: Shutting down ethercard.\n", dev->name);
+ printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
el3_down(dev);
@@ -1409,7 +1409,7 @@
EL3WINDOW(4);
net_diag = inw(ioaddr + WN4_NETDIAG);
net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */
- printk("%s: ", dev->name);
+ printk(KERN_INFO "%s: ", dev->name);
switch (dev->if_port & 0x0c) {
case 12:
/* force full-duplex mode if 3c5x9b */
@@ -1432,7 +1432,7 @@
outw(net_diag, ioaddr + WN4_NETDIAG);
printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
if (el3_debug > 3)
- printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
+ printk(KERN_DEBUG "%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
/* Enable link beat and jabber check. */
outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
}
[-- Attachment #1.3: 8390_printk.diff --]
[-- Type: text/plain, Size: 1956 bytes --]
diff -urN -X /home/venza/kernel/dontdiff linux-2.5.64/drivers/net/8390.c linux-2.5.64-work/drivers/net/8390.c
--- linux-2.5.64/drivers/net/8390.c 2003-03-14 17:37:53.000000000 +0100
+++ linux-2.5.64-work/drivers/net/8390.c 2003-03-14 17:56:05.000000000 +0100
@@ -430,7 +430,7 @@
if (dev == NULL)
{
- printk ("net_interrupt(): irq %d for unknown device.\n", irq);
+ printk (KERN_INFO "net_interrupt(): irq %d for unknown device.\n", irq);
return;
}
@@ -448,8 +448,8 @@
#if 1 /* This might just be an interrupt for a PCI device sharing this line */
/* The "irqlock" check is only for testing. */
printk(ei_local->irqlock
- ? "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n"
- : "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n",
+ ? KERN_DEBUG "%s: Interrupted while interrupts are masked! isr=%#2x imr=%#2x.\n"
+ : KERN_DEBUG "%s: Reentering the interrupt handler! isr=%#2x imr=%#2x.\n",
dev->name, inb_p(e8390_base + EN0_ISR),
inb_p(e8390_base + EN0_IMR));
#endif
@@ -615,7 +615,7 @@
else if (ei_local->tx2 < 0)
{
if (ei_local->lasttx != 2 && ei_local->lasttx != -2)
- printk("%s: bogus last_tx_buffer %d, tx2=%d.\n",
+ printk(KERN_ERR "%s: bogus last_tx_buffer %d, tx2=%d.\n",
ei_local->name, ei_local->lasttx, ei_local->tx2);
ei_local->tx2 = 0;
if (ei_local->tx1 > 0)
@@ -782,7 +782,7 @@
/* This _should_ never happen: it's here for avoiding bad clones. */
if (next_frame >= ei_local->stop_page) {
- printk("%s: next frame inconsistency, %#2x\n", dev->name,
+ printk(KERN_ERR "%s: next frame inconsistency, %#2x\n", dev->name,
next_frame);
next_frame = ei_local->rx_start_page;
}
@@ -1008,7 +1008,7 @@
int ethdev_init(struct net_device *dev)
{
if (ei_debug > 1)
- printk(version);
+ printk(KERN_DEBUG version);
if (dev->priv == NULL)
{
[-- Attachment #1.4: slhc_hp_printk.diff --]
[-- Type: text/plain, Size: 3595 bytes --]
diff -urN -X /home/venza/kernel/dontdiff linux-2.5.64/drivers/net/hp.c linux-2.5.64-work/drivers/net/hp.c
--- linux-2.5.64/drivers/net/hp.c 2002-11-30 15:07:12.000000000 +0100
+++ linux-2.5.64-work/drivers/net/hp.c 2003-03-14 17:56:05.000000000 +0100
@@ -129,16 +129,16 @@
}
if (ei_debug && version_printed++ == 0)
- printk(version);
+ printk(KERN_INFO version);
/* Allocate dev->priv and fill in 8390 specific dev fields. */
if (ethdev_init(dev)) {
- printk (" unable to get memory for dev->priv.\n");
+ printk (KERN_ERR " unable to get memory for dev->priv.\n");
retval = -ENOMEM;
goto out;
}
- printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
+ printk(KERN_NOTICE "%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
for(i = 0; i < ETHER_ADDR_LEN; i++)
printk(" %2.2x", dev->dev_addr[i] = inb(ioaddr + i));
@@ -223,7 +223,7 @@
int hp_base = dev->base_addr - NIC_OFFSET;
int saved_config = inb_p(hp_base + HP_CONFIGURE);
- if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
+ if (ei_debug > 1) printk(KERN_DEBUG "resetting the 8390 time=%ld...", jiffies);
outb_p(0x00, hp_base + HP_CONFIGURE);
ei_status.txing = 0;
/* Pause just a few cycles for the hardware reset to take place. */
@@ -235,7 +235,7 @@
if ((inb_p(hp_base+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
printk("%s: hp_reset_8390() did not complete.\n", dev->name);
- if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
+ if (ei_debug > 1) printk("8390 reset done (%ld).\n", jiffies);
return;
}
@@ -295,7 +295,7 @@
int addr = (high << 8) + low;
/* Check only the lower 8 bits so we can ignore ring wrap. */
if (((ring_offset + xfer_count) & 0xff) != (addr & 0xff))
- printk("%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
+ printk(KERN_WARNING "%s: RX transfer address mismatch, %#4.4x vs. %#4.4x (actual).\n",
dev->name, ring_offset + xfer_count, addr);
}
outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
@@ -352,7 +352,7 @@
int low = inb_p(nic_base + EN0_RSARLO);
int addr = (high << 8) + low;
if ((start_page << 8) + count != addr)
- printk("%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
+ printk(KERN_WARNING "%s: TX Transfer address mismatch, %#4.4x vs. %#4.4x.\n",
dev->name, (start_page << 8) + count, addr);
}
outb_p(saved_config & (~HP_DATAON), nic_base - NIC_OFFSET + HP_CONFIGURE);
diff -urN -X /home/venza/kernel/dontdiff linux-2.5.64/drivers/net/slhc.c linux-2.5.64-work/drivers/net/slhc.c
--- linux-2.5.64/drivers/net/slhc.c 2003-03-14 17:37:55.000000000 +0100
+++ linux-2.5.64-work/drivers/net/slhc.c 2003-03-14 17:56:05.000000000 +0100
@@ -696,7 +696,7 @@
void slhc_i_status(struct slcompress *comp)
{
if (comp != NULLSLCOMPR) {
- printk("\t%d Cmp, %d Uncmp, %d Bad, %d Tossed\n",
+ printk(KERN_INFO "\t%d Cmp, %d Uncmp, %d Bad, %d Tossed\n",
comp->sls_i_compressed,
comp->sls_i_uncompressed,
comp->sls_i_error,
@@ -708,12 +708,12 @@
void slhc_o_status(struct slcompress *comp)
{
if (comp != NULLSLCOMPR) {
- printk("\t%d Cmp, %d Uncmp, %d AsIs, %d NotTCP\n",
+ printk(KERN_INFO "\t%d Cmp, %d Uncmp, %d AsIs, %d NotTCP\n",
comp->sls_o_compressed,
comp->sls_o_uncompressed,
comp->sls_o_tcp,
comp->sls_o_nontcp);
- printk("\t%10d Searches, %10d Misses\n",
+ printk(KERN_INFO "\t%10d Searches, %10d Misses\n",
comp->sls_o_searches,
comp->sls_o_misses);
}
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
prev parent reply other threads:[~2003-03-14 18:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-13 16:41 Daniele Venzano
2003-03-13 17:22 ` Andreas Schwab
2003-03-13 21:43 ` Robert Love
2003-03-14 18:45 ` Daniele Venzano [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20030314184555.GF1140@renditai.milesteg.arr \
--to=webvenza@libero.it \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®